@@ -110,7 +110,7 @@ static struct iwl_lib_ops iwl1000_lib = {
.send_tx_power = iwl5000_send_tx_power,
.update_chain_flags = iwl_update_chain_flags,
.apm_ops = {
- .init = iwl5000_apm_init,
+ .init = iwl_apm_init,
.stop = iwl_apm_stop,
.config = iwl1000_nic_config,
.set_pwr_src = iwl_set_pwr_src,
@@ -163,7 +163,9 @@ struct iwl_cfg iwl1000_bgn_cfg = {
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_A,
.valid_rx_ant = ANT_AB,
- .need_pll_cfg = true,
+ .pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
+ .set_l0s = false,
+ .use_bsm = false,
.max_ll_items = OTP_MAX_LL_ITEMS_1000,
.shadow_ram_support = false,
.ht_greenfield_support = true,
@@ -186,7 +188,9 @@ struct iwl_cfg iwl1000_bg_cfg = {
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_A,
.valid_rx_ant = ANT_AB,
- .need_pll_cfg = true,
+ .pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
+ .set_l0s = false,
+ .use_bsm = false,
.max_ll_items = OTP_MAX_LL_ITEMS_1000,
.shadow_ram_support = false,
.ht_greenfield_support = true,
@@ -1013,55 +1013,15 @@ static int iwl3945_txq_ctx_reset(struct iwl_priv *priv)
return rc;
}
+
/*
- * Start up NIC's basic functionality after it has been reset
- * (e.g. after platform boot, or shutdown via iwl3945_apm_stop())
+ * Start up 3945's basic functionality after it has been reset
+ * (e.g. after platform boot, or shutdown via iwl_apm_stop())
* NOTE: This does not load uCode nor start the embedded processor
*/
static int iwl3945_apm_init(struct iwl_priv *priv)
{
- int ret;
-
- /* Configure chip clock phase-lock-loop */
- iwl_set_bit(priv, CSR_ANA_PLL_CFG, CSR39_ANA_PLL_CFG_VAL);
-
- /*
- * Disable L0S exit timer (platform NMI Work/Around)
- * (does this do anything on 3945, or just 4965 and beyond?)
- */
- iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
- CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
-
- /* Disable L0s without affecting L1; don't wait for ICH (L0s bug W/A) */
- iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
- CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
-
- /* Set FH wait threshold to maximum (HW error during stress W/A) */
- iwl_set_bit(priv, CSR_DBG_HPET_MEM_REG, CSR_DBG_HPET_MEM_REG_VAL);
-
- /*
- * Set "initialization complete" bit to move adapter from
- * D0U* --> D0A* (powered-up active) state.
- */
- iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
-
- /*
- * Wait for clock stabilization; once stabilized, access to
- * device-internal resources is supported, e.g. iwl_write_prph()
- * and accesses to uCode SRAM.
- */
- ret = iwl_poll_bit(priv, CSR_GP_CNTRL,
- CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
- CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
- if (ret < 0) {
- IWL_DEBUG_INFO(priv, "Failed to init the card\n");
- goto out;
- }
-
- /* Enable DMA and BSM clocks, wait for them to stabilize */
- iwl_write_prph(priv, APMG_CLK_CTRL_REG, APMG_CLK_VAL_DMA_CLK_RQT |
- APMG_CLK_VAL_BSM_CLK_RQT);
- udelay(20);
+ int ret = iwl_apm_init(priv);
/* Clear APMG (NIC's internal power management) interrupts */
iwl_write_prph(priv, APMG_RTC_INT_MSK_REG, 0x0);
@@ -1072,11 +1032,6 @@ static int iwl3945_apm_init(struct iwl_priv *priv)
udelay(5);
iwl_clear_bits_prph(priv, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ);
- /* Disable L1-Active */
- iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
- APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
-
-out:
return ret;
}
@@ -2876,6 +2831,9 @@ static struct iwl_cfg iwl3945_bg_cfg = {
.ops = &iwl3945_ops,
.num_of_queues = IWL39_NUM_QUEUES,
.mod_params = &iwl3945_mod_params,
+ .pll_cfg_val = CSR39_ANA_PLL_CFG_VAL,
+ .set_l0s = false,
+ .use_bsm = true,
.use_isr_legacy = true,
.ht_greenfield_support = false,
.led_compensation = 64,
@@ -317,64 +317,13 @@ static void iwl4965_txq_set_sched(struct iwl_priv *priv, u32 mask)
iwl_write_prph(priv, IWL49_SCD_TXFACT, mask);
}
-static int iwl4965_apm_init(struct iwl_priv *priv)
-{
- int ret = 0;
-
- iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
- CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
-
- /* disable L0s without affecting L1 :don't wait for ICH L0s bug W/A) */
- iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
- CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
-
- /* set "initialization complete" bit to move adapter
- * D0U* --> D0A* state */
- iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
-
- /* wait for clock stabilization */
- ret = iwl_poll_bit(priv, CSR_GP_CNTRL,
- CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
- CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
- if (ret < 0) {
- IWL_DEBUG_INFO(priv, "Failed to init the card\n");
- goto out;
- }
-
- /* enable DMA */
- iwl_write_prph(priv, APMG_CLK_CTRL_REG, APMG_CLK_VAL_DMA_CLK_RQT |
- APMG_CLK_VAL_BSM_CLK_RQT);
-
- udelay(20);
-
- /* disable L1-Active */
- iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
- APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
-
-out:
- return ret;
-}
-
-
static void iwl4965_nic_config(struct iwl_priv *priv)
{
unsigned long flags;
u16 radio_cfg;
- u16 lctl;
spin_lock_irqsave(&priv->lock, flags);
- lctl = iwl_pcie_link_ctl(priv);
-
- /* HW bug W/A - negligible power consumption */
- /* L1-ASPM is enabled by BIOS */
- if ((lctl & PCI_CFG_LINK_CTRL_VAL_L1_EN) == PCI_CFG_LINK_CTRL_VAL_L1_EN)
- /* L1-ASPM enabled: disable L0S */
- iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
- else
- /* L1-ASPM disabled: enable L0S */
- iwl_clear_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
-
radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
/* write radio config values to register */
@@ -2223,7 +2172,7 @@ static struct iwl_lib_ops iwl4965_lib = {
.dump_nic_event_log = iwl_dump_nic_event_log,
.dump_nic_error_log = iwl_dump_nic_error_log,
.apm_ops = {
- .init = iwl4965_apm_init,
+ .init = iwl_apm_init,
.stop = iwl_apm_stop,
.config = iwl4965_nic_config,
.set_pwr_src = iwl_set_pwr_src,
@@ -2276,6 +2225,9 @@ struct iwl_cfg iwl4965_agn_cfg = {
.num_of_queues = IWL49_NUM_QUEUES,
.num_of_ampdu_queues = IWL49_NUM_AMPDU_QUEUES,
.mod_params = &iwl4965_mod_params,
+ .pll_cfg_val = 0,
+ .set_l0s = true,
+ .use_bsm = true,
.use_isr_legacy = true,
.ht_greenfield_support = false,
.broken_powersave = true,
@@ -72,72 +72,14 @@ static const u16 iwl5000_default_queue_to_tx_fifo[] = {
IWL_TX_FIFO_HCCA_2
};
-int iwl5000_apm_init(struct iwl_priv *priv)
-{
- int ret = 0;
-
- iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
- CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
-
- /* disable L0s without affecting L1 :don't wait for ICH L0s bug W/A) */
- iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
- CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
-
- /* Set FH wait threshold to maximum (HW error during stress W/A) */
- iwl_set_bit(priv, CSR_DBG_HPET_MEM_REG, CSR_DBG_HPET_MEM_REG_VAL);
-
- /* enable HAP INTA to move device L1a -> L0s */
- iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
- CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A);
-
- if (priv->cfg->need_pll_cfg)
- iwl_set_bit(priv, CSR_ANA_PLL_CFG, CSR50_ANA_PLL_CFG_VAL);
-
- /* set "initialization complete" bit to move adapter
- * D0U* --> D0A* state */
- iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
-
- /* wait for clock stabilization */
- ret = iwl_poll_bit(priv, CSR_GP_CNTRL,
- CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
- CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
- if (ret < 0) {
- IWL_DEBUG_INFO(priv, "Failed to init the card\n");
- return ret;
- }
-
- /* enable DMA */
- iwl_write_prph(priv, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT);
-
- udelay(20);
-
- /* disable L1-Active */
- iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
- APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
-
- return ret;
-}
-
/* NIC configuration for 5000 series */
void iwl5000_nic_config(struct iwl_priv *priv)
{
unsigned long flags;
u16 radio_cfg;
- u16 lctl;
