@@ -20,6 +20,7 @@
#include <linux/etherdevice.h>
#include <linux/device.h>
#include <linux/leds.h>
+#include <linux/completion.h>
#include "debug.h"
#include "common.h"
@@ -224,6 +225,7 @@ struct ath_buf_state {
int bfs_tidno;
int bfs_retries;
u8 bf_type;
+ u8 bfs_paprd;
u32 bfs_keyix;
enum ath9k_key_type bfs_keytype;
};
@@ -280,6 +282,7 @@ struct ath_tx_control {
struct ath_txq *txq;
int if_id;
enum ath9k_internal_frame_type frame_type;
+ u8 paprd;
};
#define ATH_TX_ERROR 0x01
@@ -422,6 +425,7 @@ int ath_beaconq_config(struct ath_softc *sc);
#define ATH_LONG_CALINTERVAL 30000 /* 30 seconds */
#define ATH_RESTART_CALINTERVAL 1200000 /* 20 minutes */
+void ath_paprd_calibrate(struct work_struct *work);
void ath_ani_calibrate(unsigned long data);
/**********/
@@ -553,6 +557,9 @@ struct ath_softc {
spinlock_t sc_serial_rw;
spinlock_t sc_pm_lock;
struct mutex mutex;
+ struct work_struct paprd_work;
+ struct completion paprd_complete;
+ int paprd_txok;
u32 intrstatus;
u32 sc_flags; /* SC_OP_* */
@@ -736,6 +736,7 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, u16 subsysid,
goto error_world;
}
+ INIT_WORK(&sc->paprd_work, ath_paprd_calibrate);
INIT_WORK(&sc->chan_work, ath9k_wiphy_chan_work);
INIT_DELAYED_WORK(&sc->wiphy_work, ath9k_wiphy_work);
sc->wiphy_scheduler_int = msecs_to_jiffies(500);
@@ -232,6 +232,113 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
return r;
}
+static void ath_paprd_activate(struct ath_softc *sc)
+{
+ struct ath_hw *ah = sc->sc_ah;
+ int chain;
+
+ if (!ah->curchan->paprd_done)
+ return;
+
+ ath9k_ps_wakeup(sc);
+ for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) {
+ if (!(ah->caps.tx_chainmask & BIT(chain)))
+ continue;
+
+ ar9003_paprd_populate_single_table(ah, ah->curchan, chain);
+ }
+
+ ar9003_paprd_enable(ah, true);
+ ath9k_ps_restore(sc);
+}
+
+void ath_paprd_calibrate(struct work_struct *work)
+{
+ struct ath_softc *sc = container_of(work, struct ath_softc, paprd_work);
+ struct ieee80211_hw *hw = sc->hw;
+ struct ath_hw *ah = sc->sc_ah;
+ struct ieee80211_hdr *hdr;
+ struct sk_buff *skb = NULL;
+ struct ieee80211_tx_info *tx_info;
+ int band = hw->conf.channel->band;
+ struct ieee80211_supported_band *sband = &sc->sbands[band];
+ struct ath_tx_control txctl;
+ int qnum, ftype;
+ int chain_ok = 0;
+ int chain;
+ int len = 1800;
+ int time_left;
+ int i;
+
+ ath9k_ps_wakeup(sc);
+ skb = alloc_skb(len, GFP_KERNEL);
+ if (!skb)
+ return;
+
+ tx_info = IEEE80211_SKB_CB(skb);
+
+ skb_put(skb, len);
+ memset(skb->data, 0, len);
+ hdr = (struct ieee80211_hdr *)skb->data;
+ ftype = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC;
+ hdr->frame_control = cpu_to_le16(ftype);
+ hdr->duration_id = 10;
+ memcpy(hdr->addr1, hw->wiphy->perm_addr, ETH_ALEN);
+ memcpy(hdr->addr2, hw->wiphy->perm_addr, ETH_ALEN);
+ memcpy(hdr->addr3, hw->wiphy->perm_addr, ETH_ALEN);
+
+ memset(&txctl, 0, sizeof(txctl));
+ qnum = sc->tx.hwq_map[WME_AC_BE];
+ txctl.txq = &sc->tx.txq[qnum];
+
+ ar9003_paprd_init_table(ah);
+ for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) {
+ if (!(ah->caps.tx_chainmask & BIT(chain)))
+ continue;
+
+ chain_ok = 0;
+ memset(tx_info, 0, sizeof(*tx_info));
+ tx_info->band = band;
+
