@@ -14,20 +14,27 @@ else
include $(KLIB_BUILD)/.config
endif
-# We will warn when you don't have MQ support or NET_SCHED enabled.
-#
-# We could consider just quiting if MQ and NET_SCHED is disabled
-# as I suspect all users of this package want 802.11e (WME) and
-# 802.11n (HT) support.
ifneq ($(wildcard $(KLIB_BUILD)/Makefile),)
-COMPAT_LATEST_VERSION = 37
-KERNEL_SUBLEVEL := $(shell $(MAKE) -C $(KLIB_BUILD) kernelversion | sed -n 's/^2\.6\.\([0-9]\+\).*/\1/p')
+
+COMPAT_LATEST_VERSION = 1
+KERNEL_VERSION := $(shell $(MAKE) -C $(KLIB_BUILD) kernelversion | sed -n 's/^\([0-9]\)\..*/\1/p')
+
+ifeq ($(KERNEL_VERSION),3)
+KERNEL_SUBLEVEL := $(shell $(MAKE) -C $(KLIB_BUILD) kernelversion | sed -n 's/^3\.\([0-9]\+\).*/\1/p')
+else
+COMPAT_26LATEST_VERSION = 39
+KERNEL_26SUBLEVEL := $(shell $(MAKE) -C $(KLIB_BUILD) kernelversion | sed -n 's/^2\.6\.\([0-9]\+\).*/\1/p')
+COMPAT_26VERSIONS := $(shell I=$(COMPAT_26LATEST_VERSION); while [ "$$I" -gt $(KERNEL_26SUBLEVEL) ]; do echo $$I; I=$$(($$I - 1)); done)
+$(foreach ver,$(COMPAT_26VERSIONS),$(eval CONFIG_COMPAT_KERNEL_26$(ver)=y))
+KERNEL_SUBLEVEL := -1
+endif
+
COMPAT_VERSIONS := $(shell I=$(COMPAT_LATEST_VERSION); while [ "$$I" -gt $(KERNEL_SUBLEVEL) ]; do echo $$I; I=$$(($$I - 1)); done)
-$(foreach ver,$(COMPAT_VERSIONS),$(eval CONFIG_COMPAT_KERNEL_$(ver)=y))
+$(foreach ver,$(COMPAT_VERSIONS),$(eval CONFIG_COMPAT_KERNEL_3$(ver)=y))
-ifdef CONFIG_COMPAT_KERNEL_24
+ifdef CONFIG_COMPAT_KERNEL_2624
$(error "ERROR: compat-wireless by default supports kernels >= 2.6.24, try enabling only one driver though")
-endif #CONFIG_COMPAT_KERNEL_24
+endif #CONFIG_COMPAT_KERNEL_2624
ifeq ($(CONFIG_CFG80211),y)
$(error "ERROR: your kernel has CONFIG_CFG80211=y, you should have it CONFIG_CFG80211=m if you want to use this thing.")
@@ -54,14 +61,21 @@ endif
#
# In kernel 2.6.32 both attributes were removed.
#
-ifeq ($(shell test $(KERNEL_SUBLEVEL) -ge 27 -a $(KERNEL_SUBLEVEL) -le 31 && echo yes),yes)
+ifeq ($(KERNEL_VERSION),2)
+ifeq ($(shell test $(KERNEL_26SUBLEVEL) -ge 27 -a $(KERNEL_26SUBLEVEL) -le 31 && echo yes),yes)
ifeq ($(CONFIG_MAC80211),)
$(error "ERROR: Your >=2.6.27 and <= 2.6.31 kernel has CONFIG_MAC80211 disabled, you should have it CONFIG_MAC80211=m if you want to use this thing.")
endif
endif
+endif
ifneq ($(KERNELRELEASE),) # This prevents a warning
+# We will warn when you don't have MQ support or NET_SCHED enabled.
+#
+# We could consider just quiting if MQ and NET_SCHED is disabled
+# as I suspect all users of this package want 802.11e (WME) and
+# 802.11n (HT) support.
