diff mbox series

[v16,8/9] usb: dwc3: qcom: Enable wakeup for applicable ports of multiport

Message ID 20240307062052.2319851-9-quic_kriskura@quicinc.com (mailing list archive)
State Superseded
Headers show
Series Add multiport support for DWC3 controllers | expand

Commit Message

Krishna Kurapati March 7, 2024, 6:20 a.m. UTC 
DWC3 Qcom wrapper currently supports only wakeup configuration
for single port controllers. Read speed of each port connected
to the controller and enable wakeup for each of them accordingly.

Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
---
 drivers/usb/dwc3/dwc3-qcom.c | 71 +++++++++++++++++++++---------------
 1 file changed, 41 insertions(+), 30 deletions(-)

Comments

Johan Hovold March 25, 2024, 12:50 p.m. UTC | #1 
On Thu, Mar 07, 2024 at 11:50:51AM +0530, Krishna Kurapati wrote:
> DWC3 Qcom wrapper currently supports only wakeup configuration
> for single port controllers. Read speed of each port connected
> to the controller and enable wakeup for each of them accordingly.
> 
> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>

Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index dcb3b3ded205..c0a6de50ec09 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -57,6 +57,7 @@  struct dwc3_qcom_port {
 	int			dp_hs_phy_irq;
 	int			dm_hs_phy_irq;
 	int			ss_phy_irq;
+	enum usb_device_speed	usb2_speed;
 };
 
 struct dwc3_qcom {
@@ -68,7 +69,6 @@  struct dwc3_qcom {
 	struct reset_control	*resets;
 	struct dwc3_qcom_port	ports[DWC3_MAX_PORTS];
 	u8			num_ports;
-	enum usb_device_speed	usb2_speed;
 
 	struct extcon_dev	*edev;
 	struct extcon_dev	*host_edev;
@@ -307,7 +307,7 @@  static bool dwc3_qcom_is_host(struct dwc3_qcom *qcom)
 	return dwc->xhci;
 }
 
-static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom)
+static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom, int port_index)
 {
 	struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
 	struct usb_device *udev;
@@ -318,14 +318,8 @@  static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom)
 	 */
 	hcd = platform_get_drvdata(dwc->xhci);
 
-	/*
-	 * It is possible to query the speed of all children of
-	 * USB2.0 root hub via usb_hub_for_each_child(). DWC3 code
-	 * currently supports only 1 port per controller. So
-	 * this is sufficient.
-	 */
 #ifdef CONFIG_USB
-	udev = usb_hub_find_child(hcd->self.root_hub, 1);
+	udev = usb_hub_find_child(hcd->self.root_hub, port_index + 1);
 #else
 	udev = NULL;
 #endif
@@ -356,26 +350,26 @@  static void dwc3_qcom_disable_wakeup_irq(int irq)
 	disable_irq_nosync(irq);
 }
 
-static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
+static void dwc3_qcom_disable_port_interrupts(struct dwc3_qcom_port *port)
 {
-	dwc3_qcom_disable_wakeup_irq(qcom->ports[0].qusb2_phy_irq);
+	dwc3_qcom_disable_wakeup_irq(port->qusb2_phy_irq);
 
-	if (qcom->usb2_speed == USB_SPEED_LOW) {
-		dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq);
-	} else if ((qcom->usb2_speed == USB_SPEED_HIGH) ||
-			(qcom->usb2_speed == USB_SPEED_FULL)) {
-		dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq);
+	if (port->usb2_speed == USB_SPEED_LOW) {
+		dwc3_qcom_disable_wakeup_irq(port->dm_hs_phy_irq);
+	} else if ((port->usb2_speed == USB_SPEED_HIGH) ||
+			(port->usb2_speed == USB_SPEED_FULL)) {
+		dwc3_qcom_disable_wakeup_irq(port->dp_hs_phy_irq);
 	} else {
-		dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq);
-		dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq);
+		dwc3_qcom_disable_wakeup_irq(port->dp_hs_phy_irq);
+		dwc3_qcom_disable_wakeup_irq(port->dm_hs_phy_irq);
 	}
 
-	dwc3_qcom_disable_wakeup_irq(qcom->ports[0].ss_phy_irq);
+	dwc3_qcom_disable_wakeup_irq(port->ss_phy_irq);
 }
 
-static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
+static void dwc3_qcom_enable_port_interrupts(struct dwc3_qcom_port *port)
 {
-	dwc3_qcom_enable_wakeup_irq(qcom->ports[0].qusb2_phy_irq, 0);
+	dwc3_qcom_enable_wakeup_irq(port->qusb2_phy_irq, 0);
 
 	/*
 	 * Configure DP/DM line interrupts based on the USB2 device attached to
@@ -386,21 +380,37 @@  static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
 	 * DP and DM lines as rising edge to detect HS/HS/LS device connect scenario.
 	 */
 
-	if (qcom->usb2_speed == USB_SPEED_LOW) {
-		dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq,
+	if (port->usb2_speed == USB_SPEED_LOW) {
+		dwc3_qcom_enable_wakeup_irq(port->dm_hs_phy_irq,
 					    IRQ_TYPE_EDGE_FALLING);
-	} else if ((qcom->usb2_speed == USB_SPEED_HIGH) ||
-			(qcom->usb2_speed == USB_SPEED_FULL)) {
-		dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq,
+	} else if ((port->usb2_speed == USB_SPEED_HIGH) ||
+			(port->usb2_speed == USB_SPEED_FULL)) {
+		dwc3_qcom_enable_wakeup_irq(port->dp_hs_phy_irq,
 					    IRQ_TYPE_EDGE_FALLING);
 	} else {
-		dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq,
+		dwc3_qcom_enable_wakeup_irq(port->dp_hs_phy_irq,
 					    IRQ_TYPE_EDGE_RISING);
-		dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq,
+		dwc3_qcom_enable_wakeup_irq(port->dm_hs_phy_irq,
 					    IRQ_TYPE_EDGE_RISING);
 	}
 
-	dwc3_qcom_enable_wakeup_irq(qcom->ports[0].ss_phy_irq, 0);
+	dwc3_qcom_enable_wakeup_irq(port->ss_phy_irq, 0);
+}
+
+static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
+{
+	int i;
+
+	for (i = 0; i < qcom->num_ports; i++)
+		dwc3_qcom_disable_port_interrupts(&qcom->ports[i]);
+}
+
+static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
+{
+	int i;
+
+	for (i = 0; i < qcom->num_ports; i++)
+		dwc3_qcom_enable_port_interrupts(&qcom->ports[i]);
 }
 
 static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
@@ -427,7 +437,8 @@  static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
 	 * freezable workqueue.
 	 */
 	if (dwc3_qcom_is_host(qcom) && wakeup) {
-		qcom->usb2_speed = dwc3_qcom_read_usb2_speed(qcom);
+		for (i = 0; i < qcom->num_ports; i++)
+			qcom->ports[i].usb2_speed = dwc3_qcom_read_usb2_speed(qcom, i);
 		dwc3_qcom_enable_interrupts(qcom);
 	}