diff mbox series

[v2,12/12] usb: dwc3: gadget: Set speed only up to the max supported

Message ID 8636b860422de412a954cd7b8a11ef1d73a14538.1595468673.git.thinhn@synopsys.com (mailing list archive)
State Superseded
Headers show
Series usb: Handle different sublink speeds | expand

Commit Message

Thinh Nguyen July 23, 2020, 2:13 a.m. UTC
The setting of device speed should be limited by the device's
maximum_speed. This patch adds a check and prevent the driver from
attempting to configure higher than the maximum_speed.

Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
---
 Changes in v2:
 - None

 drivers/usb/dwc3/gadget.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 2bc29d74e75a..9094690f8258 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2254,6 +2254,7 @@  static void dwc3_gadget_set_speed(struct usb_gadget *g,
 				  enum usb_device_speed speed)
 {
 	struct dwc3		*dwc = gadget_to_dwc(g);
+	enum usb_device_speed	selected_speed = speed;
 	unsigned long		flags;
 	u32			reg;
 
@@ -2278,7 +2279,10 @@  static void dwc3_gadget_set_speed(struct usb_gadget *g,
 	    !dwc->dis_metastability_quirk) {
 		reg |= DWC3_DCFG_SUPERSPEED;
 	} else {
-		switch (speed) {
+		if (speed > dwc->maximum_speed)
+			selected_speed = dwc->maximum_speed;
+
+		switch (selected_speed) {
 		case USB_SPEED_LOW:
 			reg |= DWC3_DCFG_LOWSPEED;
 			break;
@@ -2298,7 +2302,8 @@  static void dwc3_gadget_set_speed(struct usb_gadget *g,
 				reg |= DWC3_DCFG_SUPERSPEED_PLUS;
 			break;
 		default:
-			dev_err(dwc->dev, "invalid speed (%d)\n", speed);
+			dev_err(dwc->dev, "invalid speed (%d)\n",
+				selected_speed);
 
 			if (DWC3_IP_IS(DWC3))
 				reg |= DWC3_DCFG_SUPERSPEED;
@@ -2307,7 +2312,7 @@  static void dwc3_gadget_set_speed(struct usb_gadget *g,
 		}
 	}
 
-	if (DWC3_IP_IS(DWC32) && speed < USB_SPEED_SUPER_PLUS)
+	if (DWC3_IP_IS(DWC32) && selected_speed < USB_SPEED_SUPER_PLUS)
 		reg &= ~DWC3_DCFG_NUMLANES(~0);
 
 	dwc3_writel(dwc->regs, DWC3_DCFG, reg);