[v4,0/4] ath11k: factory test mode support

Message

Raj Kumar Bhagat May 17, 2023, 1:59 p.m. UTC

Device is booted in factory test mode to calibrate the board.
The commands are sent from a userspace application, which is
sent to firmware using wmi commands. Firmware will send the
response back to the application which stores the calibration
data in caldata.bin file. This file will be loaded when the
device boots up normally next time.

Govindaraj Saminathan (3):
  wifi: ath11k: remove unused function ath11k_tm_event_wmi
  wifi: ath11k: optimize ath11k_tm_cmd_get_version
  wifi: ath11k: factory test mode support

Sowmiya Sree Elavalagan (1):
  wifi: ath11k: Allow ath11k to boot without caldata in ftm mode

---
v4:
- used pending branch commit as baseline for v4.

v3:
- added Tested-on tag in patch 1/4 and 2/4.

v2:
- added separate patch for removal of ath11k_tm_event_wmi()
- added separate patch for changes in ath11k_tm_cmd_get_version()
- removed unused cmd and updated documentation for enum ath11k_tm_cmd
- changed warning print to debug print
---

 drivers/net/wireless/ath/ath11k/ahb.c        |   3 +-
 drivers/net/wireless/ath/ath11k/core.c       |  21 +-
 drivers/net/wireless/ath/ath11k/core.h       |  16 +-
 drivers/net/wireless/ath/ath11k/debug.h      |   1 +
 drivers/net/wireless/ath/ath11k/mac.c        |  11 +-
 drivers/net/wireless/ath/ath11k/pci.c        |   3 +-
 drivers/net/wireless/ath/ath11k/qmi.c        |  10 +-
 drivers/net/wireless/ath/ath11k/testmode.c   | 363 ++++++++++++++++---
 drivers/net/wireless/ath/ath11k/testmode.h   |   7 +-
 drivers/net/wireless/ath/ath11k/testmode_i.h |  18 +-
 drivers/net/wireless/ath/ath11k/wmi.c        |  11 +-
 drivers/net/wireless/ath/ath11k/wmi.h        |  22 ++
 drivers/net/wireless/ath/ath11k/wow.c        |   3 +-
 13 files changed, 422 insertions(+), 67 deletions(-)


base-commit: 610b78b97bad8f3e77c27a15e9a03cbbb4109697