| Message ID | 20200205112228.25155-3-kai.heng.feng@canonical.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v2,1/3] xhci: Ensure link state is U3 after setting USB_SS_PORT_LS_U3 | expand |
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 6b6413073584..2fb7c1602280 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -371,6 +371,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x0b05, 0x17e0), .driver_info = USB_QUIRK_IGNORE_REMOTE_WAKEUP }, + /* Realtek hub in Dell WD19 (Type-C) */ + { USB_DEVICE(0x0bda, 0x0487), .driver_info = USB_QUIRK_NO_LPM }, + /* Action Semiconductor flash disk */ { USB_DEVICE(0x10d6, 0x2200), .driver_info = USB_QUIRK_STRING_FETCH_255 },
Realtek Hub (0bda:0x0487) used in Dell Dock WD19 sometimes drops off the bus when bringing underlying ports from U3 to U0. Disabling LPM on the hub during setting link state is not enough, so let's disable LPM completely for this hub. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+)