ifeq ($(CONFIG_NET_SCHED),)
QOS_REQS_MISSING+=CONFIG_NET_SCHED
endif
@@ -92,21 +106,20 @@ else
endif
# The Bluetooth compatibility only builds on kernels >= 2.6.27 for now
-ifndef CONFIG_COMPAT_KERNEL_27
+ifndef CONFIG_COMPAT_KERNEL_2627
ifeq ($(CONFIG_BT),y)
# we'll ignore compiling bluetooth
else
CONFIG_COMPAT_BLUETOOTH=y
CONFIG_COMPAT_BLUETOOTH_MODULES=m
endif
-endif #CONFIG_COMPAT_KERNEL_27
+endif #CONFIG_COMPAT_KERNEL_2627
-ifdef CONFIG_COMPAT_KERNEL_33
+ifdef CONFIG_COMPAT_KERNEL_2633
ifdef CONFIG_FW_LOADER
CONFIG_COMPAT_FIRMWARE_CLASS=m
endif #CONFIG_FW_LOADER
-endif #CONFIG_COMPAT_KERNEL_33
-
+endif #CONFIG_COMPAT_KERNEL_2633
# Wireless subsystem stuff
CONFIG_MAC80211=m
@@ -133,7 +146,9 @@ CONFIG_COMPAT_MAC80211_RC_DEFAULT=minstrel_ht
CONFIG_MAC80211_RC_PID=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
+ifdef CONFIG_LEDS_TRIGGERS
CONFIG_MAC80211_LEDS=y
+endif #CONFIG_LEDS_TRIGGERS
# enable mesh networking too
CONFIG_MAC80211_MESH=y
@@ -153,8 +168,8 @@ CONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG=y
CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
+CONFIG_COMPAT_BT_L2CAP=y
+CONFIG_COMPAT_BT_SCO=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
@@ -164,7 +179,9 @@ CONFIG_BT_BNEP_PROTO_FILTER=y
ifdef CONFIG_ISDN_CAPI
CONFIG_BT_CMTP=m
endif #CONFIG_ISDN_CAPI
-CONFIG_BT_HIDP=m
+ifndef CONFIG_COMPAT_KERNEL_2628
+CONFIG_COMPAT_BT_HIDP=m
+endif #CONFIG_COMPAT_KERNEL_2628
CONFIG_BT_HCIUART=M
CONFIG_BT_HCIUART_H4=y
@@ -196,26 +213,24 @@ else #CONFIG_CFG80211_WEXT
$(warning "WARNING: CONFIG_CFG80211_WEXT will be deactivated or not working because kernel was compiled with CONFIG_WIRELESS_EXT=n. Tools using wext interface like iwconfig will not work. To activate it build your kernel e.g. with CONFIG_LIBIPW=m.")
endif #CONFIG_WIRELESS_EXT
-ifneq ($(CONFIG_STAGING),)
- CONFIG_COMPAT_STAGING=m
-endif
+ifdef CONFIG_STAGING
+CONFIG_COMPAT_STAGING=m
+endif #CONFIG_STAGING
# mac80211 test driver
CONFIG_MAC80211_HWSIM=m
-# PCI Drivers
-ifdef CONFIG_PCI
-
CONFIG_ATH5K=m
CONFIG_ATH5K_DEBUG=y
-CONFIG_ATH9K_HW=m
+# CONFIG_ATH5K_AHB=y
+
CONFIG_ATH9K=m
-# Note: once ath9k_htc is added we'll have to move
-# CONFIG_ATH9K_COMMON to an area that doesn't depend on PCI
-# as you could then have ath9k disabled but ath9k_htc enabled.
+CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_DEBUGFS=y
+# CONFIG_ATH9K_AHB=y
CONFIG_ATH9K_PKTLOG=y
+
# Disable this to get minstrel as default, we leave the ath9k
# rate control algorithm as the default for now as that is also
# default upstream on the kernel. We will move this to minstrel
@@ -224,15 +239,25 @@ CONFIG_ATH9K_PKTLOG=y
# for long range considerations.
CONFIG_ATH9K_RATE_CONTROL=y
+# PCI Drivers
+ifdef CONFIG_PCI
-CONFIG_COMPAT_IWLWIFI=m
+CONFIG_ATH5K_PCI=y
+CONFIG_ATH9K_PCI=y
+
+CONFIG_IWLAGN=m
# CONFIG_IWLWIFI_DEBUG=y
# CONFIG_IWLWIFI_DEBUGFS=y
# CONFIG_IWLWIFI_DEVICE_TRACING=y
-CONFIG_IWLAGN=m
-CONFIG_COMPAT_IWL4965=y
-CONFIG_IWL5000=y
+# CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE=y
+CONFIG_IWL_P2P=y
+
+CONFIG_IWLWIFI_LEGACY=m
+CONFIG_COMPAT_IWL4965=m
CONFIG_IWL3945=m
+# CONFIG_IWLWIFI_LEGACY_DEBUG=y
+# CONFIG_IWLWIFI_LEGACY_DEBUGFS=y
+# CONFIG_IWLWIFI_LEGACY_DEVICE_TRACING=y
CONFIG_B43=m
@@ -241,16 +266,20 @@ CONFIG_B43_PCI_AUTOSELECT=y
ifdef CONFIG_PCMCIA
CONFIG_B43_PCMCIA=y
endif #CONFIG_PCMCIA
+ifdef CONFIG_MAC80211_LEDS
CONFIG_B43_LEDS=y
+endif #CONFIG_MAC80211_LEDS
CONFIG_B43_PHY_LP=y
-CONFIG_B43_NPHY=y
+CONFIG_B43_PHY_N=y
# CONFIG_B43_FORCE_PIO=y
# CONFIG_B43_DEBUG=y
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_HWRNG=y
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+ifdef CONFIG_MAC80211_LEDS
CONFIG_B43LEGACY_LEDS=y
+endif #CONFIG_MAC80211_LEDS
# CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
@@ -286,7 +315,6 @@ endif #CONFIG_WIRELESS_EXT
ifdef CONFIG_SSB
# Sonics Silicon Backplane
CONFIG_SSB_SPROM=y
-# CONFIG_SSB_DEBUG=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST=y
@@ -312,10 +340,9 @@ CONFIG_RT2400PCI=m
CONFIG_RT2500PCI=m
ifdef CONFIG_CRC_CCITT
CONFIG_RT2800PCI=m
-CONFIG_RT2800PCI_PCI=y
-# CONFIG_RT2800PCI_RT30XX=y
-# CONFIG_RT2800PCI_RT35XX=y
-# CONFIG_RT2800PCI_SOC=y
+CONFIG_RT2800PCI_RT33XX=y
+CONFIG_RT2800PCI_RT35XX=y
+# CONFIG_RT2800PCI_RT53XX=y
endif #CONFIG_CRC_CCITT
NEED_RT2X00=y
@@ -324,7 +351,6 @@ NEED_RT2X00=y
# driver as we're in the PCI section.
ifdef CONFIG_CRC_ITU_T
CONFIG_RT61PCI=m
-NEED_RT2X00_FIRMWARE=y
endif #CONFIG_CRC_ITU_T
CONFIG_MWL8K=m
@@ -333,11 +359,11 @@ CONFIG_MWL8K=m
CONFIG_ATL1=m
CONFIG_ATL2=m
CONFIG_ATL1E=m
-ifdef CONFIG_COMPAT_KERNEL_27
+ifdef CONFIG_COMPAT_KERNEL_2627
CONFIG_ATL1C=n
-else #CONFIG_COMPAT_KERNEL_27
+else #CONFIG_COMPAT_KERNEL_2627
CONFIG_ATL1C=m
-endif #CONFIG_COMPAT_KERNEL_27
+endif #CONFIG_COMPAT_KERNEL_2627
ifdef CONFIG_WIRELESS_EXT
CONFIG_HERMES=m
@@ -355,18 +381,25 @@ CONFIG_PCMCIA_SPECTRUM=m
endif #CONFIG_PCMCIA
endif #CONFIG_WIRELESS_EXT
+CONFIG_RTL8192CE=m
+CONFIG_RTL8192SE=m
+
+ifdef CONFIG_COMPAT_STAGING
+CONFIG_BRCMSMAC=m
+endif #CONFIG_COMPAT_STAGING
+
endif #CONFIG_PCI
## end of PCI
ifdef CONFIG_PCMCIA
-ifdef CONFIG_COMPAT_KERNEL_27
+ifdef CONFIG_COMPAT_KERNEL_2627
