Show patches with: State = Action Required       |    Archived = No       |   514 patches
« 1 2 3 45 6 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[1/3] dt-bindings: usb: mtk-xhci: Allow wakeup interrupt-names to be optional Fixes for dtbs_check warnings on Mediatek XHCI nodes 1 1 - --- 2022-06-17 Nícolas F. R. A. Prado Needs ACK
[2/3] dt-bindings: usb: mtk-xhci: Allow middle optional clocks to be missing Fixes for dtbs_check warnings on Mediatek XHCI nodes - - - --- 2022-06-17 Nícolas F. R. A. Prado Needs ACK
[1/2] Make cp210x respond to modem status changes (CTS, DSR, RI, DCD) by default. Enable modem line status events on cp210x, add support for PPS on RI pin - - - --- 2023-10-09 Brian Kloppenborg New
[2/2] Make cp210x register GPS PPS signals on the RI pin. Enable modem line status events on cp210x, add support for PPS on RI pin - - - --- 2023-10-09 Brian Kloppenborg New
[1/2] Documentation: usb: Update NCM configfs parameters [1/2] Documentation: usb: Update NCM configfs parameters - - - --- 2023-10-09 Krishna Kurapati PSSNV New
[2/2] usb: gadget: ncm: Add support to update wMaxSegmentSize via configfs [1/2] Documentation: usb: Update NCM configfs parameters - - - --- 2023-10-09 Krishna Kurapati PSSNV New
[6/7] fs/sysfs/group: make attribute_group pointers const Untitled series #791403 - - - --- 2023-10-09 Max Kellermann New
usb: gadget: function fs req_match endpoint address fix usb: gadget: function fs req_match endpoint address fix - - - --- 2023-10-09 sensoray-dev New
media: imon: fix stall in worker_thread media: imon: fix stall in worker_thread - - - --- 2023-10-10 Edward AD New
[v2,1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub [v2,1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub - - - --- 2023-10-11 Anand Moon New
[RFC] usb: dwc3: core: Fix RAM interface getting stuck during enumeration [RFC] usb: dwc3: core: Fix RAM interface getting stuck during enumeration - - - --- 2023-10-11 Krishna Kurapati PSSNV New
[RFT,v8,1/6] ARM: pxa: Convert Spitz OHCI to GPIO descriptors ARM: pxa: GPIO descriptor conversions - 2 - --- 2023-10-11 Duje Mihanović New
[RFT,v8,2/6] ARM: pxa: Convert Spitz LEDs to GPIO descriptors ARM: pxa: GPIO descriptor conversions - 2 - --- 2023-10-11 Duje Mihanović New
[RFT,v8,3/6] ARM: pxa: Convert Spitz CF power control to GPIO descriptors ARM: pxa: GPIO descriptor conversions 1 1 - --- 2023-10-11 Duje Mihanović New
[RFT,v8,4/6] ARM: pxa: Convert reset driver to GPIO descriptors ARM: pxa: GPIO descriptor conversions 1 1 - --- 2023-10-11 Duje Mihanović New
[RFT,v8,5/6] ARM: pxa: Convert gumstix Bluetooth to GPIO descriptors ARM: pxa: GPIO descriptor conversions - 2 - --- 2023-10-11 Duje Mihanović New
[RFT,v8,6/6] input: ads7846: Move wait_for_sync() logic to driver ARM: pxa: GPIO descriptor conversions 1 2 - --- 2023-10-11 Duje Mihanović New
[v4] usb: core: hub: Add quirks for reducing device address timeout [v4] usb: core: hub: Add quirks for reducing device address timeout - - - --- 2023-10-11 Hardik Gajjar New
[v4] usb: host: xhci: Avoid XHCI resume delay if SSUSB device is not present [v4] usb: host: xhci: Avoid XHCI resume delay if SSUSB device is not present - - - --- 2023-10-11 Wesley Cheng New
