@@ -660,6 +660,10 @@ struct tpt_led_trigger {
* that the scan completed.
* @SCAN_ABORTED: Set for our scan work function when the driver reported
* a scan complete for an aborted scan.
+ * @SCAN_LEFT_OPER_CHANNEL: Set this flag if the scan process leaves the
+ * operating channel at any time. If scanning ONLY the current operating
+ * channel this flag should not be set, and this will allow fewer
+ * offchannel changes.
*/
enum {
SCAN_SW_SCANNING,
@@ -667,6 +671,7 @@ enum {
SCAN_OFF_CHANNEL,
SCAN_COMPLETED,
SCAN_ABORTED,
+ SCAN_LEFT_OPER_CHANNEL,
};
/**
@@ -1147,7 +1152,10 @@ void ieee80211_rx_bss_put(struct ieee80211_local *local,
struct ieee80211_bss *bss);
/* off-channel helpers */
-void ieee80211_offchannel_stop_beaconing(struct ieee80211_local *local);
+/* Returns true if hardware is currently configured for the operating channel
+ * and if the logical configured state is to be on the operating channel.
+ */
+bool ieee80211_on_oper_channel(struct ieee80211_local *local);
void ieee80211_offchannel_stop_station(struct ieee80211_local *local);
void ieee80211_offchannel_return(struct ieee80211_local *local,
bool enable_beaconing);
@@ -98,6 +98,39 @@ static void ieee80211_reconfig_filter(struct work_struct *work)
ieee80211_configure_filter(local);
}
+/** If we are configured to be off the operating channel,
+ * or if we are already off the operating channel, return
+ * false.
+ */
+bool ieee80211_on_oper_channel(struct ieee80211_local *local)
+{
+ struct ieee80211_channel *chan, *scan_chan;
+ enum nl80211_channel_type channel_type;
+
+ /** This logic needs to match logic in ieee80211_hw_config */
+ if (local->scan_channel) {
+ chan = local->scan_channel;
+ channel_type = NL80211_CHAN_NO_HT;
+ } else if (local->tmp_channel) {
+ chan = scan_chan = local->tmp_channel;
+ channel_type = local->tmp_channel_type;
+ } else {
+ chan = local->oper_channel;
+ channel_type = local->_oper_channel_type;
+ }
+
+ if (chan != local->oper_channel ||
+ channel_type != local->_oper_channel_type)
+ return false;
+
+ /* Check current hardware-config against oper_channel. */
+ if ((local->oper_channel != local->hw.conf.channel) ||
+ (local->_oper_channel_type != local->hw.conf.channel_type))
+ return false;
+
+ return true;
+}
+
int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
{
struct ieee80211_channel *chan, *scan_chan;
@@ -110,21 +143,27 @@ int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
scan_chan = local->scan_channel;
+ /* If this off-channel logic ever changes, ieee80211_on_oper_channel
+ * may need to change as well.
+ */
offchannel_flag = local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL;
if (scan_chan) {
chan = scan_chan;
channel_type = NL80211_CHAN_NO_HT;
- local->hw.conf.flags |= IEEE80211_CONF_OFFCHANNEL;
- } else if (local->tmp_channel &&
- local->oper_channel != local->tmp_channel) {
+ } else if (local->tmp_channel) {
chan = scan_chan = local->tmp_channel;
channel_type = local->tmp_channel_type;
- local->hw.conf.flags |= IEEE80211_CONF_OFFCHANNEL;
} else {
chan = local->oper_channel;
channel_type = local->_oper_channel_type;
- local->hw.conf.flags &= ~IEEE80211_CONF_OFFCHANNEL;
}
+
+ if (chan != local->oper_channel ||
+ channel_type != local->_oper_channel_type)
+ local->hw.conf.flags |= IEEE80211_CONF_OFFCHANNEL;
+ else
+ local->hw.conf.flags &= ~IEEE80211_CONF_OFFCHANNEL;
+
offchannel_flag ^= local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL;
if (offchannel_flag || chan != local->hw.conf.channel ||
@@ -183,6 +222,7 @@ int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
return ret;
}
+
void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
u32 changed)
{
@@ -231,7 +271,8 @@ void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
if (changed & BSS_CHANGED_BEACON_ENABLED) {
if (local->quiescing || !ieee80211_sdata_running(sdata) ||
- test_bit(SCAN_SW_SCANNING, &local->scanning)) {
+ test_bit(SCAN_OFF_CHANNEL, &local->scanning) ||
+ !ieee80211_on_oper_channel(local)) {
sdata->vif.bss_conf.enable_beacon = false;
} else {
/*
@@ -95,57 +95,33 @@ static void ieee80211_offchannel_ps_disable(struct ieee80211_sub_if_data *sdata)
ieee80211_sta_reset_conn_monitor(sdata);
}
-void ieee80211_offchannel_stop_beaconing(struct ieee80211_local *local)
+void ieee80211_offchannel_stop_station(struct ieee80211_local *local)
{
struct ieee80211_sub_if_data *sdata;
+ /*
+ * notify the AP about us leaving the channel and stop all STA interfaces
+ */
mutex_lock(&local->iflist_mtx);
list_for_each_entry(sdata, &local->interfaces, list) {
if (!ieee80211_sdata_running(sdata))
continue;
- /* disable beaconing */
+ /* Check to see if we should disable beaconing. */
if (sdata->vif.type == NL80211_IFTYPE_AP ||
sdata->vif.type == NL80211_IFTYPE_ADHOC ||
sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
ieee80211_bss_info_change_notify(
sdata, BSS_CHANGED_BEACON_ENABLED);
- /*
- * only handle non-STA interfaces here, STA interfaces
- * are handled in ieee80211_offchannel_stop_station(),
- * e.g., from the background scan state machine.