CONFIG_LIBERTAS=n
CONFIG_LIBERTAS_CS=n
-else #CONFIG_COMPAT_KERNEL_27
+else #CONFIG_COMPAT_KERNEL_2627
CONFIG_LIBERTAS_CS=m
NEED_LIBERTAS=y
-endif #CONFIG_COMPAT_KERNEL_27
+endif #CONFIG_COMPAT_KERNEL_2627
endif #CONFIG_PCMCIA
## end of PCMCIA
@@ -376,8 +409,10 @@ CONFIG_EEPROM_93CX6=m
# USB Drivers
ifdef CONFIG_USB
-CONFIG_ZD1211RW=m
+ifndef CONFIG_COMPAT_KERNEL_2629
+CONFIG_COMPAT_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG=y
+endif #CONFIG_COMPAT_KERNEL_2629
# Sorry, rndis_wlan uses cancel_work_sync which is new and can't be done in compat...
@@ -386,38 +421,41 @@ CONFIG_ZD1211RW=m
# is only wireless RNDIS chip known to date.
# Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER
# it also requires new RNDIS_HOST and CDC_ETHER modules which we add
-ifdef CONFIG_COMPAT_KERNEL_29
+ifdef CONFIG_COMPAT_KERNEL_2629
CONFIG_USB_COMPAT_USBNET=n
CONFIG_USB_NET_COMPAT_RNDIS_HOST=n
CONFIG_USB_NET_COMPAT_RNDIS_WLAN=n
CONFIG_USB_NET_COMPAT_CDCETHER=n
-else #CONFIG_COMPAT_KERNEL_29
+else #CONFIG_COMPAT_KERNEL_2629
CONFIG_USB_COMPAT_USBNET=m
ifdef CONFIG_USB_NET_CDCETHER
CONFIG_USB_NET_COMPAT_RNDIS_HOST=m
CONFIG_USB_NET_COMPAT_RNDIS_WLAN=m
endif #CONFIG_USB_NET_CDCETHER
+ifdef CONFIG_USB_NET_CDCETHER_MODULE
+CONFIG_USB_NET_COMPAT_RNDIS_HOST=m
+CONFIG_USB_NET_COMPAT_RNDIS_WLAN=m
+endif #CONFIG_USB_NET_CDCETHER
CONFIG_USB_NET_COMPAT_CDCETHER=m
-endif #CONFIG_COMPAT_KERNEL_29
+endif #CONFIG_COMPAT_KERNEL_2629
CONFIG_P54_USB=m
CONFIG_RTL8187=m
+ifdef CONFIG_MAC80211_LEDS
CONFIG_RTL8187_LEDS=y
+endif #CONFIG_MAC80211_LEDS
CONFIG_AT76C50X_USB=m
-ifndef CONFIG_COMPAT_KERNEL_28
-CONFIG_AR9170_USB=m
-CONFIG_AR9170_LEDS=y
-endif #CONFIG_COMPAT_KERNEL_28
-
-ifndef CONFIG_COMPAT_KERNEL_29
+ifndef CONFIG_COMPAT_KERNEL_2629
CONFIG_CARL9170=m
+ifdef CONFIG_MAC80211_LEDS
CONFIG_CARL9170_LEDS=y
+endif #CONFIG_MAC80211_LEDS
CONFIG_CARL9170_DEBUGFS=y
CONFIG_CARL9170_WPC=y
-endif #CONFIG_COMPAT_KERNEL_29
+endif #CONFIG_COMPAT_KERNEL_2629
# This activates a threading fix for usb urb.
# this is mainline commit: b3e670443b7fb8a2d29831b62b44a039c283e351
@@ -431,8 +469,9 @@ CONFIG_ATH9K_HTC_DEBUGFS=y
CONFIG_RT2500USB=m
ifdef CONFIG_CRC_CCITT
CONFIG_RT2800USB=m
-CONFIG_RT2800USB_RT30XX=y
+CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
+# CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_UNKNOWN=y
endif #CONFIG_CRC_CCITT
CONFIG_RT2X00_LIB_USB=m
@@ -440,18 +479,17 @@ NEED_RT2X00=y
# RT73USB requires firmware
ifdef CONFIG_CRC_ITU_T
CONFIG_RT73USB=m
-NEED_RT2X00_FIRMWARE=y
endif #CONFIG_CRC_ITU_T
-ifdef CONFIG_COMPAT_KERNEL_27
+ifdef CONFIG_COMPAT_KERNEL_2627
CONFIG_LIBERTAS_THINFIRM_USB=n
CONFIG_LIBERTAS_USB=n
NEED_LIBERTAS=n
-else #CONFIG_COMPAT_KERNEL_27
+else #CONFIG_COMPAT_KERNEL_2627
CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_LIBERTAS_USB=m
NEED_LIBERTAS=y
-endif #CONFIG_COMPAT_KERNEL_27
+endif #CONFIG_COMPAT_KERNEL_2627