spin_lock_irqsave(&priv->lock, flags);
- lctl = iwl_pcie_link_ctl(priv);
-
- /* HW bug W/A */
- /* L1-ASPM is enabled by BIOS */
- if ((lctl & PCI_CFG_LINK_CTRL_VAL_L1_EN) == PCI_CFG_LINK_CTRL_VAL_L1_EN)
- /* L1-APSM enabled: disable L0S */
- iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
- else
- /* L1-ASPM disabled: enable L0S */
- iwl_clear_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
-
radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
/* write radio config values to register */
@@ -1488,7 +1430,7 @@ struct iwl_lib_ops iwl5000_lib = {
.send_tx_power = iwl5000_send_tx_power,
.update_chain_flags = iwl_update_chain_flags,
.apm_ops = {
- .init = iwl5000_apm_init,
+ .init = iwl_apm_init,
.stop = iwl_apm_stop,
.config = iwl5000_nic_config,
.set_pwr_src = iwl_set_pwr_src,
@@ -1539,7 +1481,7 @@ static struct iwl_lib_ops iwl5150_lib = {
.send_tx_power = iwl5000_send_tx_power,
.update_chain_flags = iwl_update_chain_flags,
.apm_ops = {
- .init = iwl5000_apm_init,
+ .init = iwl_apm_init,
.stop = iwl_apm_stop,
.config = iwl5000_nic_config,
.set_pwr_src = iwl_set_pwr_src,
@@ -1607,7 +1549,9 @@ struct iwl_cfg iwl5300_agn_cfg = {
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_ABC,
.valid_rx_ant = ANT_ABC,
- .need_pll_cfg = true,
+ .pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
+ .set_l0s = true,
+ .use_bsm = false,
.ht_greenfield_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
@@ -1628,7 +1572,9 @@ struct iwl_cfg iwl5100_bg_cfg = {
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_B,
.valid_rx_ant = ANT_AB,
- .need_pll_cfg = true,
+ .pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
+ .set_l0s = true,
+ .use_bsm = false,
.ht_greenfield_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
@@ -1649,7 +1595,9 @@ struct iwl_cfg iwl5100_abg_cfg = {
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_B,
.valid_rx_ant = ANT_AB,
- .need_pll_cfg = true,
+ .pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
+ .set_l0s = true,
+ .use_bsm = false,
.ht_greenfield_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
@@ -1670,7 +1618,9 @@ struct iwl_cfg iwl5100_agn_cfg = {
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_B,
.valid_rx_ant = ANT_AB,
- .need_pll_cfg = true,
+ .pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
+ .set_l0s = true,
+ .use_bsm = false,
.ht_greenfield_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
@@ -1691,7 +1641,9 @@ struct iwl_cfg iwl5350_agn_cfg = {
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_ABC,
.valid_rx_ant = ANT_ABC,
- .need_pll_cfg = true,
+ .pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
+ .set_l0s = true,
+ .use_bsm = false,
.ht_greenfield_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
@@ -1712,7 +1664,9 @@ struct iwl_cfg iwl5150_agn_cfg = {
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_A,
.valid_rx_ant = ANT_AB,
- .need_pll_cfg = true,
+ .pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
+ .set_l0s = true,
+ .use_bsm = false,
.ht_greenfield_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
@@ -193,7 +193,7 @@ static struct iwl_lib_ops iwl6000_lib = {
.send_tx_power = iwl5000_send_tx_power,
.update_chain_flags = iwl_update_chain_flags,
.apm_ops = {
- .init = iwl5000_apm_init,
+ .init = iwl_apm_init,
.stop = iwl_apm_stop,
.config = iwl6000_nic_config,
.set_pwr_src = iwl_set_pwr_src,
@@ -266,7 +266,9 @@ struct iwl_cfg iwl6000h_2agn_cfg = {
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_AB,
- .need_pll_cfg = false,
+ .pll_cfg_val = 0,
+ .set_l0s = false,
+ .use_bsm = false,
.pa_type = IWL_PA_HYBRID,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
@@ -292,7 +294,9 @@ struct iwl_cfg iwl6000h_2abg_cfg = {
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_AB,
- .need_pll_cfg = false,
+ .pll_cfg_val = 0,
+ .set_l0s = false,
+ .use_bsm = false,
.pa_type = IWL_PA_HYBRID,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
@@ -317,7 +321,9 @@ struct iwl_cfg iwl6000h_2bg_cfg = {
