@@ -1309,7 +1309,8 @@ static void ath9k_hw_override_ini(struct ath_hw *ah,
* AR9271 1.1
*/
if (AR_SREV_9271_10(ah)) {
- val = REG_READ(ah, AR_PHY_SPECTRAL_SCAN) | AR_PHY_SPECTRAL_SCAN_ENABLE;
+ val = REG_READ(ah, AR_PHY_SPECTRAL_SCAN) |
+ AR_PHY_SPECTRAL_SCAN_ENABLE;
REG_WRITE(ah, AR_PHY_SPECTRAL_SCAN, val);
}
else if (AR_SREV_9271_11(ah))
@@ -192,8 +192,20 @@ void ath9k_hw_decrease_chain_power(struct ath_hw *ah,
#define AR_PHY_PLL_CTL_44_2133 0xeb
#define AR_PHY_PLL_CTL_40_2133 0xea
-#define AR_PHY_SPECTRAL_SCAN 0x9912
-#define AR_PHY_SPECTRAL_SCAN_ENABLE 0x1
+#define AR_PHY_SPECTRAL_SCAN 0x9910 /* AR9280 spectral scan configuration register */
+#define AR_PHY_SPECTRAL_SCAN_ENABLE 0x1
+#define AR_PHY_SPECTRAL_SCAN_ENA 0x00000001 /* Enable spectral scan, reg 68, bit 0 */
+#define AR_PHY_SPECTRAL_SCAN_ENA_S 0 /* Enable spectral scan, reg 68, bit 0 */
+#define AR_PHY_SPECTRAL_SCAN_ACTIVE 0x00000002 /* Activate spectral scan reg 68, bit 1*/
+#define AR_PHY_SPECTRAL_SCAN_ACTIVE_S 1 /* Activate spectral scan reg 68, bit 1*/
+#define AR_PHY_SPECTRAL_SCAN_FFT_PERIOD 0x000000F0 /* Interval for FFT reports, reg 68, bits 4-7*/
+#define AR_PHY_SPECTRAL_SCAN_FFT_PERIOD_S 4
+#define AR_PHY_SPECTRAL_SCAN_PERIOD 0x0000FF00 /* Interval for FFT reports, reg 68, bits 8-15*/
+#define AR_PHY_SPECTRAL_SCAN_PERIOD_S 8
+#define AR_PHY_SPECTRAL_SCAN_COUNT 0x00FF0000 /* Number of reports, reg 68, bits 16-23*/
+#define AR_PHY_SPECTRAL_SCAN_COUNT_S 16
+#define AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT 0x01000000 /* Short repeat, reg 68, bit 24*/
+#define AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT_S 24 /* Short repeat, reg 68, bit 24*/
#define AR_PHY_RX_DELAY 0x9914
#define AR_PHY_SEARCH_START_DELAY 0x9918