mbox series

[v6,0/3] Add support to configure beacon tx mode

Message ID 20220325055949.3035053-1-quic_mkenna@quicinc.com (mailing list archive)
Headers show
Series Add support to configure beacon tx mode | expand

Message

Maharaja Kennadyrajan March 25, 2022, 5:59 a.m. UTC 
Add support to configure the beacon tx mode as STAGGERED
or BURST mode via hostapd configuration during the AP
bring-up or via wpa_suppplicant configuration during MESH
bring-up.

Beacons can be sent out in burst(continuously in a single shot
one after another) or staggered (equally spread out over beacon
interval) mode.

V6: Addressed Jeff's comment on v5.

V5: Addressed Johannes's and Felix's comment on v4.

V4: Rebased on latest ath.git TOT.

V3: Addressed Johnson's comment on v2 patch.

V2: Addressed Johannes's comment on v1 patch.

Maharaja Kennadyrajan (3):
  nl80211: Add support for beacon tx mode
  mac80211: Add support for beacon tx mode
  ath11k: Add support for beacon tx mode

 drivers/net/wireless/ath/ath11k/mac.c | 10 +++++++---
 include/net/cfg80211.h                |  4 ++++
 include/net/mac80211.h                |  2 ++
 include/uapi/linux/nl80211.h          | 21 +++++++++++++++++++++
 net/mac80211/cfg.c                    |  2 ++
 net/wireless/nl80211.c                | 11 +++++++++++
 6 files changed, 47 insertions(+), 3 deletions(-)