@@ -51,6 +51,7 @@
#include "iwl-led.h"
#include "iwl-3945-led.h"
#include "iwl-3945-debugfs.h"
+#include "iwl-legacy.h"
#define IWL_DECLARE_RATE_INFO(r, ip, in, rp, rn, pp, np) \
[IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \
@@ -1223,66 +1223,6 @@ int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force)
}
EXPORT_SYMBOL(iwl_set_tx_power);
-irqreturn_t iwl_isr_legacy(int irq, void *data)
-{
- struct iwl_priv *priv = data;
- u32 inta, inta_mask;
- u32 inta_fh;
- unsigned long flags;
- if (!priv)
- return IRQ_NONE;
-
- spin_lock_irqsave(&priv->lock, flags);
-
- /* Disable (but don't clear!) interrupts here to avoid
- * back-to-back ISRs and sporadic interrupts from our NIC.
- * If we have something to service, the tasklet will re-enable ints.
- * If we *don't* have something, we'll re-enable before leaving here. */
- inta_mask = iwl_read32(priv, CSR_INT_MASK); /* just for debug */
- iwl_write32(priv, CSR_INT_MASK, 0x00000000);
-
- /* Discover which interrupts are active/pending */
- inta = iwl_read32(priv, CSR_INT);
- inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
-
- /* Ignore interrupt if there's nothing in NIC to service.
- * This may be due to IRQ shared with another device,
- * or due to sporadic interrupts thrown from our NIC. */
- if (!inta && !inta_fh) {
- IWL_DEBUG_ISR(priv, "Ignore interrupt, inta == 0, inta_fh == 0\n");
- goto none;
- }
-
- if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) {
- /* Hardware disappeared. It might have already raised
- * an interrupt */
- IWL_WARN(priv, "HARDWARE GONE?? INTA == 0x%08x\n", inta);
- goto unplugged;
- }
-
- IWL_DEBUG_ISR(priv, "ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
- inta, inta_mask, inta_fh);
-
- inta &= ~CSR_INT_BIT_SCD;
-
- /* iwl_irq_tasklet() will service interrupts and re-enable them */
- if (likely(inta || inta_fh))
- tasklet_schedule(&priv->irq_tasklet);
-
- unplugged:
- spin_unlock_irqrestore(&priv->lock, flags);
- return IRQ_HANDLED;
-
- none:
- /* re-enable interrupts here since we don't have anything to service. */
- /* only Re-enable if diabled by irq */
- if (test_bit(STATUS_INT_ENABLED, &priv->status))
- iwl_enable_interrupts(priv);
- spin_unlock_irqrestore(&priv->lock, flags);
- return IRQ_NONE;
-}
-EXPORT_SYMBOL(iwl_isr_legacy);
-
void iwl_send_bt_config(struct iwl_priv *priv)
{
struct iwl_bt_cmd bt_cmd = {
@@ -596,7 +596,6 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd);
/*****************************************************
* PCI *
*****************************************************/
-irqreturn_t iwl_isr_legacy(int irq, void *data);
static inline u16 iwl_pcie_link_ctl(struct iwl_priv *priv)
{
@@ -31,6 +31,7 @@
#include "iwl-dev.h"
#include "iwl-core.h"
+#include "iwl-helpers.h"
#include "iwl-legacy.h"
/**
@@ -558,3 +559,64 @@ void iwl_legacy_mac_bss_info_changed(struct ieee80211_hw *hw,
IWL_DEBUG_MAC80211(priv, "leave\n");
}
EXPORT_SYMBOL(iwl_legacy_mac_bss_info_changed);
+
+irqreturn_t iwl_isr_legacy(int irq, void *data)
+{
+ struct iwl_priv *priv = data;
+ u32 inta, inta_mask;
+ u32 inta_fh;
+ unsigned long flags;
+ if (!priv)
+ return IRQ_NONE;
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ /* Disable (but don't clear!) interrupts here to avoid
+ * back-to-back ISRs and sporadic interrupts from our NIC.
+ * If we have something to service, the tasklet will re-enable ints.
+ * If we *don't* have something, we'll re-enable before leaving here. */
+ inta_mask = iwl_read32(priv, CSR_INT_MASK); /* just for debug */
+ iwl_write32(priv, CSR_INT_MASK, 0x00000000);
+
+ /* Discover which interrupts are active/pending */
+ inta = iwl_read32(priv, CSR_INT);
+ inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
+
+ /* Ignore interrupt if there's nothing in NIC to service.
+ * This may be due to IRQ shared with another device,
+ * or due to sporadic interrupts thrown from our NIC. */
+ if (!inta && !inta_fh) {
+ IWL_DEBUG_ISR(priv,
+ "Ignore interrupt, inta == 0, inta_fh == 0\n");
+ goto none;
+ }
+
+ if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) {
+ /* Hardware disappeared. It might have already raised
+ * an interrupt */
+ IWL_WARN(priv, "HARDWARE GONE?? INTA == 0x%08x\n", inta);
+ goto unplugged;
+ }
+
+ IWL_DEBUG_ISR(priv, "ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
+ inta, inta_mask, inta_fh);
+
+ inta &= ~CSR_INT_BIT_SCD;
+
+ /* iwl_irq_tasklet() will service interrupts and re-enable them */
+ if (likely(inta || inta_fh))
+ tasklet_schedule(&priv->irq_tasklet);
+
+unplugged:
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return IRQ_HANDLED;
+
+none:
+ /* re-enable interrupts here since we don't have anything to service. */
+ /* only Re-enable if diabled by irq */
+ if (test_bit(STATUS_INT_ENABLED, &priv->status))
+ iwl_enable_interrupts(priv);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return IRQ_NONE;
+}
+EXPORT_SYMBOL(iwl_isr_legacy);
@@ -71,4 +71,6 @@ void iwl_legacy_mac_bss_info_changed(struct ieee80211_hw *hw,
struct ieee80211_bss_conf *bss_conf,
u32 changes);
+irqreturn_t iwl_isr_legacy(int irq, void *data);
+
#endif /* __iwl_legacy_h__ */