[RFC] usb: dwc3: dwc3-octeon: Fix USB PHY High-Speed PLL Initialization [RFC] usb: dwc3: dwc3-octeon: Fix USB PHY High-Speed PLL Initialization - - - --- 2023-10-12 Ladislav Michl New
usb: dwc3: core: enable CCI support usb: dwc3: core: enable CCI support - - - --- 2023-10-13 Mehta, Piyush New
[v2,09/10] thunderbolt: Add support for asymmetric link thunderbolt: USB4 v2 asymmetric switching and more - - - --- 2023-10-13 Mika Westerberg New
usbutils: lsusb-t: print entries for devices with no interfaces usbutils: lsusb-t: print entries for devices with no interfaces - - - --- 2023-10-13 Alan Stern New
[v1] usb: typec: tcpm: Check for sink pdp op current only for pd [v1] usb: typec: tcpm: Check for sink pdp op current only for pd - - - --- 2023-10-14 Badhri Jagan Sridharan New
usb: typec: retimer: Check dev_set_name() return value usb: typec: retimer: Check dev_set_name() return value - - - --- 2023-10-14 Zhang Shurong New
[3/7] usb-storage: use fflags index only in usb-storage driver usb-storage,uas: Support OPAL commands on USB attached devices. - 1 - --- 2023-10-16 Milan Broz New
[4/7] usb-storage,uas: use host helper to generate driver info usb-storage,uas: Support OPAL commands on USB attached devices. - - - --- 2023-10-16 Milan Broz New
[5/7] usb-storage,uas: do not convert device_info for 64-bit platforms usb-storage,uas: Support OPAL commands on USB attached devices. - - - --- 2023-10-16 Milan Broz New
[6/7] usb-storage,uas: enable security commands for USB-attached storage usb-storage,uas: Support OPAL commands on USB attached devices. - - - --- 2023-10-16 Milan Broz New
[7/7] usb-storage,uas: disable security commands (OPAL) for RT9210 chip family usb-storage,uas: Support OPAL commands on USB attached devices. - - - --- 2023-10-16 Milan Broz New
[v1] usb: typec: tcpm: only discover modes the port supports svids for [v1] usb: typec: tcpm: only discover modes the port supports svids for - - - --- 2023-10-16 RD Babiera New
[01/12] dt-bindings: usb: qcom,dwc3: Add qcom,sc8180x-dwc3 usb: dwc3: qcom: Flatten dwc3 structure - - - --- 2023-10-17 Bjorn Andersson New
[02/12] usb: dwc3: qcom: Rename dwc3 platform_device reference usb: dwc3: qcom: Flatten dwc3 structure - 1 - --- 2023-10-17 Bjorn Andersson New
[03/12] usb: dwc3: qcom: Merge resources from urs_usb device usb: dwc3: qcom: Flatten dwc3 structure - - - --- 2023-10-17 Bjorn Andersson New
[04/12] usb: dwc3: Expose core driver as library usb: dwc3: qcom: Flatten dwc3 structure - - - --- 2023-10-17 Bjorn Andersson New
[05/12] usb: dwc3: Override end of dwc3 memory resource usb: dwc3: qcom: Flatten dwc3 structure 1 - - --- 2023-10-17 Bjorn Andersson New
[06/12] usb: dwc3: qcom: Add dwc3 core reference in driver state usb: dwc3: qcom: Flatten dwc3 structure - - - --- 2023-10-17 Bjorn Andersson New
[07/12] usb: dwc3: qcom: Instantiate dwc3 core directly usb: dwc3: qcom: Flatten dwc3 structure - - - --- 2023-10-17 Bjorn Andersson New
[08/12] usb: dwc3: qcom: Inline the qscratch constants usb: dwc3: qcom: Flatten dwc3 structure - 1 - --- 2023-10-17 Bjorn Andersson New
[09/12] dt-bindings: usb: qcom,dwc3: Rename to "glue" usb: dwc3: qcom: Flatten dwc3 structure - 1 - --- 2023-10-17 Bjorn Andersson New
