[0/3] rsi: fix startup and P2P mode

Message

Fuzzey, Martin Aug. 6, 2021, 10:23 a.m. UTC

This series fixes an occasional startup failure when BT
coexistence is enabled and makes P2P mode work
(the two are unrelated but sending as a series since the same files
are modified).

Tested on RS9116 in P2P client mode against an Android phone (S8, Android 9)

For an unknown reason GO mode does not work against the phone but it
does work against a second RS9116 device.
In this case Android does not send a response to the 3rd WPA handshake
packet. It is difficult to debug this without the phone wpa_supplicant
logs which I don't have.

Regression tested OK for STA and AP modes.


Martin Fuzzey (3):
  rsi: fix occasional initialisation failure with BT coex
  rsi: fix key enabled check causing unwanted encryption for vap_id > 0
  rsi: fix rate mask set leading to P2P failure

 drivers/net/wireless/rsi/rsi_91x_core.c     |  2 +
 drivers/net/wireless/rsi/rsi_91x_hal.c      | 10 ++--
 drivers/net/wireless/rsi/rsi_91x_mac80211.c | 74 +++++++++--------------------
 drivers/net/wireless/rsi/rsi_91x_main.c     | 16 +++++--
 drivers/net/wireless/rsi/rsi_91x_mgmt.c     | 24 +++++++---
 drivers/net/wireless/rsi/rsi_main.h         | 16 +++++--
 6 files changed, 72 insertions(+), 70 deletions(-)

--
1.9.1