[v7,0/5] mt76: channel switch support for USB devices

Message

Markus Theil Nov. 20, 2019, 10:28 p.m. UTC

This patch series adds channel switch support for mt76 usb interfaces.
When testing, I noticed that between 5 or 7 consecutive beacons had the
identical channel switch count set. After some debugging I found out,
that beacon copying over usb took far too long (up to 700ms for one call
of mt76x02u_pre_tbtt_work).

Therefore the first four patches speed up beacon copying and the last
patch enables channel switch support also for usb interfaces.

v7 (thanks to Stanislaw):
* fix mbss beacon settings
* fix compilation with latest upstream

v6:
* use min_t in mt76u_copy
* use round_up in mt76u_copy
* use additional copy for mmio beacon set again

v5 (thanks to Stanislaw):
* ommit empty mt76x2u_channel_switch_beacon
* copy txwi into beacon skb

v4:
* use multiple of 4 len for usb copy again

v3:
* fixed checkpatch errors

v2 (thanks for the comments Lorenzo):
* correctly track beacon data mask
* clean-ups
* make channel switch fn static (reported by kbuild test robot)

Markus Theil (5):
  mt76: mt76x02: ommit beacon slot clearing
  mt76: mt76x02: split beaconing
  mt76: mt76x02: remove a copy call for usb speedup
  mt76: speed up usb bulk copy
  mt76: mt76x02: add channel switch support for usb interfaces

 drivers/net/wireless/mediatek/mt76/mt76.h     |  2 +-
 .../wireless/mediatek/mt76/mt76x02_beacon.c   | 73 +++++++------------
 .../net/wireless/mediatek/mt76/mt76x02_mac.h  |  1 +
 .../net/wireless/mediatek/mt76/mt76x02_mmio.c |  5 ++
 .../wireless/mediatek/mt76/mt76x02_usb_core.c | 12 +++
 .../net/wireless/mediatek/mt76/mt76x02_util.c |  2 +-
 drivers/net/wireless/mediatek/mt76/usb.c      | 24 ++++--
 7 files changed, 66 insertions(+), 53 deletions(-)