deleted file mode 100644
@@ -1,195 +0,0 @@
-// ------------------------------------------------------------------
-// Copyright (c) 2004-2010 Atheros Corporation. All rights reserved.
-//
-//
-// Permission to use, copy, modify, and/or distribute this software for any
-// purpose with or without fee is hereby granted, provided that the above
-// copyright notice and this permission notice appear in all copies.
-//
-// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-//
-//
-// ------------------------------------------------------------------
-//===================================================================
-// Author(s): ="Atheros"
-//===================================================================
-
-
-#ifndef _VMC_WLAN_REG_REG_H_
-#define _VMC_WLAN_REG_REG_H_
-
-#define WLAN_MC_BCAM_VALID_ADDRESS 0x00000000
-#define WLAN_MC_BCAM_VALID_OFFSET 0x00000000
-#define WLAN_MC_BCAM_VALID_BIT_MSB 0
-#define WLAN_MC_BCAM_VALID_BIT_LSB 0
-#define WLAN_MC_BCAM_VALID_BIT_MASK 0x00000001
-#define WLAN_MC_BCAM_VALID_BIT_GET(x) (((x) & WLAN_MC_BCAM_VALID_BIT_MASK) >> WLAN_MC_BCAM_VALID_BIT_LSB)
-#define WLAN_MC_BCAM_VALID_BIT_SET(x) (((x) << WLAN_MC_BCAM_VALID_BIT_LSB) & WLAN_MC_BCAM_VALID_BIT_MASK)
-
-#define WLAN_MC_BCAM_COMPARE_ADDRESS 0x00000200
-#define WLAN_MC_BCAM_COMPARE_OFFSET 0x00000200
-#define WLAN_MC_BCAM_COMPARE_KEY_MSB 19
-#define WLAN_MC_BCAM_COMPARE_KEY_LSB 2
-#define WLAN_MC_BCAM_COMPARE_KEY_MASK 0x000ffffc
-#define WLAN_MC_BCAM_COMPARE_KEY_GET(x) (((x) & WLAN_MC_BCAM_COMPARE_KEY_MASK) >> WLAN_MC_BCAM_COMPARE_KEY_LSB)
-#define WLAN_MC_BCAM_COMPARE_KEY_SET(x) (((x) << WLAN_MC_BCAM_COMPARE_KEY_LSB) & WLAN_MC_BCAM_COMPARE_KEY_MASK)
-
-#define WLAN_MC_BCAM_TARGET_ADDRESS 0x00000400
-#define WLAN_MC_BCAM_TARGET_OFFSET 0x00000400
-#define WLAN_MC_BCAM_TARGET_INST_MSB 31
-#define WLAN_MC_BCAM_TARGET_INST_LSB 0
-#define WLAN_MC_BCAM_TARGET_INST_MASK 0xffffffff
-#define WLAN_MC_BCAM_TARGET_INST_GET(x) (((x) & WLAN_MC_BCAM_TARGET_INST_MASK) >> WLAN_MC_BCAM_TARGET_INST_LSB)
-#define WLAN_MC_BCAM_TARGET_INST_SET(x) (((x) << WLAN_MC_BCAM_TARGET_INST_LSB) & WLAN_MC_BCAM_TARGET_INST_MASK)
-
-#define WLAN_APB_ADDR_ERROR_CONTROL_ADDRESS 0x00000600
-#define WLAN_APB_ADDR_ERROR_CONTROL_OFFSET 0x00000600
-#define WLAN_APB_ADDR_ERROR_CONTROL_QUAL_ENABLE_MSB 1
-#define WLAN_APB_ADDR_ERROR_CONTROL_QUAL_ENABLE_LSB 1
-#define WLAN_APB_ADDR_ERROR_CONTROL_QUAL_ENABLE_MASK 0x00000002
-#define WLAN_APB_ADDR_ERROR_CONTROL_QUAL_ENABLE_GET(x) (((x) & WLAN_APB_ADDR_ERROR_CONTROL_QUAL_ENABLE_MASK) >> WLAN_APB_ADDR_ERROR_CONTROL_QUAL_ENABLE_LSB)
-#define WLAN_APB_ADDR_ERROR_CONTROL_QUAL_ENABLE_SET(x) (((x) << WLAN_APB_ADDR_ERROR_CONTROL_QUAL_ENABLE_LSB) & WLAN_APB_ADDR_ERROR_CONTROL_QUAL_ENABLE_MASK)
-#define WLAN_APB_ADDR_ERROR_CONTROL_ENABLE_MSB 0
-#define WLAN_APB_ADDR_ERROR_CONTROL_ENABLE_LSB 0
-#define WLAN_APB_ADDR_ERROR_CONTROL_ENABLE_MASK 0x00000001
-#define WLAN_APB_ADDR_ERROR_CONTROL_ENABLE_GET(x) (((x) & WLAN_APB_ADDR_ERROR_CONTROL_ENABLE_MASK) >> WLAN_APB_ADDR_ERROR_CONTROL_ENABLE_LSB)
-#define WLAN_APB_ADDR_ERROR_CONTROL_ENABLE_SET(x) (((x) << WLAN_APB_ADDR_ERROR_CONTROL_ENABLE_LSB) & WLAN_APB_ADDR_ERROR_CONTROL_ENABLE_MASK)
-
-#define WLAN_APB_ADDR_ERROR_STATUS_ADDRESS 0x00000604
-#define WLAN_APB_ADDR_ERROR_STATUS_OFFSET 0x00000604
-#define WLAN_APB_ADDR_ERROR_STATUS_WRITE_MSB 25
-#define WLAN_APB_ADDR_ERROR_STATUS_WRITE_LSB 25
-#define WLAN_APB_ADDR_ERROR_STATUS_WRITE_MASK 0x02000000
-#define WLAN_APB_ADDR_ERROR_STATUS_WRITE_GET(x) (((x) & WLAN_APB_ADDR_ERROR_STATUS_WRITE_MASK) >> WLAN_APB_ADDR_ERROR_STATUS_WRITE_LSB)
-#define WLAN_APB_ADDR_ERROR_STATUS_WRITE_SET(x) (((x) << WLAN_APB_ADDR_ERROR_STATUS_WRITE_LSB) & WLAN_APB_ADDR_ERROR_STATUS_WRITE_MASK)
-#define WLAN_APB_ADDR_ERROR_STATUS_ADDRESS_MSB 24
-#define WLAN_APB_ADDR_ERROR_STATUS_ADDRESS_LSB 0
-#define WLAN_APB_ADDR_ERROR_STATUS_ADDRESS_MASK 0x01ffffff
-#define WLAN_APB_ADDR_ERROR_STATUS_ADDRESS_GET(x) (((x) & WLAN_APB_ADDR_ERROR_STATUS_ADDRESS_MASK) >> WLAN_APB_ADDR_ERROR_STATUS_ADDRESS_LSB)
-#define WLAN_APB_ADDR_ERROR_STATUS_ADDRESS_SET(x) (((x) << WLAN_APB_ADDR_ERROR_STATUS_ADDRESS_LSB) & WLAN_APB_ADDR_ERROR_STATUS_ADDRESS_MASK)
-
-#define WLAN_AHB_ADDR_ERROR_CONTROL_ADDRESS 0x00000608
-#define WLAN_AHB_ADDR_ERROR_CONTROL_OFFSET 0x00000608
-#define WLAN_AHB_ADDR_ERROR_CONTROL_ENABLE_MSB 0
-#define WLAN_AHB_ADDR_ERROR_CONTROL_ENABLE_LSB 0
-#define WLAN_AHB_ADDR_ERROR_CONTROL_ENABLE_MASK 0x00000001
-#define WLAN_AHB_ADDR_ERROR_CONTROL_ENABLE_GET(x) (((x) & WLAN_AHB_ADDR_ERROR_CONTROL_ENABLE_MASK) >> WLAN_AHB_ADDR_ERROR_CONTROL_ENABLE_LSB)
-#define WLAN_AHB_ADDR_ERROR_CONTROL_ENABLE_SET(x) (((x) << WLAN_AHB_ADDR_ERROR_CONTROL_ENABLE_LSB) & WLAN_AHB_ADDR_ERROR_CONTROL_ENABLE_MASK)
-
-#define WLAN_AHB_ADDR_ERROR_STATUS_ADDRESS 0x0000060c
-#define WLAN_AHB_ADDR_ERROR_STATUS_OFFSET 0x0000060c
-#define WLAN_AHB_ADDR_ERROR_STATUS_MAC_MSB 31
-#define WLAN_AHB_ADDR_ERROR_STATUS_MAC_LSB 31
-#define WLAN_AHB_ADDR_ERROR_STATUS_MAC_MASK 0x80000000
-#define WLAN_AHB_ADDR_ERROR_STATUS_MAC_GET(x) (((x) & WLAN_AHB_ADDR_ERROR_STATUS_MAC_MASK) >> WLAN_AHB_ADDR_ERROR_STATUS_MAC_LSB)
-#define WLAN_AHB_ADDR_ERROR_STATUS_MAC_SET(x) (((x) << WLAN_AHB_ADDR_ERROR_STATUS_MAC_LSB) & WLAN_AHB_ADDR_ERROR_STATUS_MAC_MASK)
-#define WLAN_AHB_ADDR_ERROR_STATUS_MBOX_MSB 30
-#define WLAN_AHB_ADDR_ERROR_STATUS_MBOX_LSB 30
-#define WLAN_AHB_ADDR_ERROR_STATUS_MBOX_MASK 0x40000000
-#define WLAN_AHB_ADDR_ERROR_STATUS_MBOX_GET(x) (((x) & WLAN_AHB_ADDR_ERROR_STATUS_MBOX_MASK) >> WLAN_AHB_ADDR_ERROR_STATUS_MBOX_LSB)
-#define WLAN_AHB_ADDR_ERROR_STATUS_MBOX_SET(x) (((x) << WLAN_AHB_ADDR_ERROR_STATUS_MBOX_LSB) & WLAN_AHB_ADDR_ERROR_STATUS_MBOX_MASK)
-#define WLAN_AHB_ADDR_ERROR_STATUS_ADDRESS_MSB 23
-#define WLAN_AHB_ADDR_ERROR_STATUS_ADDRESS_LSB 0
-#define WLAN_AHB_ADDR_ERROR_STATUS_ADDRESS_MASK 0x00ffffff
-#define WLAN_AHB_ADDR_ERROR_STATUS_ADDRESS_GET(x) (((x) & WLAN_AHB_ADDR_ERROR_STATUS_ADDRESS_MASK) >> WLAN_AHB_ADDR_ERROR_STATUS_ADDRESS_LSB)
-#define WLAN_AHB_ADDR_ERROR_STATUS_ADDRESS_SET(x) (((x) << WLAN_AHB_ADDR_ERROR_STATUS_ADDRESS_LSB) & WLAN_AHB_ADDR_ERROR_STATUS_ADDRESS_MASK)
-
-#define WLAN_BCAM_CONFLICT_ERROR_ADDRESS 0x00000610
-#define WLAN_BCAM_CONFLICT_ERROR_OFFSET 0x00000610
-#define WLAN_BCAM_CONFLICT_ERROR_IPORT_FLAG_MSB 1
-#define WLAN_BCAM_CONFLICT_ERROR_IPORT_FLAG_LSB 1
-#define WLAN_BCAM_CONFLICT_ERROR_IPORT_FLAG_MASK 0x00000002
-#define WLAN_BCAM_CONFLICT_ERROR_IPORT_FLAG_GET(x) (((x) & WLAN_BCAM_CONFLICT_ERROR_IPORT_FLAG_MASK) >> WLAN_BCAM_CONFLICT_ERROR_IPORT_FLAG_LSB)
-#define WLAN_BCAM_CONFLICT_ERROR_IPORT_FLAG_SET(x) (((x) << WLAN_BCAM_CONFLICT_ERROR_IPORT_FLAG_LSB) & WLAN_BCAM_CONFLICT_ERROR_IPORT_FLAG_MASK)
-#define WLAN_BCAM_CONFLICT_ERROR_DPORT_FLAG_MSB 0
-#define WLAN_BCAM_CONFLICT_ERROR_DPORT_FLAG_LSB 0
-#define WLAN_BCAM_CONFLICT_ERROR_DPORT_FLAG_MASK 0x00000001
-#define WLAN_BCAM_CONFLICT_ERROR_DPORT_FLAG_GET(x) (((x) & WLAN_BCAM_CONFLICT_ERROR_DPORT_FLAG_MASK) >> WLAN_BCAM_CONFLICT_ERROR_DPORT_FLAG_LSB)
-#define WLAN_BCAM_CONFLICT_ERROR_DPORT_FLAG_SET(x) (((x) << WLAN_BCAM_CONFLICT_ERROR_DPORT_FLAG_LSB) & WLAN_BCAM_CONFLICT_ERROR_DPORT_FLAG_MASK)
-
-#define WLAN_CPU_PERF_CNT_ADDRESS 0x00000614
-#define WLAN_CPU_PERF_CNT_OFFSET 0x00000614
-#define WLAN_CPU_PERF_CNT_EN_MSB 0
-#define WLAN_CPU_PERF_CNT_EN_LSB 0
-#define WLAN_CPU_PERF_CNT_EN_MASK 0x00000001
-#define WLAN_CPU_PERF_CNT_EN_GET(x) (((x) & WLAN_CPU_PERF_CNT_EN_MASK) >> WLAN_CPU_PERF_CNT_EN_LSB)
-#define WLAN_CPU_PERF_CNT_EN_SET(x) (((x) << WLAN_CPU_PERF_CNT_EN_LSB) & WLAN_CPU_PERF_CNT_EN_MASK)
-
-#define WLAN_CPU_INST_FETCH_ADDRESS 0x00000618
-#define WLAN_CPU_INST_FETCH_OFFSET 0x00000618
-#define WLAN_CPU_INST_FETCH_CNT_MSB 31
-#define WLAN_CPU_INST_FETCH_CNT_LSB 0
-#define WLAN_CPU_INST_FETCH_CNT_MASK 0xffffffff
-#define WLAN_CPU_INST_FETCH_CNT_GET(x) (((x) & WLAN_CPU_INST_FETCH_CNT_MASK) >> WLAN_CPU_INST_FETCH_CNT_LSB)
-#define WLAN_CPU_INST_FETCH_CNT_SET(x) (((x) << WLAN_CPU_INST_FETCH_CNT_LSB) & WLAN_CPU_INST_FETCH_CNT_MASK)
-
-#define WLAN_CPU_DATA_FETCH_ADDRESS 0x0000061c
-#define WLAN_CPU_DATA_FETCH_OFFSET 0x0000061c
-#define WLAN_CPU_DATA_FETCH_CNT_MSB 31
-#define WLAN_CPU_DATA_FETCH_CNT_LSB 0
-#define WLAN_CPU_DATA_FETCH_CNT_MASK 0xffffffff
-#define WLAN_CPU_DATA_FETCH_CNT_GET(x) (((x) & WLAN_CPU_DATA_FETCH_CNT_MASK) >> WLAN_CPU_DATA_FETCH_CNT_LSB)
-#define WLAN_CPU_DATA_FETCH_CNT_SET(x) (((x) << WLAN_CPU_DATA_FETCH_CNT_LSB) & WLAN_CPU_DATA_FETCH_CNT_MASK)
-
-#define WLAN_CPU_RAM1_CONFLICT_ADDRESS 0x00000620
-#define WLAN_CPU_RAM1_CONFLICT_OFFSET 0x00000620
-#define WLAN_CPU_RAM1_CONFLICT_CNT_MSB 11
-#define WLAN_CPU_RAM1_CONFLICT_CNT_LSB 0
-#define WLAN_CPU_RAM1_CONFLICT_CNT_MASK 0x00000fff
-#define WLAN_CPU_RAM1_CONFLICT_CNT_GET(x) (((x) & WLAN_CPU_RAM1_CONFLICT_CNT_MASK) >> WLAN_CPU_RAM1_CONFLICT_CNT_LSB)
-#define WLAN_CPU_RAM1_CONFLICT_CNT_SET(x) (((x) << WLAN_CPU_RAM1_CONFLICT_CNT_LSB) & WLAN_CPU_RAM1_CONFLICT_CNT_MASK)
-
-#define WLAN_CPU_RAM2_CONFLICT_ADDRESS 0x00000624
-#define WLAN_CPU_RAM2_CONFLICT_OFFSET 0x00000624
-#define WLAN_CPU_RAM2_CONFLICT_CNT_MSB 11
-#define WLAN_CPU_RAM2_CONFLICT_CNT_LSB 0
-#define WLAN_CPU_RAM2_CONFLICT_CNT_MASK 0x00000fff
-#define WLAN_CPU_RAM2_CONFLICT_CNT_GET(x) (((x) & WLAN_CPU_RAM2_CONFLICT_CNT_MASK) >> WLAN_CPU_RAM2_CONFLICT_CNT_LSB)
-#define WLAN_CPU_RAM2_CONFLICT_CNT_SET(x) (((x) << WLAN_CPU_RAM2_CONFLICT_CNT_LSB) & WLAN_CPU_RAM2_CONFLICT_CNT_MASK)
-
-#define WLAN_CPU_RAM3_CONFLICT_ADDRESS 0x00000628
-#define WLAN_CPU_RAM3_CONFLICT_OFFSET 0x00000628
-#define WLAN_CPU_RAM3_CONFLICT_CNT_MSB 11
-#define WLAN_CPU_RAM3_CONFLICT_CNT_LSB 0
-#define WLAN_CPU_RAM3_CONFLICT_CNT_MASK 0x00000fff
-#define WLAN_CPU_RAM3_CONFLICT_CNT_GET(x) (((x) & WLAN_CPU_RAM3_CONFLICT_CNT_MASK) >> WLAN_CPU_RAM3_CONFLICT_CNT_LSB)
-#define WLAN_CPU_RAM3_CONFLICT_CNT_SET(x) (((x) << WLAN_CPU_RAM3_CONFLICT_CNT_LSB) & WLAN_CPU_RAM3_CONFLICT_CNT_MASK)
-
-#define WLAN_CPU_RAM4_CONFLICT_ADDRESS 0x0000062c
-#define WLAN_CPU_RAM4_CONFLICT_OFFSET 0x0000062c
-#define WLAN_CPU_RAM4_CONFLICT_CNT_MSB 11
-#define WLAN_CPU_RAM4_CONFLICT_CNT_LSB 0
-#define WLAN_CPU_RAM4_CONFLICT_CNT_MASK 0x00000fff
-#define WLAN_CPU_RAM4_CONFLICT_CNT_GET(x) (((x) & WLAN_CPU_RAM4_CONFLICT_CNT_MASK) >> WLAN_CPU_RAM4_CONFLICT_CNT_LSB)
-#define WLAN_CPU_RAM4_CONFLICT_CNT_SET(x) (((x) << WLAN_CPU_RAM4_CONFLICT_CNT_LSB) & WLAN_CPU_RAM4_CONFLICT_CNT_MASK)
-
-
-#ifndef __ASSEMBLER__
-
-typedef struct vmc_wlan_reg_reg_s {
- volatile unsigned int wlan_mc_bcam_valid[128];
- volatile unsigned int wlan_mc_bcam_compare[128];
- volatile unsigned int wlan_mc_bcam_target[128];
- volatile unsigned int wlan_apb_addr_error_control;
- volatile unsigned int wlan_apb_addr_error_status;
- volatile unsigned int wlan_ahb_addr_error_control;
- volatile unsigned int wlan_ahb_addr_error_status;
- volatile unsigned int wlan_bcam_conflict_error;
- volatile unsigned int wlan_cpu_perf_cnt;
- volatile unsigned int wlan_cpu_inst_fetch;
- volatile unsigned int wlan_cpu_data_fetch;
- volatile unsigned int wlan_cpu_ram1_conflict;
- volatile unsigned int wlan_cpu_ram2_conflict;
- volatile unsigned int wlan_cpu_ram3_conflict;
- volatile unsigned int wlan_cpu_ram4_conflict;
-} vmc_wlan_reg_reg_t;
-
-#endif /* __ASSEMBLER__ */
-
-#endif /* _VMC_WLAN_REG_H_ */
deleted file mode 100644
@@ -1,682 +0,0 @@
-//-
-// Copyright (c) 2009-2010 Atheros Communications Inc.