- *
- * In addition, do not stop monitor interface to allow it to be
- * used from user space controlled off-channel operations.
- */
- if (sdata->vif.type != NL80211_IFTYPE_STATION &&
- sdata->vif.type != NL80211_IFTYPE_MONITOR) {
- set_bit(SDATA_STATE_OFFCHANNEL, &sdata->state);
- netif_tx_stop_all_queues(sdata->dev);
- }
- }
- mutex_unlock(&local->iflist_mtx);
-}
-
-void ieee80211_offchannel_stop_station(struct ieee80211_local *local)
-{
- struct ieee80211_sub_if_data *sdata;
-
- /*
- * notify the AP about us leaving the channel and stop all STA interfaces
- */
- mutex_lock(&local->iflist_mtx);
- list_for_each_entry(sdata, &local->interfaces, list) {
- if (!ieee80211_sdata_running(sdata))
- continue;
-
- if (sdata->vif.type == NL80211_IFTYPE_STATION) {
+ if (sdata->vif.type != NL80211_IFTYPE_MONITOR) {
set_bit(SDATA_STATE_OFFCHANNEL, &sdata->state);
netif_tx_stop_all_queues(sdata->dev);
- if (sdata->u.mgd.associated)
+ if ((sdata->vif.type == NL80211_IFTYPE_STATION) &&
+ sdata->u.mgd.associated)
ieee80211_offchannel_ps_enable(sdata);
}
+
}
mutex_unlock(&local->iflist_mtx);
}
@@ -181,7 +157,7 @@ void ieee80211_offchannel_return(struct ieee80211_local *local,
netif_tx_wake_all_queues(sdata->dev);
}
- /* re-enable beaconing */
+ /* Check to see if we should re-enable beaconing */
if (enable_beaconing &&
(sdata->vif.type == NL80211_IFTYPE_AP ||
sdata->vif.type == NL80211_IFTYPE_ADHOC ||
@@ -388,6 +388,7 @@ ieee80211_rx_h_passive_scan(struct ieee80211_rx_data *rx)
struct ieee80211_local *local = rx->local;
struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb);
struct sk_buff *skb = rx->skb;
+ int ret;
if (likely(!(status->rx_flags & IEEE80211_RX_IN_SCAN)))
return RX_CONTINUE;
@@ -396,10 +397,14 @@ ieee80211_rx_h_passive_scan(struct ieee80211_rx_data *rx)
return ieee80211_scan_rx(rx->sdata, skb);
if (test_bit(SCAN_SW_SCANNING, &local->scanning)) {
- /* drop all the other packets during a software scan anyway */
- if (ieee80211_scan_rx(rx->sdata, skb) != RX_QUEUED)
+ ret = ieee80211_scan_rx(rx->sdata, skb);
+ /* drop all the other packets while scanning off channel */
+ if (ret != RX_QUEUED &&
+ test_bit(SCAN_OFF_CHANNEL, &local->scanning)) {
dev_kfree_skb(skb);
- return RX_QUEUED;
+ return RX_QUEUED;
+ }
+ return ret;
}
/* scanning finished during invoking of handlers */
@@ -2749,7 +2754,7 @@ static void __ieee80211_rx_handle_packet(struct ieee80211_hw *hw,
local->dot11ReceivedFragmentCount++;
if (unlikely(test_bit(SCAN_HW_SCANNING, &local->scanning) ||
- test_bit(SCAN_OFF_CHANNEL, &local->scanning)))
+ test_bit(SCAN_SW_SCANNING, &local->scanning)))
status->rx_flags |= IEEE80211_RX_IN_SCAN;
if (ieee80211_is_mgmt(fc))
@@ -294,11 +294,14 @@ static void __ieee80211_scan_completed_finish(struct ieee80211_hw *hw,
{
struct ieee80211_local *local = hw_to_local(hw);
- ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
+ if ((local->oper_channel != local->hw.conf.channel) || was_hw_scan)
+ ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
+
if (!was_hw_scan) {
ieee80211_configure_filter(local);
drv_sw_scan_complete(local);
- ieee80211_offchannel_return(local, true);
+ if (test_bit(SCAN_LEFT_OPER_CHANNEL, &local->scanning))
+ ieee80211_offchannel_return(local, true);
}
mutex_lock(&local->mtx);
@@ -398,13 +401,10 @@ static int ieee80211_start_sw_scan(struct ieee80211_local *local)