[10/12] dt-bindings: usb: qcom,dwc3: Introduce flattened qcom,dwc3 binding usb: dwc3: qcom: Flatten dwc3 structure - - - --- 2023-10-17 Bjorn Andersson New
[11/12] usb: dwc3: qcom: Flatten the Qualcomm dwc3 binding and implementation usb: dwc3: qcom: Flatten dwc3 structure - - - --- 2023-10-17 Bjorn Andersson New
[12/12] arm64: dts: qcom: sc8180x: flatten usb_sec node usb: dwc3: qcom: Flatten dwc3 structure - - - --- 2023-10-17 Bjorn Andersson New
[1/1] usb: dwc3: let role switch handle initial state [1/1] usb: dwc3: let role switch handle initial state - - - --- 2023-10-17 Alexander Stein New
[RFC,1/8] dt-bindings: usb: qcom,dwc3: Add bindings to enable runtime Enable runtime suspend resume for QCOM devices - - - --- 2023-10-17 Krishna Kurapati PSSNV New
[RFC,2/8] usb: dwc3: core: Register vendor hooks for dwc3-qcom Enable runtime suspend resume for QCOM devices - - - --- 2023-10-17 Krishna Kurapati PSSNV New
[RFC,3/8] usb: dwc3: qcom: Enable autosuspend for host mode Enable runtime suspend resume for QCOM devices - - - --- 2023-10-17 Krishna Kurapati PSSNV New
[RFC,5/8] arm64: dts: qcom: Flatten sm8450 usb device node Enable runtime suspend resume for QCOM devices - - - --- 2023-10-17 Krishna Kurapati PSSNV New
[RFC,6/8] arm: dts: qcom: Add pmic glink support for sm8450-qrd Enable runtime suspend resume for QCOM devices - 1 - --- 2023-10-17 Krishna Kurapati PSSNV New
[RFC,7/8] arm: dts: qcom: Enable runtime for SM8450 QRD Enable runtime suspend resume for QCOM devices - - - --- 2023-10-17 Krishna Kurapati PSSNV New
[RFC,8/8] usb: dwc3: core: Skip set_mode notification if cable is disconnected Enable runtime suspend resume for QCOM devices - - - --- 2023-10-17 Krishna Kurapati PSSNV New
USB4/Thunderbolt fix for v6.6-rc7 USB4/Thunderbolt fix for v6.6-rc7 - - - --- 2023-10-17 Mika Westerberg New
usb: core: Minor improvements to usb_hub_create_port_device usb: core: Minor improvements to usb_hub_create_port_device - - - --- 2023-10-17 Heiner Kallweit New
[v2] usb: typec: altmodes/displayport: verify compatible source/sink role combination [v2] usb: typec: altmodes/displayport: verify compatible source/sink role combination 1 1 - --- 2023-10-18 RD Babiera New
net: lan78xx: add an error code check in lan78xx_write_raw_eeprom net: lan78xx: add an error code check in lan78xx_write_raw_eeprom - - - --- 2023-10-19 Su Hui New
[v6,1/4] usb: gadget: uvc: prevent use of disabled endpoint usb: gadget: uvc: stability fixes on STREAMOFF. - 1 1 --- 2023-10-19 Avichal Rakesh New
[v6,2/4] usb: gadget: uvc: Allocate uvc_requests one at a time usb: gadget: uvc: stability fixes on STREAMOFF. - 1 1 --- 2023-10-19 Avichal Rakesh New
[v6,3/4] usb: gadget: uvc: move video disable logic to its own function usb: gadget: uvc: stability fixes on STREAMOFF. - - - --- 2023-10-19 Avichal Rakesh New
[v6,4/4] usb: gadget: uvc: Fix use-after-free for inflight usb_requests usb: gadget: uvc: stability fixes on STREAMOFF. - 1 1 --- 2023-10-19 Avichal Rakesh New
usb:gadget:uvc: Add super speed plus descriptors usb:gadget:uvc: Add super speed plus descriptors - - - --- 2023-10-19 Jayant Chowdhary New
ZDI-CAN-22273: New Vulnerability Report ZDI-CAN-22273: New Vulnerability Report - - - --- 2023-10-20 zdi-disclosures@trendmicro.com New