-// All rights reserved.
-//
-//
-// Permission to use, copy, modify, and/or distribute this software for any
-// purpose with or without fee is hereby granted, provided that the above
-// copyright notice and this permission notice appear in all copies.
-//
-// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-//
-//
-//
-//
-
-
-#ifndef __A_HCI_H__
-#define __A_HCI_H__
-
-#define HCI_CMD_OGF_MASK 0x3F
-#define HCI_CMD_OGF_SHIFT 10
-#define HCI_CMD_GET_OGF(opcode) ((opcode >> HCI_CMD_OGF_SHIFT) & HCI_CMD_OGF_MASK)
-
-#define HCI_CMD_OCF_MASK 0x3FF
-#define HCI_CMD_OCF_SHIFT 0
-#define HCI_CMD_GET_OCF(opcode) (((opcode) >> HCI_CMD_OCF_SHIFT) & HCI_CMD_OCF_MASK)
-
-#define HCI_FORM_OPCODE(ocf, ogf) ((ocf & HCI_CMD_OCF_MASK) << HCI_CMD_OCF_SHIFT | \
- (ogf & HCI_CMD_OGF_MASK) << HCI_CMD_OGF_SHIFT)
-
-
-/*======== HCI Opcode groups ===============*/
-#define OGF_NOP 0x00
-#define OGF_LINK_CONTROL 0x01
-#define OGF_LINK_POLICY 0x03
-#define OGF_INFO_PARAMS 0x04
-#define OGF_STATUS 0x05
-#define OGF_TESTING 0x06
-#define OGF_BLUETOOTH 0x3E
-#define OGF_VENDOR_DEBUG 0x3F
-
-
-
-#define OCF_NOP 0x00
-
-
-/*===== Link Control Commands Opcode===================*/
-#define OCF_HCI_Create_Physical_Link 0x35
-#define OCF_HCI_Accept_Physical_Link_Req 0x36
-#define OCF_HCI_Disconnect_Physical_Link 0x37
-#define OCF_HCI_Create_Logical_Link 0x38
-#define OCF_HCI_Accept_Logical_Link 0x39
-#define OCF_HCI_Disconnect_Logical_Link 0x3A
-#define OCF_HCI_Logical_Link_Cancel 0x3B
-#define OCF_HCI_Flow_Spec_Modify 0x3C
-
-
-
-/*===== Link Policy Commands Opcode====================*/
-#define OCF_HCI_Set_Event_Mask 0x01
-#define OCF_HCI_Reset 0x03
-#define OCF_HCI_Read_Conn_Accept_Timeout 0x15
-#define OCF_HCI_Write_Conn_Accept_Timeout 0x16
-#define OCF_HCI_Read_Link_Supervision_Timeout 0x36
-#define OCF_HCI_Write_Link_Supervision_Timeout 0x37
-#define OCF_HCI_Enhanced_Flush 0x5F
-#define OCF_HCI_Read_Logical_Link_Accept_Timeout 0x61
-#define OCF_HCI_Write_Logical_Link_Accept_Timeout 0x62
-#define OCF_HCI_Set_Event_Mask_Page_2 0x63
-#define OCF_HCI_Read_Location_Data 0x64
-#define OCF_HCI_Write_Location_Data 0x65
-#define OCF_HCI_Read_Flow_Control_Mode 0x66
-#define OCF_HCI_Write_Flow_Control_Mode 0x67
-#define OCF_HCI_Read_BE_Flush_Timeout 0x69
-#define OCF_HCI_Write_BE_Flush_Timeout 0x6A
-#define OCF_HCI_Short_Range_Mode 0x6B
-
-
-/*======== Info Commands Opcode========================*/
-#define OCF_HCI_Read_Local_Ver_Info 0x01
-#define OCF_HCI_Read_Local_Supported_Cmds 0x02
-#define OCF_HCI_Read_Data_Block_Size 0x0A
-/*======== Status Commands Opcode======================*/
-#define OCF_HCI_Read_Failed_Contact_Counter 0x01
-#define OCF_HCI_Reset_Failed_Contact_Counter 0x02
-#define OCF_HCI_Read_Link_Quality 0x03
-#define OCF_HCI_Read_RSSI 0x05
-#define OCF_HCI_Read_Local_AMP_Info 0x09
-#define OCF_HCI_Read_Local_AMP_ASSOC 0x0A
-#define OCF_HCI_Write_Remote_AMP_ASSOC 0x0B
-
-
-/*======= AMP_ASSOC Specific TLV tags =================*/
-#define AMP_ASSOC_MAC_ADDRESS_INFO_TYPE 0x1
-#define AMP_ASSOC_PREF_CHAN_LIST 0x2
-#define AMP_ASSOC_CONNECTED_CHAN 0x3
-#define AMP_ASSOC_PAL_CAPABILITIES 0x4
-#define AMP_ASSOC_PAL_VERSION 0x5
-
-
-/*========= PAL Events =================================*/
-#define PAL_COMMAND_COMPLETE_EVENT 0x0E
-#define PAL_COMMAND_STATUS_EVENT 0x0F
-#define PAL_HARDWARE_ERROR_EVENT 0x10
-#define PAL_FLUSH_OCCURRED_EVENT 0x11
-#define PAL_LOOPBACK_EVENT 0x19
-#define PAL_BUFFER_OVERFLOW_EVENT 0x1A
-#define PAL_QOS_VIOLATION_EVENT 0x1E
-#define PAL_ENHANCED_FLUSH_COMPLT_EVENT 0x39
-#define PAL_PHYSICAL_LINK_COMPL_EVENT 0x40
-#define PAL_CHANNEL_SELECT_EVENT 0x41
-#define PAL_DISCONNECT_PHYSICAL_LINK_EVENT 0x42
-#define PAL_PHY_LINK_EARLY_LOSS_WARNING_EVENT 0x43
-#define PAL_PHY_LINK_RECOVERY_EVENT 0x44
-#define PAL_LOGICAL_LINK_COMPL_EVENT 0x45
-#define PAL_DISCONNECT_LOGICAL_LINK_COMPL_EVENT 0x46
-#define PAL_FLOW_SPEC_MODIFY_COMPL_EVENT 0x47
-#define PAL_NUM_COMPL_DATA_BLOCK_EVENT 0x48
-#define PAL_SHORT_RANGE_MODE_CHANGE_COMPL_EVENT 0x4C
-#define PAL_AMP_STATUS_CHANGE_EVENT 0x4D
-/*======== End of PAL events definition =================*/
-
-
-/*======== Timeouts (not part of HCI cmd, but input to PAL engine) =========*/
-#define Timer_Conn_Accept_TO 0x01
-#define Timer_Link_Supervision_TO 0x02
-
-#define NUM_HCI_COMMAND_PKTS 0x1
-
-
-/*====== NOP Cmd ============================*/
-#define HCI_CMD_NOP HCI_FORM_OPCODE(OCF_NOP, OGF_NOP)
-
-
-/*===== Link Control Commands================*/
-#define HCI_Create_Physical_Link HCI_FORM_OPCODE(OCF_HCI_Create_Physical_Link, OGF_LINK_CONTROL)
-#define HCI_Accept_Physical_Link_Req HCI_FORM_OPCODE(OCF_HCI_Accept_Physical_Link_Req, OGF_LINK_CONTROL)
-#define HCI_Disconnect_Physical_Link HCI_FORM_OPCODE(OCF_HCI_Disconnect_Physical_Link, OGF_LINK_CONTROL)
-#define HCI_Create_Logical_Link HCI_FORM_OPCODE(OCF_HCI_Create_Logical_Link, OGF_LINK_CONTROL)
-#define HCI_Accept_Logical_Link HCI_FORM_OPCODE(OCF_HCI_Accept_Logical_Link, OGF_LINK_CONTROL)
-#define HCI_Disconnect_Logical_Link HCI_FORM_OPCODE(OCF_HCI_Disconnect_Logical_Link, OGF_LINK_CONTROL)
-#define HCI_Logical_Link_Cancel HCI_FORM_OPCODE(OCF_HCI_Logical_Link_Cancel, OGF_LINK_CONTROL)
-#define HCI_Flow_Spec_Modify HCI_FORM_OPCODE(OCF_HCI_Flow_Spec_Modify, OGF_LINK_CONTROL)
-
-
-/*===== Link Policy Commands ================*/
-#define HCI_Set_Event_Mask HCI_FORM_OPCODE(OCF_HCI_Set_Event_Mask, OGF_LINK_POLICY)
-#define HCI_Reset HCI_FORM_OPCODE(OCF_HCI_Reset, OGF_LINK_POLICY)
-#define HCI_Enhanced_Flush HCI_FORM_OPCODE(OCF_HCI_Enhanced_Flush, OGF_LINK_POLICY)
-#define HCI_Read_Conn_Accept_Timeout HCI_FORM_OPCODE(OCF_HCI_Read_Conn_Accept_Timeout, OGF_LINK_POLICY)
-#define HCI_Write_Conn_Accept_Timeout HCI_FORM_OPCODE(OCF_HCI_Write_Conn_Accept_Timeout, OGF_LINK_POLICY)
-#define HCI_Read_Logical_Link_Accept_Timeout HCI_FORM_OPCODE(OCF_HCI_Read_Logical_Link_Accept_Timeout, OGF_LINK_POLICY)
-#define HCI_Write_Logical_Link_Accept_Timeout HCI_FORM_OPCODE(OCF_HCI_Write_Logical_Link_Accept_Timeout, OGF_LINK_POLICY)
-#define HCI_Read_Link_Supervision_Timeout HCI_FORM_OPCODE(OCF_HCI_Read_Link_Supervision_Timeout, OGF_LINK_POLICY)
-#define HCI_Write_Link_Supervision_Timeout HCI_FORM_OPCODE(OCF_HCI_Write_Link_Supervision_Timeout, OGF_LINK_POLICY)
-#define HCI_Read_Location_Data HCI_FORM_OPCODE(OCF_HCI_Read_Location_Data, OGF_LINK_POLICY)
-#define HCI_Write_Location_Data HCI_FORM_OPCODE(OCF_HCI_Write_Location_Data, OGF_LINK_POLICY)
-#define HCI_Set_Event_Mask_Page_2 HCI_FORM_OPCODE(OCF_HCI_Set_Event_Mask_Page_2, OGF_LINK_POLICY)
-#define HCI_Read_Flow_Control_Mode HCI_FORM_OPCODE(OCF_HCI_Read_Flow_Control_Mode, OGF_LINK_POLICY)
-#define HCI_Write_Flow_Control_Mode HCI_FORM_OPCODE(OCF_HCI_Write_Flow_Control_Mode, OGF_LINK_POLICY)
-#define HCI_Write_BE_Flush_Timeout HCI_FORM_OPCODE(OCF_HCI_Write_BE_Flush_Timeout, OGF_LINK_POLICY)
-#define HCI_Read_BE_Flush_Timeout HCI_FORM_OPCODE(OCF_HCI_Read_BE_Flush_Timeout, OGF_LINK_POLICY)
-#define HCI_Short_Range_Mode HCI_FORM_OPCODE(OCF_HCI_Short_Range_Mode, OGF_LINK_POLICY)
-
-
-/*===== Info Commands =====================*/
-#define HCI_Read_Local_Ver_Info HCI_FORM_OPCODE(OCF_HCI_Read_Local_Ver_Info, OGF_INFO_PARAMS)
-#define HCI_Read_Local_Supported_Cmds HCI_FORM_OPCODE(OCF_HCI_Read_Local_Supported_Cmds, OGF_INFO_PARAMS)
-#define HCI_Read_Data_Block_Size HCI_FORM_OPCODE(OCF_HCI_Read_Data_Block_Size, OGF_INFO_PARAMS)
-
-/*===== Status Commands =====================*/
-#define HCI_Read_Link_Quality HCI_FORM_OPCODE(OCF_HCI_Read_Link_Quality, OGF_STATUS)
-#define HCI_Read_RSSI HCI_FORM_OPCODE(OCF_HCI_Read_RSSI, OGF_STATUS)
-#define HCI_Read_Local_AMP_Info HCI_FORM_OPCODE(OCF_HCI_Read_Local_AMP_Info, OGF_STATUS)
-#define HCI_Read_Local_AMP_ASSOC HCI_FORM_OPCODE(OCF_HCI_Read_Local_AMP_ASSOC, OGF_STATUS)
-#define HCI_Write_Remote_AMP_ASSOC HCI_FORM_OPCODE(OCF_HCI_Write_Remote_AMP_ASSOC, OGF_STATUS)
-
-/*====== End of cmd definitions =============*/
-
-
-
-/*===== Timeouts(private - can't come from HCI)=================*/
-#define Conn_Accept_TO HCI_FORM_OPCODE(Timer_Conn_Accept_TO, OGF_VENDOR_DEBUG)
-#define Link_Supervision_TO HCI_FORM_OPCODE(Timer_Link_Supervision_TO, OGF_VENDOR_DEBUG)
-
-/*----- PAL Constants (Sec 6 of Doc)------------------------*/
-#define Max80211_PAL_PDU_Size 1492
-#define Max80211_AMP_ASSOC_Len 672
-#define MinGUserPrio 4
-#define MaxGUserPrio 7
-#define BEUserPrio0 0
-#define BEUserPrio1 3
-#define Max80211BeaconPeriod 2000 /* in millisec */
-#define ShortRangeModePowerMax 4 /* dBm */
-
-/*------ PAL Protocol Identifiers (Sec5.1) ------------------*/
-typedef enum {
- ACL_DATA = 0x01,
- ACTIVITY_REPORT,
- SECURED_FRAMES,
- LINK_SUPERVISION_REQ,
- LINK_SUPERVISION_RESP,
-}PAL_PROTOCOL_IDENTIFIERS;
-
-#define HCI_CMD_HDR_SZ 3
-#define HCI_EVENT_HDR_SIZE 2
-#define MAX_EVT_PKT_SZ 255
-#define AMP_ASSOC_MAX_FRAG_SZ 248
-#define AMP_MAX_GUARANTEED_BW 20000
-
-#define DEFAULT_CONN_ACCPT_TO 5000
-#define DEFAULT_LL_ACCPT_TO 5000
-#define DEFAULT_LSTO 10000
-
-#define PACKET_BASED_FLOW_CONTROL_MODE 0x00
-#define DATA_BLK_BASED_FLOW_CONTROL_MODE 0x01
-
-#define SERVICE_TYPE_BEST_EFFORT 0x01
-#define SERVICE_TYPE_GUARANTEED 0x02
-
-#define MAC_ADDR_LEN 6
-#define LINK_KEY_LEN 32
-
-typedef enum {
- ACL_DATA_PB_1ST_NON_AUTOMATICALLY_FLUSHABLE = 0x00,
- ACL_DATA_PB_CONTINUING_FRAGMENT = 0x01,
- ACL_DATA_PB_1ST_AUTOMATICALLY_FLUSHABLE = 0x02,
- ACL_DATA_PB_COMPLETE_PDU = 0x03,
-} ACL_DATA_PB_FLAGS;
-#define ACL_DATA_PB_FLAGS_SHIFT 12
-
-typedef enum {
- ACL_DATA_BC_POINT_TO_POINT = 0x00,
-} ACL_DATA_BC_FLAGS;
-#define ACL_DATA_BC_FLAGS_SHIFT 14
-
-/* Command pkt */
-typedef struct hci_cmd_pkt_t {
- u16 opcode;
- u8 param_length;
- u8 params[255];
-} POSTPACK HCI_CMD_PKT;
-
-#define ACL_DATA_HDR_SIZE 4 /* hdl_and flags + data_len */
-/* Data pkt */
-typedef struct hci_acl_data_pkt_t {
- u16 hdl_and_flags;
- u16 data_len;
- u8 data[Max80211_PAL_PDU_Size];
-} POSTPACK HCI_ACL_DATA_PKT;
-
-/* Event pkt */
-typedef struct hci_event_pkt_t {
- u8 event_code;
- u8 param_len;
- u8 params[256];
-} POSTPACK HCI_EVENT_PKT;