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_AB,
- .need_pll_cfg = false,
+ .pll_cfg_val = 0,
+ .set_l0s = false,
+ .use_bsm = false,
.pa_type = IWL_PA_HYBRID,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
@@ -345,7 +351,9 @@ struct iwl_cfg iwl6000i_2agn_cfg = {
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_BC,
.valid_rx_ant = ANT_BC,
- .need_pll_cfg = false,
+ .pll_cfg_val = 0,
+ .set_l0s = false,
+ .use_bsm = false,
.pa_type = IWL_PA_INTERNAL,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
@@ -371,7 +379,9 @@ struct iwl_cfg iwl6000i_2abg_cfg = {
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_BC,
.valid_rx_ant = ANT_BC,
- .need_pll_cfg = false,
+ .pll_cfg_val = 0,
+ .set_l0s = false,
+ .use_bsm = false,
.pa_type = IWL_PA_INTERNAL,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
@@ -396,7 +406,9 @@ struct iwl_cfg iwl6000i_2bg_cfg = {
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_BC,
.valid_rx_ant = ANT_BC,
- .need_pll_cfg = false,
+ .pll_cfg_val = 0,
+ .set_l0s = false,
+ .use_bsm = false,
.pa_type = IWL_PA_INTERNAL,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
@@ -421,7 +433,9 @@ struct iwl_cfg iwl6050_2agn_cfg = {
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_AB,
- .need_pll_cfg = false,
+ .pll_cfg_val = 0,
+ .set_l0s = false,
+ .use_bsm = false,
.pa_type = IWL_PA_SYSTEM,
.max_ll_items = OTP_MAX_LL_ITEMS_6x50,
.shadow_ram_support = true,
@@ -447,7 +461,9 @@ struct iwl_cfg iwl6050_2abg_cfg = {
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_AB,
- .need_pll_cfg = false,
+ .pll_cfg_val = 0,
+ .set_l0s = false,
+ .use_bsm = false,
.pa_type = IWL_PA_SYSTEM,
.max_ll_items = OTP_MAX_LL_ITEMS_6x50,
.shadow_ram_support = true,
@@ -472,7 +488,9 @@ struct iwl_cfg iwl6000_3agn_cfg = {
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_ABC,
.valid_rx_ant = ANT_ABC,
- .need_pll_cfg = false,
+ .pll_cfg_val = 0,
+ .set_l0s = false,
+ .use_bsm = false,
.pa_type = IWL_PA_SYSTEM,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
@@ -498,7 +516,9 @@ struct iwl_cfg iwl6050_3agn_cfg = {
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_ABC,
.valid_rx_ant = ANT_ABC,
- .need_pll_cfg = false,
+ .pll_cfg_val = 0,
+ .set_l0s = false,
+ .use_bsm = false,
.pa_type = IWL_PA_SYSTEM,
.max_ll_items = OTP_MAX_LL_ITEMS_6x50,
.shadow_ram_support = true,
@@ -1369,6 +1369,8 @@ void iwl_apm_stop(struct iwl_priv *priv)
{
unsigned long flags;
+ IWL_DEBUG_INFO(priv, "Stop card, put in low power state\n");
+
iwl_apm_stop_master(priv);
spin_lock_irqsave(&priv->lock, flags);
@@ -1382,6 +1384,118 @@ void iwl_apm_stop(struct iwl_priv *priv)
}
EXPORT_SYMBOL(iwl_apm_stop);
+
+/*
+ * Start up NIC's basic functionality after it has been reset
+ * (e.g. after platform boot, or shutdown via iwl_apm_stop())
+ * NOTE: This does not load uCode nor start the embedded processor
+ */
+int iwl_apm_init(struct iwl_priv *priv)
+{
+ int ret = 0;
+ u16 lctl;
+
+ IWL_DEBUG_INFO(priv, "Init card's basic functions\n");
+
+ /*
+ * Use "set_bit" below rather than "write", to preserve any hardware
+ * bits already set by default after reset.
+ */
+
+ /* Disable L0S exit timer (platform NMI Work/Around) */
+ iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
+ CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
+
+ /*
+ * Disable L0s without affecting L1;
+ * don't wait for ICH L0s (ICH bug W/A)
+ */
+ iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
+ CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
+
+ /* Set FH wait threshold to maximum (HW error during stress W/A) */
+ iwl_set_bit(priv, CSR_DBG_HPET_MEM_REG, CSR_DBG_HPET_MEM_REG_VAL);
+
+ /*
+ * Enable HAP INTA (interrupt from management bus) to
+ * wake device's PCI Express link L1a -> L0s
+ * NOTE: This is no-op for 3945 (non-existant bit)
+ */
+ iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
+ CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A);
+
+ /*
+ * HW bug W/A - costs negligible power consumption ...