usb: core: Prevent infinite loops when usb_reset_device() unbinds/binds usb: core: Prevent infinite loops when usb_reset_device() unbinds/binds - - - --- 2023-10-20 Douglas Anderson New
usb.ids: update the USB Class codes usb.ids: update the USB Class codes - - - --- 2023-10-22 Greg KH New
usb: storage: add shutdown function for usb storage driver usb: storage: add shutdown function for usb storage driver - - - --- 2023-10-23 Li, Meng New
[RFC,1/2] kselftest: Add test to verify probe of devices from discoverable busses Add test to verify probe of devices from discoverable busses on DT platforms - - - --- 2023-10-24 Nícolas F. R. A. Prado New
[RFC,2/2] kselftest: devices: Add board file for google,spherion Add test to verify probe of devices from discoverable busses on DT platforms - - - --- 2023-10-24 Nícolas F. R. A. Prado New
[v5] usb: Reduce 'set_address' command timeout with a new quirk [v5] usb: Reduce 'set_address' command timeout with a new quirk - 1 - --- 2023-10-25 Hardik Gajjar New
[V3] usb: gadget: f_uac1: add adaptive sync support for capture [V3] usb: gadget: f_uac1: add adaptive sync support for capture - - - --- 2023-10-26 Charles Yi New
[v6] usb: Reduce the 'SET_ADDRESS' request timeout with a new quirk [v6] usb: Reduce the 'SET_ADDRESS' request timeout with a new quirk - 2 - --- 2023-10-26 Hardik Gajjar New
USB: serial: option: modify Fibocom to DELL custom modem FM101R-GL USB: serial: option: modify Fibocom to DELL custom modem FM101R-GL - - - --- 2023-10-26 Puliang Lu New
[v2] usb:gadget:uvc Do not use worker thread to pump usb requests [v2] usb:gadget:uvc Do not use worker thread to pump usb requests - - 1 --- 2023-10-26 Jayant Chowdhary New
[RFC,v2,2/2] samples: rust: Add USB sample bindings Untitled series #796973 - - - --- 2023-10-27 Martin Rodriguez Reboredo New
set 1.50 as the lower bcdDevice value for "Super Top"-device in drivers/usb/storage/unusual_cypress… set 1.50 as the lower bcdDevice value for "Super Top"-device in drivers/usb/storage/unusual_cypress… - - - --- 2023-10-27 LihaSika New
usb: storage: set 1.50 as the lower bcdDevice compatibility for older "Super Top"-device to work usb: storage: set 1.50 as the lower bcdDevice compatibility for older "Super Top"-device to work - - - --- 2023-10-27 LihaSika New
cdns3 uvc first ISO parkage lost problem cdns3 uvc first ISO parkage lost problem - - - --- 2023-10-27 Frank Li New
[v2] usb: dwc2: Use seq_buf instead of hand writing it [v2] usb: dwc2: Use seq_buf instead of hand writing it - - - --- 2023-10-28 Christophe JAILLET New
usb: gadget: Support transfers from device memory usb: gadget: Support transfers from device memory - - - --- 2023-10-31 Manan Aurora New
rpm: pm: enable PM_RPM_EXCEPTION config flag rpm: pm: enable PM_RPM_EXCEPTION config flag - - - --- 2023-10-31 Guan-Yu Lin New
[1/2] PCI: Move the `PCI_CLASS_SERIAL_USB_USB4` definition to common header [1/2] PCI: Move the `PCI_CLASS_SERIAL_USB_USB4` definition to common header 1 - - --- 2023-10-31 Mario Limonciello New
[2/2] PCI: Ignore PCIe ports used for tunneling in pcie_bandwidth_available() [1/2] PCI: Move the `PCI_CLASS_SERIAL_USB_USB4` definition to common header - - - --- 2023-10-31 Mario Limonciello New
