@@ -4,6 +4,7 @@ config B43
select BCMA if B43_BCMA
select SSB if B43_SSB
select FW_LOADER
+ select CORDIC
---help---
b43 is a driver for the Broadcom 43xx series wireless devices.
@@ -604,50 +604,3 @@ void b43_phy_force_clock(struct b43_wldev *dev, bool force)
#endif
}
}
-
-/* http://bcm-v4.sipsolutions.net/802.11/PHY/Cordic */
-struct b43_c32 b43_cordic(int theta)
-{
- static const u32 arctg[] = {
- 2949120, 1740967, 919879, 466945, 234379, 117304,
- 58666, 29335, 14668, 7334, 3667, 1833,
- 917, 458, 229, 115, 57, 29,
- };
- u8 i;
- s32 tmp;
- s8 signx = 1;
- s32 angle = 0;
- struct b43_c32 ret = { .i = 39797, .q = 0, };
-
- while (theta > (180 << 16))
- theta -= (360 << 16);
- while (theta < -(180 << 16))
- theta += (360 << 16);
-
- if (theta > (90 << 16)) {
- theta -= (180 << 16);
- signx = -1;
- } else if (theta < -(90 << 16)) {
- theta += (180 << 16);
- signx = -1;
- }
-
- for (i = 0; i <= 17; i++) {
- if (theta > angle) {
- tmp = ret.i - (ret.q >> i);
- ret.q += ret.i >> i;
- ret.i = tmp;
- angle += arctg[i];
- } else {
- tmp = ret.i + (ret.q >> i);
- ret.q -= ret.i >> i;
- ret.i = tmp;
- angle -= arctg[i];
- }
- }
-
- ret.i *= signx;
- ret.q *= signx;
-
- return ret;
-}
@@ -7,13 +7,6 @@
struct b43_wldev;
-/* Complex number using 2 32-bit signed integers */
-struct b43_c32 { s32 i, q; };
-
-#define CORDIC_CONVERT(value) (((value) >= 0) ? \
- ((((value) >> 15) + 1) >> 1) : \
- -((((-(value)) >> 15) + 1) >> 1))
-
/* PHY register routing bits */
#define B43_PHYROUTE 0x0C00 /* PHY register routing bits mask */
#define B43_PHYROUTE_BASE 0x0000 /* Base registers */
@@ -450,6 +443,4 @@ bool b43_is_40mhz(struct b43_wldev *dev);
void b43_phy_force_clock(struct b43_wldev *dev, bool force);
-struct b43_c32 b43_cordic(int theta);
-
#endif /* LINUX_B43_PHY_COMMON_H_ */
@@ -23,6 +23,7 @@
*/
+#include <linux/cordic.h>
#include <linux/slab.h>
#include "b43.h"
@@ -1780,9 +1781,9 @@ static void lpphy_start_tx_tone(struct b43_wldev *dev, s32 freq, u16 max)
{
struct b43_phy_lp *lpphy = dev->phy.lp;
u16 buf[64];
- int i, samples = 0, angle = 0;
+ int i, samples = 0, theta = 0;
int rotation = (((36 * freq) / 20) << 16) / 100;
- struct b43_c32 sample;
+ struct cordic_iq sample;
lpphy->tx_tone_freq = freq;
@@ -1798,10 +1799,10 @@ static void lpphy_start_tx_tone(struct b43_wldev *dev, s32 freq, u16 max)
}
for (i = 0; i < samples; i++) {
- sample = b43_cordic(angle);
- angle += rotation;
- buf[i] = CORDIC_CONVERT((sample.i * max) & 0xFF) << 8;
- buf[i] |= CORDIC_CONVERT((sample.q * max) & 0xFF);
+ sample = cordic_calc_iq(CORDIC_FIXED(theta));
+ theta += rotation;
+ buf[i] = CORDIC_FLOAT((sample.i * max) & 0xFF) << 8;
+ buf[i] |= CORDIC_FLOAT((sample.q * max) & 0xFF);
}
b43_lptab_write_bulk(dev, B43_LPTAB16(5, 0), samples, buf);
@@ -23,6 +23,7 @@
*/
+#include <linux/cordic.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/types.h>
@@ -1513,7 +1514,7 @@ static void b43_radio_init2055(struct b43_wldev *dev)
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/LoadSampleTable */
static int b43_nphy_load_samples(struct b43_wldev *dev,
- struct b43_c32 *samples, u16 len) {
+ struct cordic_iq *samples, u16 len) {
struct b43_phy_n *nphy = dev->phy.n;
u16 i;
u32 *data;
@@ -1544,7 +1545,7 @@ static u16 b43_nphy_gen_load_samples(struct b43_wldev *dev, u32 freq, u16 max,
{
int i;
u16 bw, len, rot, angle;
- struct b43_c32 *samples;
+ struct cordic_iq *samples;
bw = b43_is_40mhz(dev) ? 40 : 20;
len = bw << 3;
@@ -1561,7 +1562,7 @@ static u16 b43_nphy_gen_load_samples(struct b43_wldev *dev, u32 freq, u16 max,
len = bw << 1;
}
- samples = kcalloc(len, sizeof(struct b43_c32), GFP_KERNEL);
+ samples = kcalloc(len, sizeof(struct cordic_iq), GFP_KERNEL);
if (!samples) {
b43err(dev->wl, "allocation for samples generation failed\n");
return 0;
@@ -1570,10 +1571,10 @@ static u16 b43_nphy_gen_load_samples(struct b43_wldev *dev, u32 freq, u16 max,
angle = 0;
for (i = 0; i < len; i++) {
- samples[i] = b43_cordic(angle);
+ samples[i] = cordic_calc_iq(CORDIC_FIXED(angle));
angle += rot;
- samples[i].q = CORDIC_CONVERT(samples[i].q * max);
- samples[i].i = CORDIC_CONVERT(samples[i].i * max);
+ samples[i].q = CORDIC_FLOAT(samples[i].q * max);
+ samples[i].i = CORDIC_FLOAT(samples[i].i * max);
}
i = b43_nphy_load_samples(dev, samples, len);