-
-
-/*============== HCI Command definitions ======================= */
-typedef struct hci_cmd_phy_link_t {
- u16 opcode;
- u8 param_length;
- u8 phy_link_hdl;
- u8 link_key_len;
- u8 link_key_type;
- u8 link_key[LINK_KEY_LEN];
-} POSTPACK HCI_CMD_PHY_LINK;
-
-typedef struct hci_cmd_write_rem_amp_assoc_t {
- u16 opcode;
- u8 param_length;
- u8 phy_link_hdl;
- u16 len_so_far;
- u16 amp_assoc_remaining_len;
- u8 amp_assoc_frag[AMP_ASSOC_MAX_FRAG_SZ];
-} POSTPACK HCI_CMD_WRITE_REM_AMP_ASSOC;
-
-
-typedef struct hci_cmd_opcode_hdl_t {
- u16 opcode;
- u8 param_length;
- u16 hdl;
-} POSTPACK HCI_CMD_READ_LINK_QUAL,
- HCI_CMD_FLUSH,
- HCI_CMD_READ_LINK_SUPERVISION_TIMEOUT;
-
-typedef struct hci_cmd_read_local_amp_assoc_t {
- u16 opcode;
- u8 param_length;
- u8 phy_link_hdl;
- u16 len_so_far;
- u16 max_rem_amp_assoc_len;
-} POSTPACK HCI_CMD_READ_LOCAL_AMP_ASSOC;
-
-
-typedef struct hci_cmd_set_event_mask_t {
- u16 opcode;
- u8 param_length;
- u64 mask;
-}POSTPACK HCI_CMD_SET_EVT_MASK, HCI_CMD_SET_EVT_MASK_PG_2;
-
-
-typedef struct hci_cmd_enhanced_flush_t{
- u16 opcode;
- u8 param_length;
- u16 hdl;
- u8 type;
-} POSTPACK HCI_CMD_ENHANCED_FLUSH;
-
-
-typedef struct hci_cmd_write_timeout_t {
- u16 opcode;
- u8 param_length;
- u16 timeout;
-} POSTPACK HCI_CMD_WRITE_TIMEOUT;
-
-typedef struct hci_cmd_write_link_supervision_timeout_t {
- u16 opcode;
- u8 param_length;
- u16 hdl;
- u16 timeout;
-} POSTPACK HCI_CMD_WRITE_LINK_SUPERVISION_TIMEOUT;
-
-typedef struct hci_cmd_write_flow_control_t {
- u16 opcode;
- u8 param_length;
- u8 mode;
-} POSTPACK HCI_CMD_WRITE_FLOW_CONTROL;
-
-typedef struct location_data_cfg_t {
- u8 reg_domain_aware;
- u8 reg_domain[3];
- u8 reg_options;
-} POSTPACK LOCATION_DATA_CFG;
-
-typedef struct hci_cmd_write_location_data_t {
- u16 opcode;
- u8 param_length;
- LOCATION_DATA_CFG cfg;
-} POSTPACK HCI_CMD_WRITE_LOCATION_DATA;
-
-
-typedef struct flow_spec_t {
- u8 id;
- u8 service_type;
- u16 max_sdu;
- u32 sdu_inter_arrival_time;
- u32 access_latency;
- u32 flush_timeout;
-} POSTPACK FLOW_SPEC;
-
-
-typedef struct hci_cmd_create_logical_link_t {
- u16 opcode;
- u8 param_length;
- u8 phy_link_hdl;
- FLOW_SPEC tx_flow_spec;
- FLOW_SPEC rx_flow_spec;
-} POSTPACK HCI_CMD_CREATE_LOGICAL_LINK;
-
-typedef struct hci_cmd_flow_spec_modify_t {
- u16 opcode;
- u8 param_length;
- u16 hdl;
- FLOW_SPEC tx_flow_spec;
- FLOW_SPEC rx_flow_spec;
-} POSTPACK HCI_CMD_FLOW_SPEC_MODIFY;
-
-typedef struct hci_cmd_logical_link_cancel_t {
- u16 opcode;
- u8 param_length;
- u8 phy_link_hdl;
- u8 tx_flow_spec_id;
-} POSTPACK HCI_CMD_LOGICAL_LINK_CANCEL;
-
-typedef struct hci_cmd_disconnect_logical_link_t {
- u16 opcode;
- u8 param_length;
- u16 logical_link_hdl;
-} POSTPACK HCI_CMD_DISCONNECT_LOGICAL_LINK;
-
-typedef struct hci_cmd_disconnect_phy_link_t {
- u16 opcode;
- u8 param_length;
- u8 phy_link_hdl;
-} POSTPACK HCI_CMD_DISCONNECT_PHY_LINK;
-
-typedef struct hci_cmd_srm_t {
- u16 opcode;
- u8 param_length;
- u8 phy_link_hdl;
- u8 mode;
-} POSTPACK HCI_CMD_SHORT_RANGE_MODE;
-/*============== HCI Command definitions end ======================= */
-
-
-
-/*============== HCI Event definitions ============================= */
-
-/* Command complete event */
-typedef struct hci_event_cmd_complete_t {
- u8 event_code;
- u8 param_len;
- u8 num_hci_cmd_pkts;
- u16 opcode;
- u8 params[255];
-} POSTPACK HCI_EVENT_CMD_COMPLETE;
-
-
-/* Command status event */
-typedef struct hci_event_cmd_status_t {
- u8 event_code;
- u8 param_len;
- u8 status;
- u8 num_hci_cmd_pkts;
- u16 opcode;
-} POSTPACK HCI_EVENT_CMD_STATUS;
-
-/* Hardware Error event */
-typedef struct hci_event_hw_err_t {
- u8 event_code;
- u8 param_len;
- u8 hw_err_code;
-} POSTPACK HCI_EVENT_HW_ERR;
-
-/* Flush occurred event */
-/* Qos Violation event */
-typedef struct hci_event_handle_t {
- u8 event_code;
- u8 param_len;
- u16 handle;
-} POSTPACK HCI_EVENT_FLUSH_OCCRD,
- HCI_EVENT_QOS_VIOLATION;
-
-/* Loopback command event */
-typedef struct hci_loopback_cmd_t {
- u8 event_code;
- u8 param_len;
- u8 params[252];
-} POSTPACK HCI_EVENT_LOOPBACK_CMD;
-
-/* Data buffer overflow event */
-typedef struct hci_data_buf_overflow_t {
- u8 event_code;
- u8 param_len;
- u8 link_type;
-} POSTPACK HCI_EVENT_DATA_BUF_OVERFLOW;
-
-/* Enhanced Flush complete event */
-typedef struct hci_enhanced_flush_complt_t{
- u8 event_code;
- u8 param_len;
- u16 hdl;
-} POSTPACK HCI_EVENT_ENHANCED_FLUSH_COMPLT;
-
-/* Channel select event */
-typedef struct hci_event_chan_select_t {
- u8 event_code;
- u8 param_len;
- u8 phy_link_hdl;
-} POSTPACK HCI_EVENT_CHAN_SELECT;
-
-/* Physical Link Complete event */
-typedef struct hci_event_phy_link_complete_event_t {
- u8 event_code;
- u8 param_len;
- u8 status;
- u8 phy_link_hdl;
-} POSTPACK HCI_EVENT_PHY_LINK_COMPLETE;
-
-/* Logical Link complete event */
-typedef struct hci_event_logical_link_complete_event_t {
- u8 event_code;
- u8 param_len;
- u8 status;
- u16 logical_link_hdl;
- u8 phy_hdl;
- u8 tx_flow_id;
-} POSTPACK HCI_EVENT_LOGICAL_LINK_COMPLETE_EVENT;
-
-/* Disconnect Logical Link complete event */
-typedef struct hci_event_disconnect_logical_link_event_t {
- u8 event_code;
- u8 param_len;
- u8 status;
- u16 logical_link_hdl;
- u8 reason;
-} POSTPACK HCI_EVENT_DISCONNECT_LOGICAL_LINK_EVENT;
-
-/* Disconnect Physical Link complete event */
-typedef struct hci_event_disconnect_phy_link_complete_t {
- u8 event_code;
- u8 param_len;
- u8 status;
- u8 phy_link_hdl;
- u8 reason;
-} POSTPACK HCI_EVENT_DISCONNECT_PHY_LINK_COMPLETE;
-
-typedef struct hci_event_physical_link_loss_early_warning_t{
- u8 event_code;
- u8 param_len;
- u8 phy_hdl;
- u8 reason;
-} POSTPACK HCI_EVENT_PHY_LINK_LOSS_EARLY_WARNING;
-
-typedef struct hci_event_physical_link_recovery_t{
- u8 event_code;
- u8 param_len;
- u8 phy_hdl;
-} POSTPACK HCI_EVENT_PHY_LINK_RECOVERY;
-
-
-/* Flow spec modify complete event */
-/* Flush event */
-typedef struct hci_event_status_handle_t {
- u8 event_code;
- u8 param_len;
- u8 status;
- u16 handle;
-} POSTPACK HCI_EVENT_FLOW_SPEC_MODIFY,
- HCI_EVENT_FLUSH;
-
-
-/* Num of completed data blocks event */
-typedef struct hci_event_num_of_compl_data_blks_t {
- u8 event_code;
- u8 param_len;
- u16 num_data_blks;
- u8 num_handles;
- u8 params[255];
-} POSTPACK HCI_EVENT_NUM_COMPL_DATA_BLKS;
-
-/* Short range mode change complete event */
-typedef struct hci_srm_cmpl_t {
- u8 event_code;
- u8 param_len;
- u8 status;
- u8 phy_link;
- u8 state;
-} POSTPACK HCI_EVENT_SRM_COMPL;
-
-typedef struct hci_event_amp_status_change_t{
- u8 event_code;
- u8 param_len;
- u8 status;
- u8 amp_status;
-} POSTPACK HCI_EVENT_AMP_STATUS_CHANGE;
-
-/*============== Event definitions end =========================== */
-
-
-typedef struct local_amp_info_resp_t {
- u8 status;
- u8 amp_status;
- u32 total_bw; /* kbps */
- u32 max_guranteed_bw; /* kbps */
- u32 min_latency;
- u32 max_pdu_size;
- u8 amp_type;
- u16 pal_capabilities;
- u16 amp_assoc_len;
- u32 max_flush_timeout; /* in ms */
- u32 be_flush_timeout; /* in ms */
-} POSTPACK LOCAL_AMP_INFO;
-
-typedef struct amp_assoc_cmd_resp_t{
- u8 status;
- u8 phy_hdl;
- u16 amp_assoc_len;
- u8 amp_assoc_frag[AMP_ASSOC_MAX_FRAG_SZ];
-}POSTPACK AMP_ASSOC_CMD_RESP;
-
-
-enum PAL_HCI_CMD_STATUS {
- PAL_HCI_CMD_PROCESSED,
- PAL_HCI_CMD_IGNORED
-};
-
-
-/*============= HCI Error Codes =======================*/
-#define HCI_SUCCESS 0x00
-#define HCI_ERR_UNKNOW_CMD 0x01
-#define HCI_ERR_UNKNOWN_CONN_ID 0x02
-#define HCI_ERR_HW_FAILURE 0x03
-#define HCI_ERR_PAGE_TIMEOUT 0x04
-#define HCI_ERR_AUTH_FAILURE 0x05
-#define HCI_ERR_KEY_MISSING 0x06
-#define HCI_ERR_MEM_CAP_EXECED 0x07
-#define HCI_ERR_CON_TIMEOUT 0x08
-#define HCI_ERR_CON_LIMIT_EXECED 0x09
-#define HCI_ERR_ACL_CONN_ALRDY_EXISTS 0x0B
-#define HCI_ERR_COMMAND_DISALLOWED 0x0C
-#define HCI_ERR_CONN_REJ_BY_LIMIT_RES 0x0D
-#define HCI_ERR_CONN_REJ_BY_SEC 0x0E
-#define HCI_ERR_CONN_REJ_BY_BAD_ADDR 0x0F
-#define HCI_ERR_CONN_ACCPT_TIMEOUT 0x10
-#define HCI_ERR_UNSUPPORT_FEATURE 0x11
-#define HCI_ERR_INVALID_HCI_CMD_PARAMS 0x12
-#define HCI_ERR_REMOTE_USER_TERMINATE_CONN 0x13
-#define HCI_ERR_CON_TERM_BY_HOST 0x16
-#define HCI_ERR_UNSPECIFIED_ERROR 0x1F
-#define HCI_ERR_ENCRYPTION_MODE_NOT_SUPPORT 0x25
-#define HCI_ERR_REQUESTED_QOS_NOT_SUPPORT 0x27
-#define HCI_ERR_QOS_UNACCEPTABLE_PARM 0x2C
-#define HCI_ERR_QOS_REJECTED 0x2D
-#define HCI_ERR_CONN_REJ_NO_SUITABLE_CHAN 0x39
-
-/*============= HCI Error Codes End =======================*/
-
-
-/* Following are event return parameters.. part of HCI events
- */
-typedef struct timeout_read_t {
- u8 status;
- u16 timeout;
-}POSTPACK TIMEOUT_INFO;
-
-typedef struct link_supervision_timeout_read_t {
- u8 status;
- u16 hdl;
- u16 timeout;
-}POSTPACK LINK_SUPERVISION_TIMEOUT_INFO;
-
-typedef struct status_hdl_t {
- u8 status;
- u16 hdl;
-}POSTPACK INFO_STATUS_HDL;
-
-typedef struct write_remote_amp_assoc_t{
- u8 status;
- u8 hdl;
-}POSTPACK WRITE_REMOTE_AMP_ASSOC_INFO;
-
-typedef struct read_loc_info_t {
- u8 status;
- LOCATION_DATA_CFG loc;
-}POSTPACK READ_LOC_INFO;
-
-typedef struct read_flow_ctrl_mode_t {
- u8 status;
- u8 mode;
-}POSTPACK READ_FLWCTRL_INFO;
-
-typedef struct read_data_blk_size_t {
- u8 status;
- u16 max_acl_data_pkt_len;
- u16 data_block_len;
- u16 total_num_data_blks;
-}POSTPACK READ_DATA_BLK_SIZE_INFO;
-
-/* Read Link quality info */
-typedef struct link_qual_t {
- u8 status;
- u16 hdl;
- u8 link_qual;
-} POSTPACK READ_LINK_QUAL_INFO,
- READ_RSSI_INFO;
-
-typedef struct ll_cancel_resp_t {
- u8 status;
- u8 phy_link_hdl;
- u8 tx_flow_spec_id;
-} POSTPACK LL_CANCEL_RESP;
-
-typedef struct read_local_ver_info_t {
- u8 status;
- u8 hci_version;
- u16 hci_revision;
- u8 pal_version;
- u16 manf_name;
- u16 pal_sub_ver;
-} POSTPACK READ_LOCAL_VER_INFO;
-
-
-#endif /* __A_HCI_H__ */
deleted file mode 100644
@@ -1,55 +0,0 @@
-//------------------------------------------------------------------------------
-// <copyright file="dset_internal.h" company="Atheros">
-// Copyright (c) 2004-2010 Atheros Corporation. All rights reserved.