[V2] usb: musb: Check requset->buf before use to avoid crash issue [V2] usb: musb: Check requset->buf before use to avoid crash issue - - - --- 2023-11-01 Xingxing Luo New
[RESEND,1/2] usb: host: xhci-plat: Add quirk-no-64-bit-support Add a quirk in xhci-plat for parent nodes to specify no 64 bit support - - - --- 2023-11-01 Naveen Kumar New
[RESEND,2/2] dt-bindings: usb: add no-64-bit-support property Add a quirk in xhci-plat for parent nodes to specify no 64 bit support - - - --- 2023-11-01 Naveen Kumar New
tty: hso: Fix potential null pointer dereference tty: hso: Fix potential null pointer dereference - - - --- 2023-11-01 Ren Mingshuai New
[v3] usb:gadget:uvc Do not use worker thread to queue isoc usb requests [v3] usb:gadget:uvc Do not use worker thread to queue isoc usb requests - - - --- 2023-11-02 Jayant Chowdhary New
usb: dwc3: Support EBC feature of DWC_usb31 usb: dwc3: Support EBC feature of DWC_usb31 - - - --- 2023-11-02 Manan Aurora New
[v1] USB: dwc3: only call usb_phy_set_suspend in suspend/resume [v1] USB: dwc3: only call usb_phy_set_suspend in suspend/resume - - - --- 2023-11-03 Francesco Dolcini New
[v2,1/9] drm/nouveau: Switch from pci_is_thunderbolt_attached() to dev_is_removable() Improvements to pcie_bandwidth_available() for eGPUs - - - --- 2023-11-03 Mario Limonciello New
[v2,2/9] drm/radeon: Switch from pci_is_thunderbolt_attached() to dev_is_removable() Improvements to pcie_bandwidth_available() for eGPUs - - - --- 2023-11-03 Mario Limonciello New
[v2,3/9] PCI: Drop pci_is_thunderbolt_attached() Improvements to pcie_bandwidth_available() for eGPUs - - - --- 2023-11-03 Mario Limonciello New
[v2,4/9] PCI: Move the `PCI_CLASS_SERIAL_USB_USB4` definition to common header Improvements to pcie_bandwidth_available() for eGPUs 1 - - --- 2023-11-03 Mario Limonciello New
[v2,5/9] PCI: pciehp: Move check for is_thunderbolt into a quirk Improvements to pcie_bandwidth_available() for eGPUs - - - --- 2023-11-03 Mario Limonciello New
[v2,6/9] PCI: Rename is_thunderbolt to is_tunneled Improvements to pcie_bandwidth_available() for eGPUs 1 - - --- 2023-11-03 Mario Limonciello New
[v2,7/9] PCI: ACPI: Detect PCIe root ports that are used for tunneling Improvements to pcie_bandwidth_available() for eGPUs - - - --- 2023-11-03 Mario Limonciello New
[v2,8/9] PCI: Exclude PCIe ports used for tunneling in pcie_bandwidth_available() Improvements to pcie_bandwidth_available() for eGPUs - - - --- 2023-11-03 Mario Limonciello New
[v2,9/9] PCI: Add a quirk to mark 0x8086 : 0x9a23 as supporting PCIe tunneling Improvements to pcie_bandwidth_available() for eGPUs - - - --- 2023-11-03 Mario Limonciello New
[RFC,v3,2/2] samples: rust: Add USB sample bindings Untitled series #798854 - - - --- 2023-11-04 Martin Rodriguez Reboredo New
[v6] usb-storage,uas: use host helper to generate driver info [v6] usb-storage,uas: use host helper to generate driver info - - - --- 2023-11-05 Milan Broz New
usb: dwc3: xilinx: improve error handling for PM APIs usb: dwc3: xilinx: improve error handling for PM APIs - - - --- 2023-11-08 Mehta, Piyush New
[15/22] arch: vdso: consolidate gettime prototypes -Wmissing-prototype warning fixes - 1 - --- 2023-11-08 Arnd Bergmann New
« 1 2 3 45 6 »