@@ -487,6 +487,7 @@ static struct iwl_base_params iwl6000_base_params = {
.ucode_tracing = true,
.sensitivity_calib_by_driver = true,
.chain_noise_calib_by_driver = true,
+ .shadow_reg_enable = true,
};
static struct iwl_base_params iwl6050_base_params = {
@@ -510,6 +511,7 @@ static struct iwl_base_params iwl6050_base_params = {
.ucode_tracing = true,
.sensitivity_calib_by_driver = true,
.chain_noise_calib_by_driver = true,
+ .shadow_reg_enable = true,
};
static struct iwl_base_params iwl6000_coex_base_params = {
.eeprom_size = OTP_LOW_IMAGE_SIZE,
@@ -532,6 +534,7 @@ static struct iwl_base_params iwl6000_coex_base_params = {
.ucode_tracing = true,
.sensitivity_calib_by_driver = true,
.chain_noise_calib_by_driver = true,
+ .shadow_reg_enable = true,
};
static struct iwl_ht_params iwl6000_ht_params = {
@@ -750,6 +750,12 @@ int iwlagn_hw_nic_init(struct iwl_priv *priv)
} else
iwlagn_txq_ctx_reset(priv);
+ if (priv->cfg->base_params->shadow_reg_enable) {
+ /* enable shadow regs in HW */
+ iwl_set_bit(priv, CSR_MAC_SHADOW_REG_CTRL,
+ 0x800FFFFF);
+ }
+
set_bit(STATUS_INIT, &priv->status);
return 0;
@@ -290,6 +290,7 @@ struct iwl_mod_params {
* sensitivity calibration operation
* @chain_noise_calib_by_driver: driver has the capability to perform
* chain noise calibration operation
+ * @shadow_reg_enable: HW shadhow register bit
*/
struct iwl_base_params {
int eeprom_size;
@@ -320,6 +321,7 @@ struct iwl_base_params {
const bool ucode_tracing;
const bool sensitivity_calib_by_driver;
const bool chain_noise_calib_by_driver;
+ const bool shadow_reg_enable;
};
/*
* @advanced_bt_coexist: support advanced bt coexist
@@ -132,6 +132,8 @@
#define CSR_LED_REG (CSR_BASE+0x094)
#define CSR_DRAM_INT_TBL_REG (CSR_BASE+0x0A0)
+#define CSR_MAC_SHADOW_REG_CTRL (CSR_BASE+0x0A8) /* 6000 and up */
+
/* GIO Chicken Bits (PCI Express bus link power management) */
#define CSR_GIO_CHICKEN_BITS (CSR_BASE+0x100)
@@ -134,28 +134,37 @@ void iwl_rx_queue_update_write_ptr(struct iwl_priv *priv, struct iwl_rx_queue *q
if (q->need_update == 0)
goto exit_unlock;
- /* If power-saving is in use, make sure device is awake */
- if (test_bit(STATUS_POWER_PMI, &priv->status)) {
- reg = iwl_read32(priv, CSR_UCODE_DRV_GP1);
-
- if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
- IWL_DEBUG_INFO(priv, "Rx queue requesting wakeup, GP1 = 0x%x\n",
- reg);
- iwl_set_bit(priv, CSR_GP_CNTRL,
- CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
- goto exit_unlock;
- }
-
- q->write_actual = (q->write & ~0x7);
- iwl_write_direct32(priv, rx_wrt_ptr_reg, q->write_actual);
-
- /* Else device is assumed to be awake */
- } else {
+ if (priv->cfg->base_params->shadow_reg_enable) {
+ /* shadow register enabled */
/* Device expects a multiple of 8 */
q->write_actual = (q->write & ~0x7);
iwl_write32(priv, rx_wrt_ptr_reg, q->write_actual);
- }
+ } else {
+ /* If power-saving is in use, make sure device is awake */
+ if (test_bit(STATUS_POWER_PMI, &priv->status)) {
+ reg = iwl_read32(priv, CSR_UCODE_DRV_GP1);
+
+ if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
+ IWL_DEBUG_INFO(priv,
+ "Rx queue requesting wakeup,"
+ " GP1 = 0x%x\n", reg);
+ iwl_set_bit(priv, CSR_GP_CNTRL,
+ CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
+ goto exit_unlock;
+ }
+ q->write_actual = (q->write & ~0x7);
+ iwl_write_direct32(priv, rx_wrt_ptr_reg,
+ q->write_actual);
+
+ /* Else device is assumed to be awake */
+ } else {
+ /* Device expects a multiple of 8 */
+ q->write_actual = (q->write & ~0x7);
+ iwl_write_direct32(priv, rx_wrt_ptr_reg,
+ q->write_actual);
+ }
+ }
q->need_update = 0;
exit_unlock:
@@ -49,30 +49,39 @@ void iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq)
if (txq->need_update == 0)
return;
- /* if we're trying to save power */
- if (test_bit(STATUS_POWER_PMI, &priv->status)) {
- /* wake up nic if it's powered down ...
- * uCode will wake up, and interrupt us again, so next
- * time we'll skip this part. */
- reg = iwl_read32(priv, CSR_UCODE_DRV_GP1);
-
- if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
- IWL_DEBUG_INFO(priv, "Tx queue %d requesting wakeup, GP1 = 0x%x\n",
- txq_id, reg);
- iwl_set_bit(priv, CSR_GP_CNTRL,
- CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
- return;
- }
-
- iwl_write_direct32(priv, HBUS_TARG_WRPTR,
- txq->q.write_ptr | (txq_id << 8));
-
- /* else not in power-save mode, uCode will never sleep when we're
- * trying to tx (during RFKILL, we're not trying to tx). */
- } else
+ if (priv->cfg->base_params->shadow_reg_enable) {
+ /* shadow register enabled */
iwl_write32(priv, HBUS_TARG_WRPTR,
txq->q.write_ptr | (txq_id << 8));
+ } else {
+ /* if we're trying to save power */
+ if (test_bit(STATUS_POWER_PMI, &priv->status)) {
+ /* wake up nic if it's powered down ...
+ * uCode will wake up, and interrupt us again, so next
+ * time we'll skip this part. */
+ reg = iwl_read32(priv, CSR_UCODE_DRV_GP1);
+
+ if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
+ IWL_DEBUG_INFO(priv,
+ "Tx queue %d requesting wakeup,"
+ " GP1 = 0x%x\n", txq_id, reg);
+ iwl_set_bit(priv, CSR_GP_CNTRL,
+ CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
+ return;
+ }
+
+ iwl_write_direct32(priv, HBUS_TARG_WRPTR,
+ txq->q.write_ptr | (txq_id << 8));
+ /*
+ * else not in power-save mode,
+ * uCode will never sleep when we're
+ * trying to tx (during RFKILL, we're not trying to tx).
+ */
+ } else
+ iwl_write32(priv, HBUS_TARG_WRPTR,
+ txq->q.write_ptr | (txq_id << 8));
+ }
txq->need_update = 0;
}
EXPORT_SYMBOL(iwl_txq_update_write_ptr);