-//
-//
-// Permission to use, copy, modify, and/or distribute this software for any
-// purpose with or without fee is hereby granted, provided that the above
-// copyright notice and this permission notice appear in all copies.
-//
-// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-//
-//
-//------------------------------------------------------------------------------
-//==============================================================================
-// Author(s): ="Atheros"
-//==============================================================================
-
-
-#ifndef __DSET_INTERNAL_H__
-#define __DSET_INTERNAL_H__
-
-/*
- * Internal dset definitions, common for DataSet layer.
- */
-
-#define DSET_TYPE_STANDARD 0
-#define DSET_TYPE_BPATCHED 1
-#define DSET_TYPE_COMPRESSED 2
-
-/* Dataset descriptor */
-
-typedef PREPACK struct dset_descriptor_s {
- struct dset_descriptor_s *next; /* List link. NULL only at the last
- descriptor */
- u16 id; /* Dset ID */
- u16 size; /* Dset size. */
- void *DataPtr; /* Pointer to raw data for standard
- DataSet or pointer to original
- dset_descriptor for patched
- DataSet */
- u32 data_type; /* DSET_TYPE_*, above */
-
- void *AuxPtr; /* Additional data that might
- needed for data_type. For
- example, pointer to patch
- Dataset descriptor for BPatch. */
-} POSTPACK dset_descriptor_t;
-
-#endif /* __DSET_INTERNAL_H__ */
deleted file mode 100644
@@ -1,126 +0,0 @@
-//------------------------------------------------------------------------------
-// <copyright file="dsetid.h" company="Atheros">
-// Copyright (c) 2004-2010 Atheros Corporation. All rights reserved.
-//
-//
-// Permission to use, copy, modify, and/or distribute this software for any
-// purpose with or without fee is hereby granted, provided that the above
-// copyright notice and this permission notice appear in all copies.
-//
-// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-//
-//
-//------------------------------------------------------------------------------
-//==============================================================================
-// Author(s): ="Atheros"
-//==============================================================================
-
-
-#ifndef __DSETID_H__
-#define __DSETID_H__
-
-/* Well-known DataSet IDs */
-#define DSETID_UNUSED 0x00000000
-#define DSETID_BOARD_DATA 0x00000001 /* Cal and board data */
-#define DSETID_REGDB 0x00000002 /* Regulatory Database */
-#define DSETID_POWER_CONTROL 0x00000003 /* TX Pwr Lim & Ant Gain */
-#define DSETID_USER_CONFIG 0x00000004 /* User Configuration */
-
-#define DSETID_ANALOG_CONTROL_DATA_START 0x00000005
-#define DSETID_ANALOG_CONTROL_DATA_END 0x00000025
-/*
- * Get DSETID for various reference clock speeds.
- * For each speed there are three DataSets that correspond
- * to the three columns of bank6 data (addr, 11a, 11b/g).
- * This macro returns the dsetid of the first of those
- * three DataSets.
- */
-#define ANALOG_CONTROL_DATA_DSETID(refclk) \
- (DSETID_ANALOG_CONTROL_DATA_START + 3*refclk)
-
-/*
- * There are TWO STARTUP_PATCH DataSets.
- * DSETID_STARTUP_PATCH is historical, and was applied before BMI on
- * earlier systems. On AR6002, it is applied after BMI, just like
- * DSETID_STARTUP_PATCH2.
- */
-#define DSETID_STARTUP_PATCH 0x00000026
-#define DSETID_GPIO_CONFIG_PATCH 0x00000027
-#define DSETID_WLANREGS 0x00000028 /* override wlan regs */
-#define DSETID_STARTUP_PATCH2 0x00000029
-
-#define DSETID_WOW_CONFIG 0x00000090 /* WoW Configuration */
-
-/* Add WHAL_INI_DATA_ID to DSETID_INI_DATA for a specific WHAL INI table. */
-#define DSETID_INI_DATA 0x00000100
-/* Reserved for WHAL INI Tables: 0x100..0x11f */
-#define DSETID_INI_DATA_END 0x0000011f
-
-#define DSETID_VENDOR_START 0x00010000 /* Vendor-defined DataSets */
-
-#define DSETID_INDEX_END 0xfffffffe /* Reserved to indicate the
- end of a memory-based
- DataSet Index */
-#define DSETID_INDEX_FREE 0xffffffff /* An unused index entry */
-
-/*
- * PATCH DataSet format:
- * A list of patches, terminated by a patch with
- * address=PATCH_END.
- *
- * This allows for patches to be stored in flash.
- */
-PREPACK struct patch_s {
- u32 *address;
- u32 data;
-} POSTPACK ;
-
-/*
- * Skip some patches. Can be used to erase a single patch in a
- * patch DataSet without having to re-write the DataSet. May
- * also be used to embed information for use by subsequent
- * patch code. The "data" in a PATCH_SKIP tells how many
- * bytes of length "patch_s" to skip.
- */
-#define PATCH_SKIP ((u32 *)0x00000000)
-
-/*
- * Execute code at the address specified by "data".
- * The address of the patch structure is passed as
- * the one parameter.
- */
-#define PATCH_CODE_ABS ((u32 *)0x00000001)
-
-/*
- * Same as PATCH_CODE_ABS, but treat "data" as an
- * offset from the start of the patch word.
- */
-#define PATCH_CODE_REL ((u32 *)0x00000002)
-
-/* Mark the end of this patch DataSet. */
-#define PATCH_END ((u32 *)0xffffffff)
-
-/*
- * A DataSet which contains a Binary Patch to some other DataSet
- * uses the original dsetid with the DSETID_BPATCH_FLAG bit set.
- * Such a BPatch DataSet consists of BPatch metadata followed by
- * the bdiff bytes. BPatch metadata consists of a single 32-bit
- * word that contains the size of the BPatched final image.
- *
- * To create a suitable bdiff DataSet, use bdiff in host/tools/bdiff
- * to create "diffs":
- * bdiff -q -O -nooldmd5 -nonewmd5 -d ORIGfile NEWfile diffs
- * Then add BPatch metadata to the start of "diffs".
- *
- * NB: There are some implementation-induced restrictions
- * on which DataSets can be BPatched.
- */
-#define DSETID_BPATCH_FLAG 0x80000000
-
-#endif /* __DSETID_H__ */
deleted file mode 100644
@@ -1,237 +0,0 @@
-//------------------------------------------------------------------------------
-// Copyright (c) 2005-2010 Atheros Corporation. All rights reserved.
-//
-//
-// Permission to use, copy, modify, and/or distribute this software for any
-// purpose with or without fee is hereby granted, provided that the above
-// copyright notice and this permission notice appear in all copies.
-//
-// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-//
-//
-//------------------------------------------------------------------------------
-//==============================================================================
-// Author(s): ="Atheros"
-//==============================================================================
-
-#ifndef __REG_DBSCHEMA_H__
-#define __REG_DBSCHEMA_H__
-
-/*
- * This file describes the regulatory DB schema, which is common between the
- * 'generator' and 'parser'. The 'generator' runs on a host(typically a x86
- * Linux) and spits outs two binary files, which follow the DB file
- * format(described below). The resultant output "regulatoryData_AG.bin"
- * is binary file which has information regarding A and G regulatory
- * information, while the "regulatoryData_G.bin" consists of G-ONLY regulatory
- * information. This binary file is parsed in the target for extracting
- * regulatory information.
- *
- * The DB values used to populate the regulatory DB are defined in
- * reg_dbvalues.h
- *
- */
-
-/* Binary data file - Representation of Regulatory DB*/
-#define REG_DATA_FILE_AG "./regulatoryData_AG.bin"
-#define REG_DATA_FILE_G "./regulatoryData_G.bin"
-
-
-/* Table tags used to encode different tables in the database */
-enum data_tags_t{
- REG_DMN_PAIR_MAPPING_TAG = 0,
- REG_COUNTRY_CODE_TO_ENUM_RD_TAG,
- REG_DMN_FREQ_BAND_regDmn5GhzFreq_TAG,
- REG_DMN_FREQ_BAND_regDmn2Ghz11_BG_Freq_TAG,
- REG_DOMAIN_TAG,
- MAX_DB_TABLE_TAGS
- };
-
-
-
-/*
- ****************************************************************************
- * Regulatory DB file format :
- * 4-bytes : "RGDB" (Magic Key)
- * 4-bytes : version (Default is 5379(my extn))
- * 4-bytes : length of file
- * dbType(4)
- * TAG(4)
- * Entries(1)entrySize(1)searchType(1)reserved[3]tableSize(2)"0xdeadbeef"(4)struct_data....
- * TAG(4)
- * Entries(1)entrySize(1)searchType(1)reserved[3]tableSize(2)"0xdeadbeef"(4)struct_data....
- * TAG(4)
- * Entries(1)entrySize(1)searchType(1)reserved[3]tableSize(2)"0xdeadbeef"(4)struct_data....
- * ...
- * ...
- ****************************************************************************
- *
- */
-
-/*
- * Length of the file would be filled in when the file is created and
- * it would include the header size.
- */
-
-#define REG_DB_KEY "RGDB" /* Should be EXACTLY 4-bytes */
-#define REG_DB_VER 7802 /* Between 0-9999 */
-/* REG_DB_VER history in reverse chronological order:
- * 7802: 78 (ASCII code of N) + 02 (minor version number) - updated 10/21/09
- * 7801: 78 (ASCII code of N) + 01 (minor version number, increment on further changes)
- * 1178: '11N' = 11 + ASCII code of N(78)
- * 5379: initial version, no 11N support
- */
-#define MAGIC_KEY_OFFSET 0
-#define VERSION_OFFSET 4
-#define FILE_SZ_OFFSET 8
-#define DB_TYPE_OFFSET 12
-
-#define MAGIC_KEY_SZ 4
-#define VERSION_SZ 4
-#define FILE_SZ_SZ 4
-#define DB_TYPE_SZ 4
-#define DB_TAG_SZ 4
-
-#define REGDB_GET_MAGICKEY(x) ((char *)x + MAGIC_KEY_OFFSET)
-#define REGDB_GET_VERSION(x) ((char *)x + VERSION_OFFSET)
-#define REGDB_GET_FILESIZE(x) *((unsigned int *)((char *)x + FILE_SZ_OFFSET))
-#define REGDB_GET_DBTYPE(x) *((char *)x + DB_TYPE_OFFSET)
-
-#define REGDB_SET_FILESIZE(x, sz_) *((unsigned int *)((char *)x + FILE_SZ_OFFSET)) = (sz_)
-#define REGDB_IS_EOF(cur, begin) ( REGDB_GET_FILESIZE(begin) > ((cur) - (begin)) )
-
-
-/* A Table can be search based on key as a parameter or accessed directly
- * by giving its index in to the table.
- */
-enum searchType {
- KEY_BASED_TABLE_SEARCH = 1,
- INDEX_BASED_TABLE_ACCESS
- };
-
-
-/* Data is organised as different tables. There is a Master table, which
- * holds information regarding all the tables. It does not have any
- * knowledge about the attributes of the table it is holding
- * but has external view of the same(for ex, how many entries, record size,
- * how to search the table, total table size and reference to the data
- * instance of table).
- */
-typedef PREPACK struct dbMasterTable_t { /* Hold ptrs to Table data structures */
- u8 numOfEntries;
- char entrySize; /* Entry size per table row */
- char searchType; /* Index based access or key based */
- char reserved[3]; /* for alignment */
- u16 tableSize; /* Size of this table */
- char *dataPtr; /* Ptr to the actual Table */
-} POSTPACK dbMasterTable; /* Master table - table of tables */
-
-
-/* used to get the number of rows in a table */
-#define REGDB_NUM_OF_ROWS(a) (sizeof (a) / sizeof (a[0]))
-
-/*
- * Used to set the RegDomain bitmask which chooses which frequency
- * band specs are used.