drv_sw_scan_start(local);
- ieee80211_offchannel_stop_beaconing(local);
-
local->leave_oper_channel_time = 0;
local->next_scan_state = SCAN_DECISION;
local->scan_channel_idx = 0;
-
- drv_flush(local, false);
+ __clear_bit(SCAN_LEFT_OPER_CHANNEL, &local->scanning);
ieee80211_configure_filter(local);
@@ -544,7 +544,18 @@ static void ieee80211_scan_state_decision(struct ieee80211_local *local,
}
mutex_unlock(&local->iflist_mtx);
- if (local->scan_channel) {
+ next_chan = local->scan_req->channels[local->scan_channel_idx];
+
+ if (local->oper_channel == local->hw.conf.channel) {
+ if (next_chan == local->oper_channel)
+ local->next_scan_state = SCAN_SET_CHANNEL;
+ else
+ /*
+ * we're on the operating channel currently, let's
+ * leave that channel now to scan another one
+ */
+ local->next_scan_state = SCAN_LEAVE_OPER_CHANNEL;
+ } else {
/*
* we're currently scanning a different channel, let's
* see if we can scan another channel without interfering
@@ -560,7 +571,6 @@ static void ieee80211_scan_state_decision(struct ieee80211_local *local,
*
* Otherwise switch back to the operating channel.
*/
- next_chan = local->scan_req->channels[local->scan_channel_idx];
bad_latency = time_after(jiffies +
ieee80211_scan_get_channel_time(next_chan),
@@ -578,12 +588,6 @@ static void ieee80211_scan_state_decision(struct ieee80211_local *local,
local->next_scan_state = SCAN_ENTER_OPER_CHANNEL;
else
local->next_scan_state = SCAN_SET_CHANNEL;
- } else {
- /*
- * we're on the operating channel currently, let's
- * leave that channel now to scan another one
- */
- local->next_scan_state = SCAN_LEAVE_OPER_CHANNEL;
}
*next_delay = 0;
@@ -592,9 +596,12 @@ static void ieee80211_scan_state_decision(struct ieee80211_local *local,
static void ieee80211_scan_state_leave_oper_channel(struct ieee80211_local *local,
unsigned long *next_delay)
{
+ /* This must be set before we do the stop_station logic. */
+ __set_bit(SCAN_OFF_CHANNEL, &local->scanning);
+
ieee80211_offchannel_stop_station(local);
- __set_bit(SCAN_OFF_CHANNEL, &local->scanning);
+ __set_bit(SCAN_LEFT_OPER_CHANNEL, &local->scanning);
/*
* What if the nullfunc frames didn't arrive?
@@ -641,8 +648,10 @@ static void ieee80211_scan_state_set_channel(struct ieee80211_local *local,
chan = local->scan_req->channels[local->scan_channel_idx];
local->scan_channel = chan;
- if (ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL))
- skip = 1;
+
+ if (chan != local->hw.conf.channel)
+ if (ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL))
+ skip = 1;
/* advance state machine to next channel/band */
local->scan_channel_idx++;
@@ -924,18 +924,17 @@ static void ieee80211_work_work(struct work_struct *work)
}
if (!started && !local->tmp_channel) {
- /*
- * TODO: could optimize this by leaving the
- * station vifs in awake mode if they
- * happen to be on the same channel as
- * the requested channel
- */
- ieee80211_offchannel_stop_beaconing(local);
- ieee80211_offchannel_stop_station(local);
-
local->tmp_channel = wk->chan;
local->tmp_channel_type = wk->chan_type;
- ieee80211_hw_config(local, 0);
+ if (!ieee80211_on_oper_channel(local)) {
+ /*
+ * Leave the station vifs in awake mode if they
+ * happen to be on the same channel as
+ * the requested channel
+ */
+ ieee80211_offchannel_stop_station(local);
+ ieee80211_hw_config(local, 0);
+ }
started = true;
wk->timeout = jiffies;
}