@@ -501,6 +501,22 @@ static void dwc3_qcom_select_utmi_clk(struct dwc3_qcom *qcom)
PIPE_UTMI_CLK_DIS);
}
+static int dwc3_qcom_request_irq(struct dwc3_qcom *qcom, int irq,
+ const char *name)
+{
+ int ret;
+
+ /* Keep wakeup interrupts disabled until suspend */
+ ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
+ qcom_dwc3_resume_irq,
+ IRQF_ONESHOT | IRQF_NO_AUTOEN,
+ name, qcom);
+ if (ret)
+ dev_err(qcom->dev, "failed to request irq %s: %d\n", name, ret);
+
+ return ret;
+}
+
static int dwc3_qcom_setup_irq(struct platform_device *pdev)
{
struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
@@ -509,54 +525,33 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
irq = platform_get_irq_byname_optional(pdev, "qusb2_phy");
if (irq > 0) {
- /* Keep wakeup interrupts disabled until suspend */
- ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
- qcom_dwc3_resume_irq,
- IRQF_ONESHOT | IRQF_NO_AUTOEN,
- "qcom_dwc3 QUSB2", qcom);
- if (ret) {
- dev_err(qcom->dev, "qusb2_phy_irq failed: %d\n", ret);
+ ret = dwc3_qcom_request_irq(qcom, irq, "qusb2_phy");
+ if (ret)
return ret;
- }
qcom->qusb2_phy_irq = irq;
}
irq = platform_get_irq_byname_optional(pdev, "dp_hs_phy_irq");
if (irq > 0) {
- ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
- qcom_dwc3_resume_irq,
- IRQF_ONESHOT | IRQF_NO_AUTOEN,
- "qcom_dwc3 DP_HS", qcom);
- if (ret) {
- dev_err(qcom->dev, "dp_hs_phy_irq failed: %d\n", ret);
+ ret = dwc3_qcom_request_irq(qcom, irq, "dp_hs_phy_irq");
+ if (ret)
return ret;
- }
qcom->dp_hs_phy_irq = irq;
}
irq = platform_get_irq_byname_optional(pdev, "dm_hs_phy_irq");
if (irq > 0) {
- ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
- qcom_dwc3_resume_irq,
- IRQF_ONESHOT | IRQF_NO_AUTOEN,
- "qcom_dwc3 DM_HS", qcom);
- if (ret) {
- dev_err(qcom->dev, "dm_hs_phy_irq failed: %d\n", ret);
+ ret = dwc3_qcom_request_irq(qcom, irq, "dm_hs_phy_irq");
+ if (ret)
return ret;
- }
qcom->dm_hs_phy_irq = irq;
}
irq = platform_get_irq_byname_optional(pdev, "ss_phy_irq");
if (irq > 0) {
- ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
- qcom_dwc3_resume_irq,
- IRQF_ONESHOT | IRQF_NO_AUTOEN,
- "qcom_dwc3 SS", qcom);
- if (ret) {
- dev_err(qcom->dev, "ss_phy_irq failed: %d\n", ret);
+ ret = dwc3_qcom_request_irq(qcom, irq, "ss_phy_irq");
+ if (ret)
return ret;
- }
qcom->ss_phy_irq = irq;
}
The logic for requesting interrupts is duplicated for each interrupt. In the upcoming patches that introduces support for multiport, it would be better to clean up the duplication before reading mulitport related interrupts. Refactor interrupt setup call by adding a new helper function for requesting the wakeup interrupts. To simplify implementation, make the display name same as the interrupt name expected in DT. Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> --- drivers/usb/dwc3/dwc3-qcom.c | 53 ++++++++++++++++-------------------- 1 file changed, 24 insertions(+), 29 deletions(-)