- */
-
-#define BMLEN 2 /* Use 2 32-bit uint for channel bitmask */
-#define BMZERO {0,0} /* BMLEN zeros */
-
-#define BM(_fa, _fb, _fc, _fd, _fe, _ff, _fg, _fh) \
- {((((_fa >= 0) && (_fa < 32)) ? (((u32) 1) << _fa) : 0) | \
- (((_fb >= 0) && (_fb < 32)) ? (((u32) 1) << _fb) : 0) | \
- (((_fc >= 0) && (_fc < 32)) ? (((u32) 1) << _fc) : 0) | \
- (((_fd >= 0) && (_fd < 32)) ? (((u32) 1) << _fd) : 0) | \
- (((_fe >= 0) && (_fe < 32)) ? (((u32) 1) << _fe) : 0) | \
- (((_ff >= 0) && (_ff < 32)) ? (((u32) 1) << _ff) : 0) | \
- (((_fg >= 0) && (_fg < 32)) ? (((u32) 1) << _fg) : 0) | \
- (((_fh >= 0) && (_fh < 32)) ? (((u32) 1) << _fh) : 0)), \
- ((((_fa > 31) && (_fa < 64)) ? (((u32) 1) << (_fa - 32)) : 0) | \
- (((_fb > 31) && (_fb < 64)) ? (((u32) 1) << (_fb - 32)) : 0) | \
- (((_fc > 31) && (_fc < 64)) ? (((u32) 1) << (_fc - 32)) : 0) | \
- (((_fd > 31) && (_fd < 64)) ? (((u32) 1) << (_fd - 32)) : 0) | \
- (((_fe > 31) && (_fe < 64)) ? (((u32) 1) << (_fe - 32)) : 0) | \
- (((_ff > 31) && (_ff < 64)) ? (((u32) 1) << (_ff - 32)) : 0) | \
- (((_fg > 31) && (_fg < 64)) ? (((u32) 1) << (_fg - 32)) : 0) | \
- (((_fh > 31) && (_fh < 64)) ? (((u32) 1) << (_fh - 32)) : 0))}
-
-
-/*
- * THE following table is the mapping of regdomain pairs specified by
- * a regdomain value to the individual unitary reg domains
- */
-
-typedef PREPACK struct reg_dmn_pair_mapping {
- u16 regDmnEnum; /* 16 bit reg domain pair */
- u16 regDmn5GHz; /* 5GHz reg domain */
- u16 regDmn2GHz; /* 2GHz reg domain */
- u8 flags5GHz; /* Requirements flags (AdHoc disallow etc) */
- u8 flags2GHz; /* Requirements flags (AdHoc disallow etc) */
- u32 pscanMask; /* Passive Scan flags which can override unitary domain passive scan
- flags. This value is used as a mask on the unitary flags*/
-} POSTPACK REG_DMN_PAIR_MAPPING;
-
-#define OFDM_YES (1 << 0)
-#define OFDM_NO (0 << 0)
-#define MCS_HT20_YES (1 << 1)
-#define MCS_HT20_NO (0 << 1)
-#define MCS_HT40_A_YES (1 << 2)
-#define MCS_HT40_A_NO (0 << 2)
-#define MCS_HT40_G_YES (1 << 3)
-#define MCS_HT40_G_NO (0 << 3)
-
-typedef PREPACK struct {
- u16 countryCode;
- u16 regDmnEnum;
- char isoName[3];
- char allowMode; /* what mode is allowed - bit 0: OFDM; bit 1: MCS_HT20; bit 2: MCS_HT40_A; bit 3: MCS_HT40_G */
-} POSTPACK COUNTRY_CODE_TO_ENUM_RD;
-
-/* lower 16 bits of ht40ChanMask */
-#define NO_FREQ_HT40 0x0 /* no freq is HT40 capable */
-#define F1_TO_F4_HT40 0xF /* freq 1 to 4 in the block is ht40 capable */
-#define F2_TO_F3_HT40 0x6 /* freq 2 to 3 in the block is ht40 capable */
-#define F1_TO_F10_HT40 0x3FF /* freq 1 to 10 in the block is ht40 capable */
-#define F3_TO_F11_HT40 0x7FC /* freq 3 to 11 in the block is ht40 capable */
-#define F3_TO_F9_HT40 0x1FC /* freq 3 to 9 in the block is ht40 capable */
-#define F1_TO_F8_HT40 0xFF /* freq 1 to 8 in the block is ht40 capable */
-#define F1_TO_F4_F9_TO_F10_HT40 0x30F /* freq 1 to 4, 9 to 10 in the block is ht40 capable */
-
-/* upper 16 bits of ht40ChanMask */
-#define FREQ_HALF_RATE 0x10000
-#define FREQ_QUARTER_RATE 0x20000
-
-typedef PREPACK struct RegDmnFreqBand {
- u16 lowChannel; /* Low channel center in MHz */
- u16 highChannel; /* High Channel center in MHz */
- u8 power; /* Max power (dBm) for channel range */
- u8 channelSep; /* Channel separation within the band */
- u8 useDfs; /* Use DFS in the RegDomain if corresponding bit is set */
- u8 mode; /* Mode of operation */
- u32 usePassScan; /* Use Passive Scan in the RegDomain if corresponding bit is set */
- u32 ht40ChanMask; /* lower 16 bits: indicate which frequencies in the block is HT40 capable
- upper 16 bits: what rate (half/quarter) the channel is */
-} POSTPACK REG_DMN_FREQ_BAND;
-
-
-
-typedef PREPACK struct regDomain {
- u16 regDmnEnum; /* value from EnumRd table */
- u8 rdCTL;
- u8 maxAntGain;
- u8 dfsMask; /* DFS bitmask for 5Ghz tables */
- u8 flags; /* Requirement flags (AdHoc disallow etc) */
- u16 reserved; /* for alignment */
- u32 pscan; /* Bitmask for passive scan */
- u32 chan11a[BMLEN]; /* 64 bit bitmask for channel/band selection */
- u32 chan11bg[BMLEN];/* 64 bit bitmask for channel/band selection */
-} POSTPACK REG_DOMAIN;
-
-#endif /* __REG_DBSCHEMA_H__ */
deleted file mode 100644
@@ -1,504 +0,0 @@
-//------------------------------------------------------------------------------
-// Copyright (c) 2005-2010 Atheros Corporation. All rights reserved.
-//
-//
-// Permission to use, copy, modify, and/or distribute this software for any
-// purpose with or without fee is hereby granted, provided that the above
-// copyright notice and this permission notice appear in all copies.
-//
-// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-//
-//
-//------------------------------------------------------------------------------
-//==============================================================================
-// Author(s): ="Atheros"
-//==============================================================================
-
-
-#ifndef __REG_DBVALUE_H__
-#define __REG_DBVALUE_H__
-
-/*
- * Numbering from ISO 3166
- */
-enum CountryCode {
- CTRY_ALBANIA = 8, /* Albania */
- CTRY_ALGERIA = 12, /* Algeria */
- CTRY_ARGENTINA = 32, /* Argentina */
- CTRY_ARMENIA = 51, /* Armenia */
- CTRY_ARUBA = 533, /* Aruba */
- CTRY_AUSTRALIA = 36, /* Australia (for STA) */
- CTRY_AUSTRALIA_AP = 5000, /* Australia (for AP) */
- CTRY_AUSTRIA = 40, /* Austria */
- CTRY_AZERBAIJAN = 31, /* Azerbaijan */
- CTRY_BAHRAIN = 48, /* Bahrain */
- CTRY_BANGLADESH = 50, /* Bangladesh */
- CTRY_BARBADOS = 52, /* Barbados */
- CTRY_BELARUS = 112, /* Belarus */
- CTRY_BELGIUM = 56, /* Belgium */
- CTRY_BELIZE = 84, /* Belize */
- CTRY_BOLIVIA = 68, /* Bolivia */
- CTRY_BOSNIA_HERZEGOWANIA = 70, /* Bosnia & Herzegowania */
- CTRY_BRAZIL = 76, /* Brazil */
- CTRY_BRUNEI_DARUSSALAM = 96, /* Brunei Darussalam */
- CTRY_BULGARIA = 100, /* Bulgaria */
- CTRY_CAMBODIA = 116, /* Cambodia */
- CTRY_CANADA = 124, /* Canada (for STA) */
- CTRY_CANADA_AP = 5001, /* Canada (for AP) */
- CTRY_CHILE = 152, /* Chile */
- CTRY_CHINA = 156, /* People's Republic of China */
- CTRY_COLOMBIA = 170, /* Colombia */
- CTRY_COSTA_RICA = 188, /* Costa Rica */
- CTRY_CROATIA = 191, /* Croatia */
- CTRY_CYPRUS = 196,
- CTRY_CZECH = 203, /* Czech Republic */
- CTRY_DENMARK = 208, /* Denmark */
- CTRY_DOMINICAN_REPUBLIC = 214, /* Dominican Republic */
- CTRY_ECUADOR = 218, /* Ecuador */
- CTRY_EGYPT = 818, /* Egypt */
- CTRY_EL_SALVADOR = 222, /* El Salvador */
- CTRY_ESTONIA = 233, /* Estonia */
- CTRY_FAEROE_ISLANDS = 234, /* Faeroe Islands */
- CTRY_FINLAND = 246, /* Finland */
- CTRY_FRANCE = 250, /* France */
- CTRY_FRANCE2 = 255, /* France2 */
- CTRY_GEORGIA = 268, /* Georgia */
- CTRY_GERMANY = 276, /* Germany */
- CTRY_GREECE = 300, /* Greece */
- CTRY_GREENLAND = 304, /* Greenland */
- CTRY_GRENADA = 308, /* Grenada */
- CTRY_GUAM = 316, /* Guam */
- CTRY_GUATEMALA = 320, /* Guatemala */
- CTRY_HAITI = 332, /* Haiti */
- CTRY_HONDURAS = 340, /* Honduras */
- CTRY_HONG_KONG = 344, /* Hong Kong S.A.R., P.R.C. */
- CTRY_HUNGARY = 348, /* Hungary */
- CTRY_ICELAND = 352, /* Iceland */
- CTRY_INDIA = 356, /* India */
- CTRY_INDONESIA = 360, /* Indonesia */
- CTRY_IRAN = 364, /* Iran */
- CTRY_IRAQ = 368, /* Iraq */
- CTRY_IRELAND = 372, /* Ireland */
- CTRY_ISRAEL = 376, /* Israel */
- CTRY_ITALY = 380, /* Italy */
- CTRY_JAMAICA = 388, /* Jamaica */
- CTRY_JAPAN = 392, /* Japan */
- CTRY_JAPAN1 = 393, /* Japan (JP1) */
- CTRY_JAPAN2 = 394, /* Japan (JP0) */
- CTRY_JAPAN3 = 395, /* Japan (JP1-1) */
- CTRY_JAPAN4 = 396, /* Japan (JE1) */
- CTRY_JAPAN5 = 397, /* Japan (JE2) */
- CTRY_JAPAN6 = 399, /* Japan (JP6) */
- CTRY_JORDAN = 400, /* Jordan */
- CTRY_KAZAKHSTAN = 398, /* Kazakhstan */
- CTRY_KENYA = 404, /* Kenya */
- CTRY_KOREA_NORTH = 408, /* North Korea */
- CTRY_KOREA_ROC = 410, /* South Korea (for STA) */
- CTRY_KOREA_ROC2 = 411, /* South Korea */
- CTRY_KOREA_ROC3 = 412, /* South Korea (for AP) */
- CTRY_KUWAIT = 414, /* Kuwait */
- CTRY_LATVIA = 428, /* Latvia */
- CTRY_LEBANON = 422, /* Lebanon */
- CTRY_LIBYA = 434, /* Libya */
- CTRY_LIECHTENSTEIN = 438, /* Liechtenstein */
- CTRY_LITHUANIA = 440, /* Lithuania */
- CTRY_LUXEMBOURG = 442, /* Luxembourg */
- CTRY_MACAU = 446, /* Macau */
- CTRY_MACEDONIA = 807, /* the Former Yugoslav Republic of Macedonia */
- CTRY_MALAYSIA = 458, /* Malaysia */
- CTRY_MALTA = 470, /* Malta */
- CTRY_MEXICO = 484, /* Mexico */
- CTRY_MONACO = 492, /* Principality of Monaco */
- CTRY_MOROCCO = 504, /* Morocco */
- CTRY_NEPAL = 524, /* Nepal */
- CTRY_NETHERLANDS = 528, /* Netherlands */
- CTRY_NETHERLAND_ANTILLES = 530, /* Netherlands-Antilles */
- CTRY_NEW_ZEALAND = 554, /* New Zealand */
- CTRY_NICARAGUA = 558, /* Nicaragua */
- CTRY_NORWAY = 578, /* Norway */
- CTRY_OMAN = 512, /* Oman */
- CTRY_PAKISTAN = 586, /* Islamic Republic of Pakistan */
- CTRY_PANAMA = 591, /* Panama */
- CTRY_PARAGUAY = 600, /* Paraguay */
- CTRY_PERU = 604, /* Peru */
- CTRY_PHILIPPINES = 608, /* Republic of the Philippines */
- CTRY_POLAND = 616, /* Poland */
- CTRY_PORTUGAL = 620, /* Portugal */
- CTRY_PUERTO_RICO = 630, /* Puerto Rico */
- CTRY_QATAR = 634, /* Qatar */
- CTRY_ROMANIA = 642, /* Romania */
- CTRY_RUSSIA = 643, /* Russia */
- CTRY_SAUDI_ARABIA = 682, /* Saudi Arabia */
- CTRY_MONTENEGRO = 891, /* Montenegro */
- CTRY_SINGAPORE = 702, /* Singapore */
- CTRY_SLOVAKIA = 703, /* Slovak Republic */
- CTRY_SLOVENIA = 705, /* Slovenia */
- CTRY_SOUTH_AFRICA = 710, /* South Africa */
- CTRY_SPAIN = 724, /* Spain */
- CTRY_SRILANKA = 144, /* Sri Lanka */
- CTRY_SWEDEN = 752, /* Sweden */
- CTRY_SWITZERLAND = 756, /* Switzerland */
- CTRY_SYRIA = 760, /* Syria */
- CTRY_TAIWAN = 158, /* Taiwan */
- CTRY_THAILAND = 764, /* Thailand */
- CTRY_TRINIDAD_Y_TOBAGO = 780, /* Trinidad y Tobago */
- CTRY_TUNISIA = 788, /* Tunisia */
- CTRY_TURKEY = 792, /* Turkey */
- CTRY_UAE = 784, /* U.A.E. */
- CTRY_UKRAINE = 804, /* Ukraine */
- CTRY_UNITED_KINGDOM = 826, /* United Kingdom */
- CTRY_UNITED_STATES = 840, /* United States (for STA) */
- CTRY_UNITED_STATES_AP = 841, /* United States (for AP) */
- CTRY_UNITED_STATES_PS = 842, /* United States - public safety */
- CTRY_URUGUAY = 858, /* Uruguay */
- CTRY_UZBEKISTAN = 860, /* Uzbekistan */
- CTRY_VENEZUELA = 862, /* Venezuela */
- CTRY_VIET_NAM = 704, /* Viet Nam */
- CTRY_YEMEN = 887, /* Yemen */
- CTRY_ZIMBABWE = 716 /* Zimbabwe */
-};
-
-#define CTRY_DEBUG 0
-#define CTRY_DEFAULT 0x1ff
-
-/*
- * The following regulatory domain definitions are
- * found in the EEPROM. Each regulatory domain
- * can operate in either a 5GHz or 2.4GHz wireless mode or
- * both 5GHz and 2.4GHz wireless modes.
