wl1251: add support for dedicated IRQ line

Commit Message

Grazvydas Ignotas April 16, 2010, 10:22 a.m. UTC

None

Patch

diff --git a/drivers/net/wireless/wl12xx/wl1251_sdio.c b/drivers/net/wireless/wl12xx/wl1251_sdio.c
index 7409c34..d234285 100644
--- a/drivers/net/wireless/wl12xx/wl1251_sdio.c
+++ b/drivers/net/wireless/wl12xx/wl1251_sdio.c
@@ -25,6 +25,7 @@ 
 #include <linux/mmc/sdio_ids.h>
 #include <linux/platform_device.h>
 #include <linux/spi/wl12xx.h>
+#include <linux/irq.h>
 
 #include "wl1251.h"
 
@@ -134,18 +135,36 @@  static void wl1251_sdio_disable_irq(struct wl1251 *wl)
 	sdio_release_host(func);
 }
 
+/* Interrupts when using dedicated WLAN_IRQ pin */
+static irqreturn_t wl1251_line_irq(int irq, void *cookie)
+{
+	struct wl1251 *wl = cookie;
+
+	ieee80211_queue_work(wl->hw, &wl->irq_work);
+
+	return IRQ_HANDLED;
+}
+
+static void wl1251_enable_line_irq(struct wl1251 *wl)
+{
+	return enable_irq(wl->irq);
+}
+
+static void wl1251_disable_line_irq(struct wl1251 *wl)
+{
+	return disable_irq(wl->irq);
+}
+
 static void wl1251_sdio_set_power(bool enable)
 {
 }
 
-static const struct wl1251_if_operations wl1251_sdio_ops = {
+static struct wl1251_if_operations wl1251_sdio_ops = {
 	.read = wl1251_sdio_read,
 	.write = wl1251_sdio_write,
 	.write_elp = wl1251_sdio_write_elp,
 	.read_elp = wl1251_sdio_read_elp,
 	.reset = wl1251_sdio_reset,
-	.enable_irq = wl1251_sdio_enable_irq,
-	.disable_irq = wl1251_sdio_disable_irq,
 };
 
 static int wl1251_platform_probe(struct platform_device *pdev)
@@ -191,6 +210,7 @@  static int wl1251_sdio_probe(struct sdio_func *func,
 		goto release;
 
 	sdio_set_block_size(func, 512);
+	sdio_release_host(func);
 
 	SET_IEEE80211_DEV(hw, &func->dev);
 	wl->if_priv = func;
@@ -199,17 +219,41 @@  static int wl1251_sdio_probe(struct sdio_func *func,
 
 	if (wl12xx_board_data != NULL) {
 		wl->set_power = wl12xx_board_data->set_power;
+		wl->irq = wl12xx_board_data->irq;
 		wl->use_eeprom = wl12xx_board_data->use_eeprom;
 	}
 
-	sdio_release_host(func);
+	if (wl->irq) {
+		ret = request_irq(wl->irq, wl1251_line_irq, 0, "wl1251", wl);
+		if (ret < 0) {
+			wl1251_error("request_irq() failed: %d", ret);
+			goto disable;
+		}
+
+		set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING);
+		disable_irq(wl->irq);
+
+		wl1251_sdio_ops.enable_irq = wl1251_enable_line_irq;
+		wl1251_sdio_ops.disable_irq = wl1251_disable_line_irq;
+
+		wl1251_info("using dedicated interrupt line");
+	} else {
+		wl1251_sdio_ops.enable_irq = wl1251_sdio_enable_irq;
+		wl1251_sdio_ops.disable_irq = wl1251_sdio_disable_irq;
+
+		wl1251_info("using SDIO interrupt");
+	}
+
 	ret = wl1251_init_ieee80211(wl);
 	if (ret)
-		goto disable;
+		goto out_free_irq;
 
 	sdio_set_drvdata(func, wl);
 	return ret;
 
+out_free_irq:
+	if (wl->irq)
+		free_irq(wl->irq, wl);
 disable:
 	sdio_claim_host(func);
 	sdio_disable_func(func);
@@ -222,6 +266,8 @@  static void __devexit wl1251_sdio_remove(struct sdio_func *func)
 {
 	struct wl1251 *wl = sdio_get_drvdata(func);
 
+	if (wl->irq)
+		free_irq(wl->irq, wl);
 	wl1251_free_hw(wl);
 
 	sdio_claim_host(func);
diff --git a/include/linux/spi/wl12xx.h b/include/linux/spi/wl12xx.h
index aed64ed..a223ecb 100644
--- a/include/linux/spi/wl12xx.h
+++ b/include/linux/spi/wl12xx.h
@@ -26,6 +26,8 @@ 
 
 struct wl12xx_platform_data {
 	void (*set_power)(bool enable);
+	/* SDIO only: IRQ number if WLAN_IRQ line is used, 0 for SDIO IRQs */
+	int irq;
 	bool use_eeprom;
 };