+ * Check if BIOS (or OS) enabled L1-ASPM on this device
+ */
+ if (priv->cfg->set_l0s) {
+ lctl = iwl_pcie_link_ctl(priv);
+ if ((lctl & PCI_CFG_LINK_CTRL_VAL_L1_EN) ==
+ PCI_CFG_LINK_CTRL_VAL_L1_EN) {
+ /* L1-ASPM enabled; disable(!) L0S */
+ iwl_set_bit(priv, CSR_GIO_REG,
+ CSR_GIO_REG_VAL_L0S_ENABLED);
+ IWL_DEBUG_POWER(priv, "L1 Enabled; Disabling L0S\n");
+ } else {
+ /* L1-ASPM disabled; enable(!) L0S */
+ iwl_clear_bit(priv, CSR_GIO_REG,
+ CSR_GIO_REG_VAL_L0S_ENABLED);
+ IWL_DEBUG_POWER(priv, "L1 Disabled; Enabling L0S\n");
+ }
+ }
+
+ /* Configure analog phase-lock-loop before activating to D0A */
+ if (priv->cfg->pll_cfg_val)
+ iwl_set_bit(priv, CSR_ANA_PLL_CFG, priv->cfg->pll_cfg_val);
+
+ /*
+ * Set "initialization complete" bit to move adapter from
+ * D0U* --> D0A* (powered-up active) state.
+ */
+ iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
+
+ /*
+ * Wait for clock stabilization; once stabilized, access to
+ * device-internal resources is supported, e.g. iwl_write_prph()
+ * and accesses to uCode SRAM.
+ */
+ ret = iwl_poll_bit(priv, CSR_GP_CNTRL,
+ CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
+ CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
+ if (ret < 0) {
+ IWL_DEBUG_INFO(priv, "Failed to init the card\n");
+ goto out;
+ }
+
+ /*
+ * Enable DMA and BSM (if used) clocks, wait for them to stabilize.
+ * BSM (Boostrap State Machine) is only in 3945 and 4965;
+ * later devices (i.e. 5000 and later) have non-volatile SRAM,
+ * and don't need BSM to restore data after power-saving sleep.
+ *
+ * Write to "CLK_EN_REG"; "1" bits enable clocks, while "0" bits
+ * do not disable clocks. This preserves any hardware bits already
+ * set by default in "CLK_CTRL_REG" after reset.
+ */
+ if (priv->cfg->use_bsm)
+ iwl_write_prph(priv, APMG_CLK_EN_REG,
+ APMG_CLK_VAL_DMA_CLK_RQT | APMG_CLK_VAL_BSM_CLK_RQT);
+ else
+ iwl_write_prph(priv, APMG_CLK_EN_REG,
+ APMG_CLK_VAL_DMA_CLK_RQT);
+ udelay(20);
+
+ /* Disable L1-Active */
+ iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
+ APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
+
+out:
+ return ret;
+}
+EXPORT_SYMBOL(iwl_apm_init);
+
+
+
void iwl_configure_filter(struct ieee80211_hw *hw,
unsigned int changed_flags,
unsigned int *total_flags,
@@ -262,7 +262,12 @@ struct iwl_cfg {
const struct iwl_mod_params *mod_params;
u8 valid_tx_ant;
u8 valid_rx_ant;
- bool need_pll_cfg;
+
+ /* for iwl_apm_init() */
+ u32 pll_cfg_val;
+ bool set_l0s;
+ bool use_bsm;
+
bool use_isr_legacy;
enum iwl_pa_type pa_type;
const u16 max_ll_items;
@@ -663,6 +668,7 @@ void iwl_rx_reply_compressed_ba(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb);
void iwl_apm_stop(struct iwl_priv *priv);
int iwl_apm_stop_master(struct iwl_priv *priv);
+int iwl_apm_init(struct iwl_priv *priv);
void iwl_setup_rxon_timing(struct iwl_priv *priv);
static inline int iwl_send_rxon_assoc(struct iwl_priv *priv)
@@ -85,7 +85,6 @@ extern void iwl5000_rts_tx_cmd_flag(struct ieee80211_tx_info *info,
__le32 *tx_flags);
extern int iwl5000_calc_rssi(struct iwl_priv *priv,
struct iwl_rx_phy_res *rx_resp);
-extern int iwl5000_apm_init(struct iwl_priv *priv);
extern void iwl5000_nic_config(struct iwl_priv *priv);
extern u16 iwl5000_eeprom_calib_version(struct iwl_priv *priv);
extern const u8 *iwl5000_eeprom_query_addr(const struct iwl_priv *priv,