- * In general, the value holds no special
- * meaning and is used to decode into either specific
- * 2.4GHz or 5GHz wireless mode for that particular
- * regulatory domain.
- *
- * Enumerated Regulatory Domain Information 8 bit values indicate that
- * the regdomain is really a pair of unitary regdomains. 12 bit values
- * are the real unitary regdomains and are the only ones which have the
- * frequency bitmasks and flags set.
- */
-
-enum EnumRd {
- NO_ENUMRD = 0x00,
- NULL1_WORLD = 0x03, /* For 11b-only countries (no 11a allowed) */
- NULL1_ETSIB = 0x07, /* Israel */
- NULL1_ETSIC = 0x08,
-
- FCC1_FCCA = 0x10, /* USA */
- FCC1_WORLD = 0x11, /* Hong Kong */
- FCC2_FCCA = 0x20, /* Canada */
- FCC2_WORLD = 0x21, /* Australia & HK */
- FCC2_ETSIC = 0x22,
- FCC3_FCCA = 0x3A, /* USA & Canada w/5470 band, 11h, DFS enabled */
- FCC3_WORLD = 0x3B, /* USA & Canada w/5470 band, 11h, DFS enabled */
- FCC4_FCCA = 0x12, /* FCC public safety plus UNII bands */
- FCC5_FCCA = 0x13, /* US with no DFS */
- FCC5_WORLD = 0x16, /* US with no DFS */
- FCC6_FCCA = 0x14, /* Same as FCC2_FCCA but with 5600-5650MHz channels disabled for US & Canada APs */
- FCC6_WORLD = 0x23, /* Same as FCC2_FCCA but with 5600-5650MHz channels disabled for Australia APs */
-
- ETSI1_WORLD = 0x37,
-
- ETSI2_WORLD = 0x35, /* Hungary & others */
- ETSI3_WORLD = 0x36, /* France & others */
- ETSI4_WORLD = 0x30,
- ETSI4_ETSIC = 0x38,
- ETSI5_WORLD = 0x39,
- ETSI6_WORLD = 0x34, /* Bulgaria */
- ETSI_RESERVED = 0x33, /* Reserved (Do not used) */
- FRANCE_RES = 0x31, /* Legacy France for OEM */
-
- APL6_WORLD = 0x5B, /* Singapore */
- APL4_WORLD = 0x42, /* Singapore */
- APL3_FCCA = 0x50,
- APL_RESERVED = 0x44, /* Reserved (Do not used) */
- APL2_WORLD = 0x45, /* Korea */
- APL2_APLC = 0x46,
- APL3_WORLD = 0x47,
- APL2_APLD = 0x49, /* Korea with 2.3G channels */
- APL2_FCCA = 0x4D, /* Specific Mobile Customer */
- APL1_WORLD = 0x52, /* Latin America */
- APL1_FCCA = 0x53,
- APL1_ETSIC = 0x55,
- APL2_ETSIC = 0x56, /* Venezuela */
- APL5_WORLD = 0x58, /* Chile */
- APL7_FCCA = 0x5C,
- APL8_WORLD = 0x5D,
- APL9_WORLD = 0x5E,
- APL10_WORLD = 0x5F, /* Korea 5GHz for STA */
-
-
- MKK5_MKKA = 0x99, /* This is a temporary value. MG and DQ have to give official one */
- MKK5_FCCA = 0x9A, /* This is a temporary value. MG and DQ have to give official one */
- MKK5_MKKC = 0x88,
- MKK11_MKKA = 0xD4,
- MKK11_FCCA = 0xD5,
- MKK11_MKKC = 0xD7,
-
- /*
- * World mode SKUs
- */
- WOR0_WORLD = 0x60, /* World0 (WO0 SKU) */
- WOR1_WORLD = 0x61, /* World1 (WO1 SKU) */
- WOR2_WORLD = 0x62, /* World2 (WO2 SKU) */
- WOR3_WORLD = 0x63, /* World3 (WO3 SKU) */
- WOR4_WORLD = 0x64, /* World4 (WO4 SKU) */
- WOR5_ETSIC = 0x65, /* World5 (WO5 SKU) */
-
- WOR01_WORLD = 0x66, /* World0-1 (WW0-1 SKU) */
- WOR02_WORLD = 0x67, /* World0-2 (WW0-2 SKU) */
- EU1_WORLD = 0x68, /* Same as World0-2 (WW0-2 SKU), except active scan ch1-13. No ch14 */
-
- WOR9_WORLD = 0x69, /* World9 (WO9 SKU) */
- WORA_WORLD = 0x6A, /* WorldA (WOA SKU) */
- WORB_WORLD = 0x6B, /* WorldB (WOA SKU) */
- WORC_WORLD = 0x6C, /* WorldC (WOA SKU) */
-
- /*
- * Regulator domains ending in a number (e.g. APL1,
- * MK1, ETSI4, etc) apply to 5GHz channel and power
- * information. Regulator domains ending in a letter
- * (e.g. APLA, FCCA, etc) apply to 2.4GHz channel and
- * power information.
- */
- APL1 = 0x0150, /* LAT & Asia */
- APL2 = 0x0250, /* LAT & Asia */
- APL3 = 0x0350, /* Taiwan */
- APL4 = 0x0450, /* Jordan */
- APL5 = 0x0550, /* Chile */
- APL6 = 0x0650, /* Singapore */
- APL7 = 0x0750, /* Taiwan */
- APL8 = 0x0850, /* Malaysia */
- APL9 = 0x0950, /* Korea */
- APL10 = 0x1050, /* Korea 5GHz */
-
- ETSI1 = 0x0130, /* Europe & others */
- ETSI2 = 0x0230, /* Europe & others */
- ETSI3 = 0x0330, /* Europe & others */
- ETSI4 = 0x0430, /* Europe & others */
- ETSI5 = 0x0530, /* Europe & others */
- ETSI6 = 0x0630, /* Europe & others */
- ETSIB = 0x0B30, /* Israel */
- ETSIC = 0x0C30, /* Latin America */
-
- FCC1 = 0x0110, /* US & others */
- FCC2 = 0x0120, /* Canada, Australia & New Zealand */
- FCC3 = 0x0160, /* US w/new middle band & DFS */
- FCC4 = 0x0165,
- FCC5 = 0x0180,
- FCC6 = 0x0610,
- FCCA = 0x0A10,
-
- APLD = 0x0D50, /* South Korea */
-
- MKK1 = 0x0140, /* Japan */
- MKK2 = 0x0240, /* Japan Extended */
- MKK3 = 0x0340, /* Japan new 5GHz */
- MKK4 = 0x0440, /* Japan new 5GHz */
- MKK5 = 0x0540, /* Japan new 5GHz */
- MKK6 = 0x0640, /* Japan new 5GHz */
- MKK7 = 0x0740, /* Japan new 5GHz */
- MKK8 = 0x0840, /* Japan new 5GHz */
- MKK9 = 0x0940, /* Japan new 5GHz */
- MKK10 = 0x1040, /* Japan new 5GHz */
- MKK11 = 0x1140, /* Japan new 5GHz */
- MKK12 = 0x1240, /* Japan new 5GHz */
-
- MKKA = 0x0A40, /* Japan */
- MKKC = 0x0A50,
-
- NULL1 = 0x0198,
- WORLD = 0x0199,
- DEBUG_REG_DMN = 0x01ff,
- UNINIT_REG_DMN = 0x0fff,
-};
-
-enum { /* conformance test limits */
- FCC = 0x10,
- MKK = 0x40,
- ETSI = 0x30,
- NO_CTL = 0xff,
- CTL_11B = 1,
- CTL_11G = 2
-};
-
-
-/*
- * The following are flags for different requirements per reg domain.
- * These requirements are either inhereted from the reg domain pair or
- * from the unitary reg domain if the reg domain pair flags value is
- * 0
- */
-
-enum {
- NO_REQ = 0x00,
- DISALLOW_ADHOC_11A = 0x01,
- ADHOC_PER_11D = 0x02,
- ADHOC_NO_11A = 0x04,
- DISALLOW_ADHOC_11G = 0x08
-};
-
-
-
-
-/*
- * The following describe the bit masks for different passive scan
- * capability/requirements per regdomain.
- */
-#define NO_PSCAN 0x00000000
-#define PSCAN_FCC 0x00000001
-#define PSCAN_ETSI 0x00000002
-#define PSCAN_MKK 0x00000004
-#define PSCAN_ETSIB 0x00000008
-#define PSCAN_ETSIC 0x00000010
-#define PSCAN_WWR 0x00000020
-#define PSCAN_DEFER 0xFFFFFFFF
-
-/* Bit masks for DFS per regdomain */
-
-enum {
- NO_DFS = 0x00,
- DFS_FCC3 = 0x01,
- DFS_ETSI = 0x02,
- DFS_MKK = 0x04
-};
-
-
-#define DEF_REGDMN FCC1_FCCA
-
-/*
- * The following table is the master list for all different freqeuncy
- * bands with the complete matrix of all possible flags and settings
- * for each band if it is used in ANY reg domain.
- *
- * The table of frequency bands is indexed by a bitmask. The ordering
- * must be consistent with the enum below. When adding a new
- * frequency band, be sure to match the location in the enum with the
- * comments
- */
-
-/*
- * These frequency values are as per channel tags and regulatory domain
- * info. Please update them as database is updated.
- */
-#define A_FREQ_MIN 4920
-#define A_FREQ_MAX 5825
-
-#define A_CHAN0_FREQ 5000
-#define A_CHAN_MAX ((A_FREQ_MAX - A_CHAN0_FREQ)/5)
-
-#define BG_FREQ_MIN 2412
-#define BG_FREQ_MAX 2484
-
-#define BG_CHAN0_FREQ 2407
-#define BG_CHAN_MIN ((BG_FREQ_MIN - BG_CHAN0_FREQ)/5)
-#define BG_CHAN_MAX 14 /* corresponding to 2484 MHz */
-
-#define A_20MHZ_BAND_FREQ_MAX 5000
-
-
-/*
- * 5GHz 11A channel tags
- */
-
-enum {
- F1_4920_4980,
- F1_5040_5080,
-
- F1_5120_5240,
-
- F1_5180_5240,
- F2_5180_5240,
- F3_5180_5240,
- F4_5180_5240,
- F5_5180_5240,
- F6_5180_5240,
- F7_5180_5240,
-
- F1_5260_5280,
-
- F1_5260_5320,
- F2_5260_5320,
- F3_5260_5320,
- F4_5260_5320,
- F5_5260_5320,
- F6_5260_5320,
-
- F1_5260_5700,
-
- F1_5280_5320,
-
- F1_5500_5620,
-
- F1_5500_5700,
- F2_5500_5700,
- F3_5500_5700,
- F4_5500_5700,
- F5_5500_5700,
- F6_5500_5700,
- F7_5500_5700,
-
- F1_5745_5805,
- F2_5745_5805,
-
- F1_5745_5825,
- F2_5745_5825,
- F3_5745_5825,
- F4_5745_5825,
- F5_5745_5825,
- F6_5745_5825,
-
- W1_4920_4980,
- W1_5040_5080,
- W1_5170_5230,
- W1_5180_5240,
- W1_5260_5320,
- W1_5745_5825,
- W1_5500_5700,
-};
-
-
-/* 2.4 GHz table - for 11b and 11g info */
-enum {
- BG1_2312_2372,
- BG2_2312_2372,
-
- BG1_2412_2472,
- BG2_2412_2472,
- BG3_2412_2472,
- BG4_2412_2472,
-
- BG1_2412_2462,
- BG2_2412_2462,
-
- BG1_2432_2442,
-
- BG1_2457_2472,
-
- BG1_2467_2472,
-
- BG1_2484_2484, /* No G */
- BG2_2484_2484, /* No G */
-
- BG1_2512_2732,
-
- WBG1_2312_2372,
- WBG1_2412_2412,
- WBG1_2417_2432,
- WBG1_2437_2442,
- WBG1_2447_2457,
- WBG1_2462_2462,
- WBG1_2467_2467,
- WBG2_2467_2467,
- WBG1_2472_2472,
- WBG2_2472_2472,
- WBG1_2484_2484, /* No G */
- WBG2_2484_2484, /* No G */
-};
-
-#endif /* __REG_DBVALUE_H__ */
deleted file mode 100644
@@ -1,347 +0,0 @@
-//------------------------------------------------------------------------------
-// <copyright file="wmi_thin.h" company="Atheros">
-// Copyright (c) 2004-2010 Atheros Corporation. All rights reserved.
-//
-//
-// Permission to use, copy, modify, and/or distribute this software for any
-// purpose with or without fee is hereby granted, provided that the above
-// copyright notice and this permission notice appear in all copies.
-//
-// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-//
-//
-//------------------------------------------------------------------------------
-//==============================================================================
-// Author(s): ="Atheros"
-//==============================================================================
-
-/*
- * This file contains the definitions of the WMI protocol specified in the
- * Wireless Module Interface (WMI). It includes definitions of all the
- * commands and events. Commands are messages from the host to the WM.
- * Events and Replies are messages from the WM to the host.
- *
- * Ownership of correctness in regards to WMI commands
- * belongs to the host driver and the WM is not required to validate
- * parameters for value, proper range, or any other checking.
- *
- */
-
-#ifndef _WMI_THIN_H_
-#define _WMI_THIN_H_
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-typedef enum {
- WMI_THIN_CONFIG_CMDID = 0x8000, // WMI_THIN_RESERVED_START
- WMI_THIN_SET_MIB_CMDID,
- WMI_THIN_GET_MIB_CMDID,
- WMI_THIN_JOIN_CMDID,
- /* add new CMDID's here */
- WMI_THIN_RESERVED_END_CMDID = 0x8fff // WMI_THIN_RESERVED_END
-} WMI_THIN_COMMAND_ID;
-
-typedef enum{
- TEMPLATE_FRM_FIRST = 0,
- TEMPLATE_FRM_PROBE_REQ =TEMPLATE_FRM_FIRST,
- TEMPLATE_FRM_BEACON,
- TEMPLATE_FRM_PROBE_RESP,
- TEMPLATE_FRM_NULL,
- TEMPLATE_FRM_QOS_NULL,
- TEMPLATE_FRM_PSPOLL,
- TEMPLATE_FRM_MAX
-}WMI_TEMPLATE_FRM_TYPE;
-
-/* TEMPLATE_FRM_LEN... represent the maximum allowable
- * data lengths (bytes) for each frame type */
-#define TEMPLATE_FRM_LEN_PROBE_REQ (256) /* Symbian dictates a minimum of 256 for these 3 frame types */
-#define TEMPLATE_FRM_LEN_BEACON (256)
-#define TEMPLATE_FRM_LEN_PROBE_RESP (256)
-#define TEMPLATE_FRM_LEN_NULL (32)
-#define TEMPLATE_FRM_LEN_QOS_NULL (32)
-#define TEMPLATE_FRM_LEN_PSPOLL (32)
-#define TEMPLATE_FRM_LEN_SUM (TEMPLATE_FRM_LEN_PROBE_REQ + TEMPLATE_FRM_LEN_BEACON + TEMPLATE_FRM_LEN_PROBE_RESP + \
- TEMPLATE_FRM_LEN_NULL + TEMPLATE_FRM_LEN_QOS_NULL + TEMPLATE_FRM_LEN_PSPOLL)
-
-
-/* MAC Header Build Rules */
-/* These values allow the host to configure the
- * target code that is responsible for constructing
- * the MAC header. In cases where the MAC header
- * is provided by the host framework, the target
- * has a diminished responsibility over what fields
- * it must write. This will vary from framework to framework.
