[19/26] ath9k_hw: Configure power control only for chain 0 on AR9485

Commit Message

Vasanthakumar Thiagarajan Dec. 1, 2010, 7:32 a.m. UTC

None

Patch

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 9d9d637..6115f36 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -4277,23 +4277,27 @@  static int ar9003_hw_power_control_override(struct ath_hw *ah,
 	REG_RMW(ah, AR_PHY_TPC_11_B0,
 		(correction[0] << AR_PHY_TPC_OLPC_GAIN_DELTA_S),
 		AR_PHY_TPC_OLPC_GAIN_DELTA);
-	REG_RMW(ah, AR_PHY_TPC_11_B1,
-		(correction[1] << AR_PHY_TPC_OLPC_GAIN_DELTA_S),
-		AR_PHY_TPC_OLPC_GAIN_DELTA);
-	REG_RMW(ah, AR_PHY_TPC_11_B2,
-		(correction[2] << AR_PHY_TPC_OLPC_GAIN_DELTA_S),
-		AR_PHY_TPC_OLPC_GAIN_DELTA);
+	if (!AR_SREV_9485(ah)) {
+		REG_RMW(ah, AR_PHY_TPC_11_B1,
+			(correction[1] << AR_PHY_TPC_OLPC_GAIN_DELTA_S),
+			AR_PHY_TPC_OLPC_GAIN_DELTA);
+		REG_RMW(ah, AR_PHY_TPC_11_B2,
+			(correction[2] << AR_PHY_TPC_OLPC_GAIN_DELTA_S),
+			AR_PHY_TPC_OLPC_GAIN_DELTA);
+	}
 
 	/* enable open loop power control on chip */
 	REG_RMW(ah, AR_PHY_TPC_6_B0,
 		(3 << AR_PHY_TPC_6_ERROR_EST_MODE_S),
 		AR_PHY_TPC_6_ERROR_EST_MODE);
-	REG_RMW(ah, AR_PHY_TPC_6_B1,
-		(3 << AR_PHY_TPC_6_ERROR_EST_MODE_S),
-		AR_PHY_TPC_6_ERROR_EST_MODE);
-	REG_RMW(ah, AR_PHY_TPC_6_B2,
-		(3 << AR_PHY_TPC_6_ERROR_EST_MODE_S),
-		AR_PHY_TPC_6_ERROR_EST_MODE);
+	if (!AR_SREV_9485(ah)) {
+		REG_RMW(ah, AR_PHY_TPC_6_B1,
+			(3 << AR_PHY_TPC_6_ERROR_EST_MODE_S),
+			AR_PHY_TPC_6_ERROR_EST_MODE);
+		REG_RMW(ah, AR_PHY_TPC_6_B2,
+			(3 << AR_PHY_TPC_6_ERROR_EST_MODE_S),
+			AR_PHY_TPC_6_ERROR_EST_MODE);
+	}
 
 	/*
 	 * enable temperature compensation