+ for (i = 0; i < 4; i++) {
+ tx_info->control.rates[i].idx = sband->n_bitrates - 1;
+ tx_info->control.rates[i].count = 6;
+ }
+
+ init_completion(&sc->paprd_complete);
+ ar9003_paprd_setup_gain_table(ah, chain);
+ txctl.paprd = BIT(chain);
+ if (ath_tx_start(hw, skb, &txctl) != 0)
+ break;
+
+ time_left = wait_for_completion_timeout(&sc->paprd_complete,
+ 100);
+ if (!time_left) {
+ ath_print(ath9k_hw_common(ah), ATH_DBG_CALIBRATE,
+ "Timeout waiting for paprd training on "
+ "TX chain %d\n",
+ chain);
+ break;
+ }
+
+ if (!ar9003_paprd_is_done(ah))
+ break;
+
+ if (ar9003_paprd_create_curve(ah, ah->curchan, chain) != 0)
+ break;
+
+ chain_ok = 1;
+ }
+ kfree_skb(skb);
+
+ if (chain_ok) {
+ ah->curchan->paprd_done = true;
+ ath_paprd_activate(sc);
+ }
+
+ ath9k_ps_restore(sc);
+}
+
/*
* This routine performs the periodic noise floor calibration function
* that is used to adjust and optimize the chip performance. This
@@ -333,6 +440,13 @@ set_timer:
cal_interval = min(cal_interval, (u32)short_cal_interval);
mod_timer(&common->ani.timer, jiffies + msecs_to_jiffies(cal_interval));
+ if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_PAPRD) &&
+ !(sc->sc_flags & SC_OP_SCANNING)) {
+ if (!sc->sc_ah->curchan->paprd_done)
+ ieee80211_queue_work(sc->hw, &sc->paprd_work);
+ else
+ ath_paprd_activate(sc);
+ }
}
static void ath_start_ani(struct ath_common *common)
@@ -1131,6 +1245,7 @@ static void ath9k_stop(struct ieee80211_hw *hw)
cancel_delayed_work_sync(&sc->ath_led_blink_work);
cancel_delayed_work_sync(&sc->tx_complete_work);
+ cancel_work_sync(&sc->paprd_work);
if (!sc->num_sec_wiphy) {
cancel_delayed_work_sync(&sc->wiphy_work);
@@ -1846,6 +1961,7 @@ static void ath9k_sw_scan_start(struct ieee80211_hw *hw)
ath9k_wiphy_pause_all_forced(sc, aphy);
sc->sc_flags |= SC_OP_SCANNING;
del_timer_sync(&common->ani.timer);
+ cancel_work_sync(&sc->paprd_work);
cancel_delayed_work_sync(&sc->tx_complete_work);
mutex_unlock(&sc->mutex);
}
@@ -1637,12 +1637,13 @@ static int ath_tx_setup_buffer(struct ieee80211_hw *hw, struct ath_buf *bf,
bf->bf_frmlen -= padsize;
}
- if (conf_is_ht(&hw->conf)) {
+ if (!txctl->paprd && conf_is_ht(&hw->conf)) {
bf->bf_state.bf_type |= BUF_HT;
if (tx_info->flags & IEEE80211_TX_CTL_LDPC)
use_ldpc = true;
}
+ bf->bf_state.bfs_paprd = txctl->paprd;
bf->bf_flags = setup_tx_flags(skb, use_ldpc);
bf->bf_keytype = get_hw_crypto_keytype(skb);
@@ -1717,6 +1718,9 @@ static void ath_tx_start_dma(struct ath_softc *sc, struct ath_buf *bf,
bf->bf_buf_addr,
txctl->txq->axq_qnum);
+ if (bf->bf_state.bfs_paprd)
+ ar9003_hw_set_paprd_txdesc(ah, ds, bf->bf_state.bfs_paprd);
+
spin_lock_bh(&txctl->txq->axq_lock);
if (bf_isht(bf) && (sc->sc_flags & SC_OP_TXAGGR) &&
@@ -1938,8 +1942,14 @@ static void ath_tx_complete_buf(struct ath_softc *sc, struct ath_buf *bf,
}
dma_unmap_single(sc->dev, bf->bf_dmacontext, skb->len, DMA_TO_DEVICE);
- ath_tx_complete(sc, skb, bf->aphy, tx_flags);
- ath_debug_stat_tx(sc, txq, bf, ts);
+
+ if (bf->bf_state.bfs_paprd) {
+ sc->paprd_txok = txok;
+ complete(&sc->paprd_complete);
+ } else {
+ ath_tx_complete(sc, skb, bf->aphy, tx_flags);
+ ath_debug_stat_tx(sc, txq, bf, ts);
+ }
/*
* Return the list of ath_buf of this mpdu to free queue