- * Symbian requires different behavior from MAC80211 which
- * requires different behavior from MS Native Wifi. */
-#define WMI_WRT_VER_TYPE 0x00000001
-#define WMI_WRT_DURATION 0x00000002
-#define WMI_WRT_DIRECTION 0x00000004
-#define WMI_WRT_POWER 0x00000008
-#define WMI_WRT_WEP 0x00000010
-#define WMI_WRT_MORE 0x00000020
-#define WMI_WRT_BSSID 0x00000040
-#define WMI_WRT_QOS 0x00000080
-#define WMI_WRT_SEQNO 0x00000100
-#define WMI_GUARD_TX 0x00000200 /* prevents TX ops that are not allowed for a current state */
-#define WMI_WRT_DEFAULT_CONFIG (WMI_WRT_VER_TYPE | WMI_WRT_DURATION | WMI_WRT_DIRECTION | \
- WMI_WRT_POWER | WMI_WRT_MORE | WMI_WRT_WEP | WMI_WRT_BSSID | \
- WMI_WRT_QOS | WMI_WRT_SEQNO | WMI_GUARD_TX)
-
-/* WMI_THIN_CONFIG_TXCOMPLETE -- Used to configure the params and content for
- * TX Complete messages the will come from the Target. these messages are
- * disabled by default but can be enabled using this structure and the
- * WMI_THIN_CONFIG_CMDID. */
-typedef PREPACK struct {
- u8 version; /* the versioned type of messages to use or 0 to disable */
- u8 countThreshold; /* msg count threshold triggering a tx complete message */
- u16 timeThreshold; /* timeout interval in MSEC triggering a tx complete message */
-} POSTPACK WMI_THIN_CONFIG_TXCOMPLETE;
-
-/* WMI_THIN_CONFIG_DECRYPT_ERR -- Used to configure behavior for received frames
- * that have decryption errors. The default behavior is to discard the frame
- * without notification. Alternately, the MAC Header is forwarded to the host
- * with the failed status. */
-typedef PREPACK struct {
- u8 enable; /* 1 == send decrypt errors to the host, 0 == don't */
- u8 reserved[3]; /* align padding */
-} POSTPACK WMI_THIN_CONFIG_DECRYPT_ERR;
-
-/* WMI_THIN_CONFIG_TX_MAC_RULES -- Used to configure behavior for transmitted
- * frames that require partial MAC header construction. These rules
- * are used by the target to indicate which fields need to be written. */
-typedef PREPACK struct {
- u32 rules; /* combination of WMI_WRT_... values */
-} POSTPACK WMI_THIN_CONFIG_TX_MAC_RULES;
-
-/* WMI_THIN_CONFIG_RX_FILTER_RULES -- Used to configure behavior for received
- * frames as to which frames should get forwarded to the host and which
- * should get processed internally. */
-typedef PREPACK struct {
- u32 rules; /* combination of WMI_FILT_... values */
-} POSTPACK WMI_THIN_CONFIG_RX_FILTER_RULES;
-
-/* WMI_THIN_CONFIG_CMD -- Used to contain some combination of the above
- * WMI_THIN_CONFIG_... structures. The actual combination is indicated
- * by the value of cfgField. Each bit in this field corresponds to
- * one of the above structures. */
-typedef PREPACK struct {
-#define WMI_THIN_CFG_TXCOMP 0x00000001
-#define WMI_THIN_CFG_DECRYPT 0x00000002
-#define WMI_THIN_CFG_MAC_RULES 0x00000004
-#define WMI_THIN_CFG_FILTER_RULES 0x00000008
- u32 cfgField; /* combination of WMI_THIN_CFG_... describes contents of config command */
- u16 length; /* length in bytes of appended sub-commands */
- u8 reserved[2]; /* align padding */
-} POSTPACK WMI_THIN_CONFIG_CMD;
-
-/* MIB Access Identifiers tailored for Symbian. */
-enum {
- MIB_ID_STA_MAC = 1, // [READONLY]
- MIB_ID_RX_LIFE_TIME, // [NOT IMPLEMENTED]
- MIB_ID_SLOT_TIME, // [READ/WRITE]
- MIB_ID_RTS_THRESHOLD, // [READ/WRITE]
- MIB_ID_CTS_TO_SELF, // [READ/WRITE]
- MIB_ID_TEMPLATE_FRAME, // [WRITE ONLY]
- MIB_ID_RXFRAME_FILTER, // [READ/WRITE]
- MIB_ID_BEACON_FILTER_TABLE, // [WRITE ONLY]
- MIB_ID_BEACON_FILTER, // [READ/WRITE]
- MIB_ID_BEACON_LOST_COUNT, // [WRITE ONLY]
- MIB_ID_RSSI_THRESHOLD, // [WRITE ONLY]
- MIB_ID_HT_CAP, // [NOT IMPLEMENTED]
- MIB_ID_HT_OP, // [NOT IMPLEMENTED]
- MIB_ID_HT_2ND_BEACON, // [NOT IMPLEMENTED]
- MIB_ID_HT_BLOCK_ACK, // [NOT IMPLEMENTED]
- MIB_ID_PREAMBLE, // [READ/WRITE]
- /*MIB_ID_GROUP_ADDR_TABLE,*/
- /*MIB_ID_WEP_DEFAULT_KEY_ID */
- /*MIB_ID_TX_POWER */
- /*MIB_ID_ARP_IP_TABLE */
- /*MIB_ID_SLEEP_MODE */
- /*MIB_ID_WAKE_INTERVAL*/
- /*MIB_ID_STAT_TABLE*/
- /*MIB_ID_IBSS_PWR_SAVE*/
- /*MIB_ID_COUNTERS_TABLE*/
- /*MIB_ID_ETHERTYPE_FILTER*/
- /*MIB_ID_BC_UDP_FILTER*/
-
-};
-
-typedef PREPACK struct {
- u8 addr[ATH_MAC_LEN];
-} POSTPACK WMI_THIN_MIB_STA_MAC;
-
-typedef PREPACK struct {
- u32 time; // units == msec
-} POSTPACK WMI_THIN_MIB_RX_LIFE_TIME;
-
-typedef PREPACK struct {
- u8 enable; //1 = on, 0 = off
-} POSTPACK WMI_THIN_MIB_CTS_TO_SELF;
-
-typedef PREPACK struct {
- u32 time; // units == usec
-} POSTPACK WMI_THIN_MIB_SLOT_TIME;
-
-typedef PREPACK struct {
- u16 length; //units == bytes
-} POSTPACK WMI_THIN_MIB_RTS_THRESHOLD;
-
-typedef PREPACK struct {
- u8 type; // type of frame
- u8 rate; // tx rate to be used (one of WMI_BIT_RATE)
- u16 length; // num bytes following this structure as the template data
-} POSTPACK WMI_THIN_MIB_TEMPLATE_FRAME;
-
-typedef PREPACK struct {
-#define FRAME_FILTER_PROMISCUOUS 0x00000001
-#define FRAME_FILTER_BSSID 0x00000002
- u32 filterMask;
-} POSTPACK WMI_THIN_MIB_RXFRAME_FILTER;
-
-
-#define IE_FILTER_TREATMENT_CHANGE 1
-#define IE_FILTER_TREATMENT_APPEAR 2
-
-typedef PREPACK struct {
- u8 ie;
- u8 treatment;
-} POSTPACK WMI_THIN_MIB_BEACON_FILTER_TABLE;
-
-typedef PREPACK struct {
- u8 ie;
- u8 treatment;
- u8 oui[3];
- u8 type;
- u16 version;
-} POSTPACK WMI_THIN_MIB_BEACON_FILTER_TABLE_OUI;
-
-typedef PREPACK struct {
- u16 numElements;
- u8 entrySize; // sizeof(WMI_THIN_MIB_BEACON_FILTER_TABLE) on host cpu may be 2 may be 4
- u8 reserved;
-} POSTPACK WMI_THIN_MIB_BEACON_FILTER_TABLE_HEADER;
-
-typedef PREPACK struct {
- u32 count; /* num beacons between deliveries */
- u8 enable;
- u8 reserved[3];
-} POSTPACK WMI_THIN_MIB_BEACON_FILTER;
-
-typedef PREPACK struct {
- u32 count; /* num consec lost beacons after which send event */
-} POSTPACK WMI_THIN_MIB_BEACON_LOST_COUNT;
-
-typedef PREPACK struct {
- u8 rssi; /* the low threshold which can trigger an event warning */
- u8 tolerance; /* the range above and below the threshold to prevent event flooding to the host. */
- u8 count; /* the sample count of consecutive frames necessary to trigger an event. */
- u8 reserved[1]; /* padding */
-} POSTPACK WMI_THIN_MIB_RSSI_THRESHOLD;
-
-
-typedef PREPACK struct {
- u32 cap;
- u32 rxRateField;
- u32 beamForming;
- u8 addr[ATH_MAC_LEN];
- u8 enable;
- u8 stbc;
- u8 maxAMPDU;
- u8 msduSpacing;
- u8 mcsFeedback;
- u8 antennaSelCap;
-} POSTPACK WMI_THIN_MIB_HT_CAP;
-
-typedef PREPACK struct {
- u32 infoField;
- u32 basicRateField;
- u8 protection;
- u8 secondChanneloffset;
- u8 channelWidth;
- u8 reserved;
-} POSTPACK WMI_THIN_MIB_HT_OP;
-
-typedef PREPACK struct {
-#define SECOND_BEACON_PRIMARY 1
-#define SECOND_BEACON_EITHER 2
-#define SECOND_BEACON_SECONDARY 3
- u8 cfg;
- u8 reserved[3]; /* padding */
-} POSTPACK WMI_THIN_MIB_HT_2ND_BEACON;
-
-typedef PREPACK struct {
- u8 txTIDField;
- u8 rxTIDField;
- u8 reserved[2]; /* padding */
-} POSTPACK WMI_THIN_MIB_HT_BLOCK_ACK;
-
-typedef PREPACK struct {
- u8 enableLong; // 1 == long preamble, 0 == short preamble
- u8 reserved[3];
-} POSTPACK WMI_THIN_MIB_PREAMBLE;
-
-typedef PREPACK struct {
- u16 length; /* the length in bytes of the appended MIB data */
- u8 mibID; /* the ID of the MIB element being set */
- u8 reserved; /* align padding */
-} POSTPACK WMI_THIN_SET_MIB_CMD;
-
-typedef PREPACK struct {
- u8 mibID; /* the ID of the MIB element being set */
- u8 reserved[3]; /* align padding */
-} POSTPACK WMI_THIN_GET_MIB_CMD;
-
-typedef PREPACK struct {
- u32 basicRateMask; /* bit mask of basic rates */
- u32 beaconIntval; /* TUs */
- u16 atimWindow; /* TUs */
- u16 channel; /* frequency in Mhz */
- u8 networkType; /* INFRA_NETWORK | ADHOC_NETWORK */
- u8 ssidLength; /* 0 - 32 */
- u8 probe; /* != 0 : issue probe req at start */
- u8 reserved; /* alignment */
- u8 ssid[WMI_MAX_SSID_LEN];
- u8 bssid[ATH_MAC_LEN];
-} POSTPACK WMI_THIN_JOIN_CMD;
-
-typedef PREPACK struct {
- u16 dtim; /* dtim interval in num beacons */
- u16 aid; /* 80211 AID from Assoc resp */
-} POSTPACK WMI_THIN_POST_ASSOC_CMD;
-
-typedef enum {
- WMI_THIN_EVENTID_RESERVED_START = 0x8000,
- WMI_THIN_GET_MIB_EVENTID,
- WMI_THIN_JOIN_EVENTID,
-
- /* Add new THIN EVENTID's here */
- WMI_THIN_EVENTID_RESERVED_END = 0x8fff
-} WMI_THIN_EVENT_ID;
-
-/* Possible values for WMI_THIN_JOIN_EVENT.result */
-typedef enum {
- WMI_THIN_JOIN_RES_SUCCESS = 0, // device has joined the network
- WMI_THIN_JOIN_RES_FAIL, // device failed for unspecified reason
- WMI_THIN_JOIN_RES_TIMEOUT, // device failed due to no beacon rx in time limit
- WMI_THIN_JOIN_RES_BAD_PARAM, // device failed due to bad cmd param.
-}WMI_THIN_JOIN_RESULT;
-
-typedef PREPACK struct {
- u8 result; /* the result of the join cmd. one of WMI_THIN_JOIN_RESULT */
- u8 reserved[3]; /* alignment */
-} POSTPACK WMI_THIN_JOIN_EVENT;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _WMI_THIN_H_ */
deleted file mode 100644
@@ -1,244 +0,0 @@
-//------------------------------------------------------------------------------
-// <copyright file="target_reg_table.h" company="Atheros">
-// Copyright (c) 2004-2010 Atheros Corporation. All rights reserved.
-//
-//
-// Permission to use, copy, modify, and/or distribute this software for any
-// purpose with or without fee is hereby granted, provided that the above
-// copyright notice and this permission notice appear in all copies.
