different scan configurations (in my current office environment):
dwell-time 60000 3x probe-req == ~60 results
40000 3x probe-req == ~50 results
30000 3x probe-req == ~40 results
dwell-time 60000 2x probe-req == ~70 results
40000 2x probe-req == ~60 results
30000 2x probe-req == ~58 results
The above are results for a cumulative 3 scan run. For individual scans, the
number of results drop slightly more.
Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
---
drivers/net/wireless/wl12xx/wl1271_conf.h | 39 +++++++++++++++++++++++++++++
drivers/net/wireless/wl12xx/wl1271_main.c | 9 ++++++-
drivers/net/wireless/wl12xx/wl1271_scan.c | 18 +++++++++---
drivers/net/wireless/wl12xx/wl1271_scan.h | 3 --
4 files changed, 60 insertions(+), 9 deletions(-)
@@ -1016,6 +1016,44 @@ struct conf_roam_trigger_settings {
u8 avg_weight_snr_data;
};
+struct conf_scan_settings {
+ /*
+ * The minimum time to wait on each channel for active scans
+ *
+ * Range: 0 - 65536 tu
+ */
+ u16 min_dwell_time_active;
+
+ /*
+ * The maximum time to wait on each channel for active scans
+ *
+ * Range: 0 - 65536 tu
+ */
+ u16 max_dwell_time_active;
+
+ /*
+ * The maximum time to wait on each channel for passive scans
+ *
+ * Range: 0 - 65536 tu
+ */
+ u16 min_dwell_time_passive;
+
+ /*
+ * The maximum time to wait on each channel for passive scans
+ *
+ * Range: 0 - 65536 tu
+ */
+ u16 max_dwell_time_passive;
+
+ /*
+ * Number of probe requests to transmit on each active scan channel
+ *
+ * Range: u8
+ */
+ u16 num_probe_reqs;
+
+};
+
struct conf_drv_settings {
struct conf_sg_settings sg;
struct conf_rx_settings rx;
@@ -1024,6 +1062,7 @@ struct conf_drv_settings {
struct conf_itrim_settings itrim;
struct conf_pm_config_settings pm_config;
struct conf_roam_trigger_settings roam_trigger;
+ struct conf_scan_settings scan;
};
#endif
@@ -232,7 +232,14 @@ static struct conf_drv_settings default_conf = {
.avg_weight_rssi_data = 10,
.avg_weight_snr_beacon = 20,
.avg_weight_snr_data = 10
- }
+ },
+ .scan = {
+ .min_dwell_time_active = 7500,
+ .max_dwell_time_active = 30000,
+ .min_dwell_time_passive = 30000,
+ .max_dwell_time_passive = 60000,
+ .num_probe_reqs = 2,
+ },
};
static void __wl1271_op_remove_interface(struct wl1271 *wl);
@@ -64,6 +64,7 @@ static int wl1271_get_scan_channels(struct wl1271 *wl,
struct basic_scan_channel_params *channels,
enum ieee80211_band band, bool passive)
{
+ struct conf_scan_settings *c = &wl->conf.scan;
int i, j;
u32 flags;
@@ -91,10 +92,17 @@ static int wl1271_get_scan_channels(struct wl1271 *wl,
wl1271_debug(DEBUG_SCAN, "beacon_found %d",
req->channels[i]->beacon_found);
- channels[j].min_duration =
- cpu_to_le32(WL1271_SCAN_CHAN_MIN_DURATION);
- channels[j].max_duration =
- cpu_to_le32(WL1271_SCAN_CHAN_MAX_DURATION);
+ if (!passive) {
+ channels[j].min_duration =
+ cpu_to_le32(c->min_dwell_time_active);
+ channels[j].max_duration =
+ cpu_to_le32(c->max_dwell_time_active);
+ } else {
+ channels[j].min_duration =
+ cpu_to_le32(c->min_dwell_time_passive);
+ channels[j].max_duration =
+ cpu_to_le32(c->max_dwell_time_passive);
+ }
channels[j].early_termination = 0;
channels[j].tx_power_att = req->channels[i]->max_power;
channels[j].channel = req->channels[i]->hw_value;
@@ -151,7 +159,7 @@ static int wl1271_scan_send(struct wl1271 *wl, enum ieee80211_band band,
cmd->params.rx_filter_options =
cpu_to_le32(CFG_RX_PRSP_EN | CFG_RX_MGMT_EN | CFG_RX_BCN_EN);
- cmd->params.n_probe_reqs = WL1271_SCAN_PROBE_REQS;
+ cmd->params.n_probe_reqs = wl->conf.scan.num_probe_reqs;
cmd->params.tx_rate = cpu_to_le32(basic_rate);
cmd->params.tid_trigger = 0;
cmd->params.scan_tag = WL1271_SCAN_DEFAULT_TAG;
@@ -40,11 +40,8 @@ void wl1271_scan_complete_work(struct work_struct *work);
#define WL1271_SCAN_OPT_ACTIVE 0
#define WL1271_SCAN_OPT_PASSIVE 1
#define WL1271_SCAN_OPT_PRIORITY_HIGH 4
-#define WL1271_SCAN_CHAN_MIN_DURATION 30000 /* TU */
-#define WL1271_SCAN_CHAN_MAX_DURATION 60000 /* TU */
#define WL1271_SCAN_BAND_2_4_GHZ 0
#define WL1271_SCAN_BAND_5_GHZ 1
-#define WL1271_SCAN_PROBE_REQS 3
#define WL1271_SCAN_TIMEOUT 10000 /* msec */