-//
-// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-//
-//
-//------------------------------------------------------------------------------
-//==============================================================================
-// Target register table macros and structure definitions
-//
-// Author(s): ="Atheros"
-//==============================================================================
-
-#ifndef TARGET_REG_TABLE_H_
-#define TARGET_REG_TABLE_H_
-
-#include "targaddrs.h"
-
-/*** WARNING : Add to the end of the TABLE! do not change the order ****/
-typedef struct targetdef_s {
- u32 d_RTC_BASE_ADDRESS;
- u32 d_SYSTEM_SLEEP_OFFSET;
- u32 d_SYSTEM_SLEEP_DISABLE_LSB;
- u32 d_SYSTEM_SLEEP_DISABLE_MASK;
- u32 d_CLOCK_CONTROL_OFFSET;
- u32 d_CLOCK_CONTROL_SI0_CLK_MASK;
- u32 d_RESET_CONTROL_OFFSET;
- u32 d_RESET_CONTROL_SI0_RST_MASK;
- u32 d_GPIO_BASE_ADDRESS;
- u32 d_GPIO_PIN0_OFFSET;
- u32 d_GPIO_PIN1_OFFSET;
- u32 d_GPIO_PIN0_CONFIG_MASK;
- u32 d_GPIO_PIN1_CONFIG_MASK;
- u32 d_SI_CONFIG_BIDIR_OD_DATA_LSB;
- u32 d_SI_CONFIG_BIDIR_OD_DATA_MASK;
- u32 d_SI_CONFIG_I2C_LSB;
- u32 d_SI_CONFIG_I2C_MASK;
- u32 d_SI_CONFIG_POS_SAMPLE_LSB;
- u32 d_SI_CONFIG_POS_SAMPLE_MASK;
- u32 d_SI_CONFIG_INACTIVE_CLK_LSB;
- u32 d_SI_CONFIG_INACTIVE_CLK_MASK;
- u32 d_SI_CONFIG_INACTIVE_DATA_LSB;
- u32 d_SI_CONFIG_INACTIVE_DATA_MASK;
- u32 d_SI_CONFIG_DIVIDER_LSB;
- u32 d_SI_CONFIG_DIVIDER_MASK;
- u32 d_SI_BASE_ADDRESS;
- u32 d_SI_CONFIG_OFFSET;
- u32 d_SI_TX_DATA0_OFFSET;
- u32 d_SI_TX_DATA1_OFFSET;
- u32 d_SI_RX_DATA0_OFFSET;
- u32 d_SI_RX_DATA1_OFFSET;
- u32 d_SI_CS_OFFSET;
- u32 d_SI_CS_DONE_ERR_MASK;
- u32 d_SI_CS_DONE_INT_MASK;
- u32 d_SI_CS_START_LSB;
- u32 d_SI_CS_START_MASK;
- u32 d_SI_CS_RX_CNT_LSB;
- u32 d_SI_CS_RX_CNT_MASK;
- u32 d_SI_CS_TX_CNT_LSB;
- u32 d_SI_CS_TX_CNT_MASK;
- u32 d_BOARD_DATA_SZ;
- u32 d_BOARD_EXT_DATA_SZ;
-} TARGET_REGISTER_TABLE;
-
-#define BOARD_DATA_SZ_MAX 2048
-
-#if defined(MY_TARGET_DEF) /* { */
-
-#ifdef ATH_REG_TABLE_DIRECT_ASSIGN
-
-static struct targetdef_s my_target_def = {
- RTC_BASE_ADDRESS,
- SYSTEM_SLEEP_OFFSET,
- SYSTEM_SLEEP_DISABLE_LSB,
- SYSTEM_SLEEP_DISABLE_MASK,
- CLOCK_CONTROL_OFFSET,
- CLOCK_CONTROL_SI0_CLK_MASK,
- RESET_CONTROL_OFFSET,
- RESET_CONTROL_SI0_RST_MASK,
- GPIO_BASE_ADDRESS,
- GPIO_PIN0_OFFSET,
- GPIO_PIN0_CONFIG_MASK,
- GPIO_PIN1_OFFSET,
- GPIO_PIN1_CONFIG_MASK,
- SI_CONFIG_BIDIR_OD_DATA_LSB,
- SI_CONFIG_BIDIR_OD_DATA_MASK,
- SI_CONFIG_I2C_LSB,
- SI_CONFIG_I2C_MASK,
- SI_CONFIG_POS_SAMPLE_LSB,
- SI_CONFIG_POS_SAMPLE_MASK,
- SI_CONFIG_INACTIVE_CLK_LSB,
- SI_CONFIG_INACTIVE_CLK_MASK,
- SI_CONFIG_INACTIVE_DATA_LSB,
- SI_CONFIG_INACTIVE_DATA_MASK,
- SI_CONFIG_DIVIDER_LSB,
- SI_CONFIG_DIVIDER_MASK,
- SI_BASE_ADDRESS,
- SI_CONFIG_OFFSET,
- SI_TX_DATA0_OFFSET,
- SI_TX_DATA1_OFFSET,
- SI_RX_DATA0_OFFSET,
- SI_RX_DATA1_OFFSET,
- SI_CS_OFFSET,
- SI_CS_DONE_ERR_MASK,
- SI_CS_DONE_INT_MASK,
- SI_CS_START_LSB,
- SI_CS_START_MASK,
- SI_CS_RX_CNT_LSB,
- SI_CS_RX_CNT_MASK,
- SI_CS_TX_CNT_LSB,
- SI_CS_TX_CNT_MASK,
- MY_TARGET_BOARD_DATA_SZ,
- MY_TARGET_BOARD_EXT_DATA_SZ,
-};
-
-#else
-
-static struct targetdef_s my_target_def = {
- .d_RTC_BASE_ADDRESS = RTC_BASE_ADDRESS,
- .d_SYSTEM_SLEEP_OFFSET = SYSTEM_SLEEP_OFFSET,
- .d_SYSTEM_SLEEP_DISABLE_LSB = SYSTEM_SLEEP_DISABLE_LSB,
- .d_SYSTEM_SLEEP_DISABLE_MASK = SYSTEM_SLEEP_DISABLE_MASK,
- .d_CLOCK_CONTROL_OFFSET = CLOCK_CONTROL_OFFSET,
- .d_CLOCK_CONTROL_SI0_CLK_MASK = CLOCK_CONTROL_SI0_CLK_MASK,
- .d_RESET_CONTROL_OFFSET = RESET_CONTROL_OFFSET,
- .d_RESET_CONTROL_SI0_RST_MASK = RESET_CONTROL_SI0_RST_MASK,
- .d_GPIO_BASE_ADDRESS = GPIO_BASE_ADDRESS,
- .d_GPIO_PIN0_OFFSET = GPIO_PIN0_OFFSET,
- .d_GPIO_PIN0_CONFIG_MASK = GPIO_PIN0_CONFIG_MASK,
- .d_GPIO_PIN1_OFFSET = GPIO_PIN1_OFFSET,
- .d_GPIO_PIN1_CONFIG_MASK = GPIO_PIN1_CONFIG_MASK,
- .d_SI_CONFIG_BIDIR_OD_DATA_LSB = SI_CONFIG_BIDIR_OD_DATA_LSB,
- .d_SI_CONFIG_BIDIR_OD_DATA_MASK = SI_CONFIG_BIDIR_OD_DATA_MASK,
- .d_SI_CONFIG_I2C_LSB = SI_CONFIG_I2C_LSB,
- .d_SI_CONFIG_I2C_MASK = SI_CONFIG_I2C_MASK,
- .d_SI_CONFIG_POS_SAMPLE_LSB = SI_CONFIG_POS_SAMPLE_LSB,
- .d_SI_CONFIG_POS_SAMPLE_MASK = SI_CONFIG_POS_SAMPLE_MASK,
- .d_SI_CONFIG_INACTIVE_CLK_LSB = SI_CONFIG_INACTIVE_CLK_LSB,
- .d_SI_CONFIG_INACTIVE_CLK_MASK = SI_CONFIG_INACTIVE_CLK_MASK,
- .d_SI_CONFIG_INACTIVE_DATA_LSB = SI_CONFIG_INACTIVE_DATA_LSB,
- .d_SI_CONFIG_INACTIVE_DATA_MASK = SI_CONFIG_INACTIVE_DATA_MASK,
- .d_SI_CONFIG_DIVIDER_LSB = SI_CONFIG_DIVIDER_LSB,
- .d_SI_CONFIG_DIVIDER_MASK = SI_CONFIG_DIVIDER_MASK,
- .d_SI_BASE_ADDRESS = SI_BASE_ADDRESS,
- .d_SI_CONFIG_OFFSET = SI_CONFIG_OFFSET,
- .d_SI_TX_DATA0_OFFSET = SI_TX_DATA0_OFFSET,
- .d_SI_TX_DATA1_OFFSET = SI_TX_DATA1_OFFSET,
- .d_SI_RX_DATA0_OFFSET = SI_RX_DATA0_OFFSET,
- .d_SI_RX_DATA1_OFFSET = SI_RX_DATA1_OFFSET,
- .d_SI_CS_OFFSET = SI_CS_OFFSET,
- .d_SI_CS_DONE_ERR_MASK = SI_CS_DONE_ERR_MASK,
- .d_SI_CS_DONE_INT_MASK = SI_CS_DONE_INT_MASK,
- .d_SI_CS_START_LSB = SI_CS_START_LSB,
- .d_SI_CS_START_MASK = SI_CS_START_MASK,
- .d_SI_CS_RX_CNT_LSB = SI_CS_RX_CNT_LSB,
- .d_SI_CS_RX_CNT_MASK = SI_CS_RX_CNT_MASK,
- .d_SI_CS_TX_CNT_LSB = SI_CS_TX_CNT_LSB,
- .d_SI_CS_TX_CNT_MASK = SI_CS_TX_CNT_MASK,
- .d_BOARD_DATA_SZ = MY_TARGET_BOARD_DATA_SZ,
- .d_BOARD_EXT_DATA_SZ = MY_TARGET_BOARD_EXT_DATA_SZ,
-};
-
-#endif
-
-#if MY_TARGET_BOARD_DATA_SZ > BOARD_DATA_SZ_MAX
-#error "BOARD_DATA_SZ_MAX is too small"
-#endif
-
-struct targetdef_s *MY_TARGET_DEF = &my_target_def;
-
-#else /* } { */
-
-#define RTC_BASE_ADDRESS (targetdef->d_RTC_BASE_ADDRESS)
-#define SYSTEM_SLEEP_OFFSET (targetdef->d_SYSTEM_SLEEP_OFFSET)
-#define SYSTEM_SLEEP_DISABLE_LSB (targetdef->d_SYSTEM_SLEEP_DISABLE_LSB)
-#define SYSTEM_SLEEP_DISABLE_MASK (targetdef->d_SYSTEM_SLEEP_DISABLE_MASK)
-#define CLOCK_CONTROL_OFFSET (targetdef->d_CLOCK_CONTROL_OFFSET)
-#define CLOCK_CONTROL_SI0_CLK_MASK (targetdef->d_CLOCK_CONTROL_SI0_CLK_MASK)
-#define RESET_CONTROL_OFFSET (targetdef->d_RESET_CONTROL_OFFSET)
-#define RESET_CONTROL_SI0_RST_MASK (targetdef->d_RESET_CONTROL_SI0_RST_MASK)
-#define GPIO_BASE_ADDRESS (targetdef->d_GPIO_BASE_ADDRESS)
-#define GPIO_PIN0_OFFSET (targetdef->d_GPIO_PIN0_OFFSET)
-#define GPIO_PIN0_CONFIG_MASK (targetdef->d_GPIO_PIN0_CONFIG_MASK)
-#define GPIO_PIN1_OFFSET (targetdef->d_GPIO_PIN1_OFFSET)
-#define GPIO_PIN1_CONFIG_MASK (targetdef->d_GPIO_PIN1_CONFIG_MASK)
-#define SI_CONFIG_BIDIR_OD_DATA_LSB (targetdef->d_SI_CONFIG_BIDIR_OD_DATA_LSB)
-#define SI_CONFIG_BIDIR_OD_DATA_MASK (targetdef->d_SI_CONFIG_BIDIR_OD_DATA_MASK)
-#define SI_CONFIG_I2C_LSB (targetdef->d_SI_CONFIG_I2C_LSB)
-#define SI_CONFIG_I2C_MASK (targetdef->d_SI_CONFIG_I2C_MASK)
-#define SI_CONFIG_POS_SAMPLE_LSB (targetdef->d_SI_CONFIG_POS_SAMPLE_LSB)
-#define SI_CONFIG_POS_SAMPLE_MASK (targetdef->d_SI_CONFIG_POS_SAMPLE_MASK)
-#define SI_CONFIG_INACTIVE_CLK_LSB (targetdef->d_SI_CONFIG_INACTIVE_CLK_LSB)
-#define SI_CONFIG_INACTIVE_CLK_MASK (targetdef->d_SI_CONFIG_INACTIVE_CLK_MASK)
-#define SI_CONFIG_INACTIVE_DATA_LSB (targetdef->d_SI_CONFIG_INACTIVE_DATA_LSB)
-#define SI_CONFIG_INACTIVE_DATA_MASK (targetdef->d_SI_CONFIG_INACTIVE_DATA_MASK)
-#define SI_CONFIG_DIVIDER_LSB (targetdef->d_SI_CONFIG_DIVIDER_LSB)
-#define SI_CONFIG_DIVIDER_MASK (targetdef->d_SI_CONFIG_DIVIDER_MASK)
-#define SI_BASE_ADDRESS (targetdef->d_SI_BASE_ADDRESS)
-#define SI_CONFIG_OFFSET (targetdef->d_SI_CONFIG_OFFSET)
-#define SI_TX_DATA0_OFFSET (targetdef->d_SI_TX_DATA0_OFFSET)
-#define SI_TX_DATA1_OFFSET (targetdef->d_SI_TX_DATA1_OFFSET)
-#define SI_RX_DATA0_OFFSET (targetdef->d_SI_RX_DATA0_OFFSET)
-#define SI_RX_DATA1_OFFSET (targetdef->d_SI_RX_DATA1_OFFSET)
-#define SI_CS_OFFSET (targetdef->d_SI_CS_OFFSET)
-#define SI_CS_DONE_ERR_MASK (targetdef->d_SI_CS_DONE_ERR_MASK)
-#define SI_CS_DONE_INT_MASK (targetdef->d_SI_CS_DONE_INT_MASK)
-#define SI_CS_START_LSB (targetdef->d_SI_CS_START_LSB)
-#define SI_CS_START_MASK (targetdef->d_SI_CS_START_MASK)
-#define SI_CS_RX_CNT_LSB (targetdef->d_SI_CS_RX_CNT_LSB)
-#define SI_CS_RX_CNT_MASK (targetdef->d_SI_CS_RX_CNT_MASK)
-#define SI_CS_TX_CNT_LSB (targetdef->d_SI_CS_TX_CNT_LSB)
-#define SI_CS_TX_CNT_MASK (targetdef->d_SI_CS_TX_CNT_MASK)
-#define EEPROM_SZ (targetdef->d_BOARD_DATA_SZ)
-#define EEPROM_EXT_SZ (targetdef->d_BOARD_EXT_DATA_SZ)
-
-/* SET macros */
-#define SYSTEM_SLEEP_DISABLE_SET(x) (((x) << SYSTEM_SLEEP_DISABLE_LSB) & SYSTEM_SLEEP_DISABLE_MASK)
-#define SI_CONFIG_BIDIR_OD_DATA_SET(x) (((x) << SI_CONFIG_BIDIR_OD_DATA_LSB) & SI_CONFIG_BIDIR_OD_DATA_MASK)
-#define SI_CONFIG_I2C_SET(x) (((x) << SI_CONFIG_I2C_LSB) & SI_CONFIG_I2C_MASK)
-#define SI_CONFIG_POS_SAMPLE_SET(x) (((x) << SI_CONFIG_POS_SAMPLE_LSB) & SI_CONFIG_POS_SAMPLE_MASK)
-#define SI_CONFIG_INACTIVE_CLK_SET(x) (((x) << SI_CONFIG_INACTIVE_CLK_LSB) & SI_CONFIG_INACTIVE_CLK_MASK)
-#define SI_CONFIG_INACTIVE_DATA_SET(x) (((x) << SI_CONFIG_INACTIVE_DATA_LSB) & SI_CONFIG_INACTIVE_DATA_MASK)
-#define SI_CONFIG_DIVIDER_SET(x) (((x) << SI_CONFIG_DIVIDER_LSB) & SI_CONFIG_DIVIDER_MASK)
-#define SI_CS_START_SET(x) (((x) << SI_CS_START_LSB) & SI_CS_START_MASK)
-#define SI_CS_RX_CNT_SET(x) (((x) << SI_CS_RX_CNT_LSB) & SI_CS_RX_CNT_MASK)
-#define SI_CS_TX_CNT_SET(x) (((x) << SI_CS_TX_CNT_LSB) & SI_CS_TX_CNT_MASK)
-
-#endif /* } */
-
-#endif /*TARGET_REG_TABLE_H_*/
-
-
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> --- .../include/common/AR6002/hw4.0/hw/vmc_wlan_reg.h | 195 ------ drivers/staging/ath6kl/include/common/a_hci.h | 682 -------------------- .../staging/ath6kl/include/common/dset_internal.h | 55 -- drivers/staging/ath6kl/include/common/dsetid.h | 126 ---- .../include/common/regulatory/reg_dbschema.h | 237 ------- .../include/common/regulatory/reg_dbvalues.h | 504 --------------- drivers/staging/ath6kl/include/common/wmi_thin.h | 347 ---------- drivers/staging/ath6kl/include/target_reg_table.h | 244 ------- 8 files changed, 0 insertions(+), 2390 deletions(-) delete mode 100644 drivers/staging/ath6kl/include/common/AR6002/hw4.0/hw/vmc_wlan_reg.h delete mode 100644 drivers/staging/ath6kl/include/common/a_hci.h delete mode 100644 drivers/staging/ath6kl/include/common/dset_internal.h delete mode 100644 drivers/staging/ath6kl/include/common/dsetid.h delete mode 100644 drivers/staging/ath6kl/include/common/regulatory/reg_dbschema.h delete mode 100644 drivers/staging/ath6kl/include/common/regulatory/reg_dbvalues.h delete mode 100644 drivers/staging/ath6kl/include/common/wmi_thin.h delete mode 100644 drivers/staging/ath6kl/include/target_reg_table.h