CONFIG_ORINOCO_USB=m
@@ -461,26 +499,28 @@ CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_ATH3K=m
+CONFIG_RTL8192CU=m
+
endif #CONFIG_USB end of USB driver list
ifdef CONFIG_SPI_MASTER
-ifndef CONFIG_COMPAT_KERNEL_25
+ifndef CONFIG_COMPAT_KERNEL_2625
ifdef CONFIG_CRC7
CONFIG_WL1251_SPI=m
-CONFIG_WL1271_SPI=m
+CONFIG_WL12XX_SPI=m
endif #CONFIG_CRC7
CONFIG_P54_SPI=m
-ifdef CONFIG_COMPAT_KERNEL_27
+ifdef CONFIG_COMPAT_KERNEL_2627
CONFIG_LIBERTAS_SPI=n
NEED_LIBERTAS=n
-else #CONFIG_COMPAT_KERNEL_27
+else #CONFIG_COMPAT_KERNEL_2627
CONFIG_LIBERTAS_SPI=m
NEED_LIBERTAS=y
-endif #CONFIG_COMPAT_KERNEL_27
+endif #CONFIG_COMPAT_KERNEL_2627
-endif #CONFIG_COMPAT_KERNEL_25
+endif #CONFIG_COMPAT_KERNEL_2625
endif #CONFIG_SPI_MASTER end of SPI driver list
ifdef CONFIG_MMC
@@ -489,23 +529,27 @@ CONFIG_SSB_SDIOHOST=y
CONFIG_B43_SDIO=y
ifdef CONFIG_CRC7
-CONFIG_WL1251_SDIO=m
+ifdef CONFIG_WL12XX_PLATFORM_DATA
+CONFIG_COMPAT_WL1251_SDIO=m
+endif #CONFIG_WL12XX_PLATFORM_DATA
-ifndef CONFIG_COMPAT_KERNEL_32
+ifndef CONFIG_COMPAT_KERNEL_2632
ifdef CONFIG_WL12XX_PLATFORM_DATA
-CONFIG_WL1271_SDIO=m
+CONFIG_COMPAT_WL12XX_SDIO=m
endif #CONFIG_WL12XX_PLATFORM_DATA
-endif #CONFIG_COMPAT_KERNEL_32
+endif #CONFIG_COMPAT_KERNEL_2632
endif #CONFIG_CRC7
-ifdef CONFIG_COMPAT_KERNEL_27
+CONFIG_MWIFIEX_SDIO=m
+
+ifdef CONFIG_COMPAT_KERNEL_2627
CONFIG_LIBERTAS_SDIO=n
NEED_LIBERTAS=n
-else #CONFIG_COMPAT_KERNEL_27
+else #CONFIG_COMPAT_KERNEL_2627
CONFIG_LIBERTAS_SDIO=m
NEED_LIBERTAS=y
-endif #CONFIG_COMPAT_KERNEL_27
+endif #CONFIG_COMPAT_KERNEL_2627
CONFIG_IWM=m
# CONFIG_IWM_DEBUG=y
@@ -513,10 +557,8 @@ CONFIG_IWM=m
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_MRVL_SDIO=m
-ifneq ($(CONFIG_COMPAT_STAGING),)
+ifdef CONFIG_COMPAT_STAGING
ifdef CONFIG_WIRELESS_EXT
-CONFIG_ATH6KL_CFG80211=y
-CONFIG_ATH6KL_DEBUG=y
# CONFIG_ATH6KL_DISABLE_TARGET_DBGLOGS is not set
# CONFIG_ATH6KL_ENABLE_COEXISTENCE is not set
# CONFIG_ATH6KL_ENABLE_HOST_DEBUG is not set
@@ -527,66 +569,77 @@ CONFIG_ATH6KL_ENABLE_TARGET_DEBUG_PRINTS=y
CONFIG_ATH6KL_VIRTUAL_SCATTER_GATHER=y
CONFIG_ATH6K_LEGACY=m
-CONFIG_BRCM80211=m
-CONFIG_BRCM80211_PCI=y
+CONFIG_BRCMFMAC=m
endif #CONFIG_WIRELESS_EXT
-endif #CONFIG_MMC
+endif #CONFIG_COMPAT_STAGING
+
+endif #CONFIG_MMC
-endif # end of SDIO driver list
+CONFIG_RTLWIFI=m
+CONFIG_RTL8192C_COMMON=m
# Common rt2x00 requirements
ifeq ($(NEED_RT2X00),y)
CONFIG_RT2X00=y
CONFIG_RT2X00_LIB=m
CONFIG_RT2800_LIB=m
-CONFIG_RT2X00_LIB_HT=y
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
-ifdef CONFIG_COMPAT_KERNEL_25
+# CONFIG_RT2X00_LIB_SOC=y
+ifdef CONFIG_COMPAT_KERNEL_2625
CONFIG_RT2X00_LIB_LEDS=n
-else #CONFIG_COMPAT_KERNEL_25
+else #CONFIG_COMPAT_KERNEL_2625
+ifdef CONFIG_LEDS_CLASS
CONFIG_RT2X00_LIB_LEDS=y
-endif #CONFIG_COMPAT_KERNEL_25
+endif #CONFIG_LEDS_CLASS
+endif #CONFIG_COMPAT_KERNEL_2625
# CONFIG_RT2X00_DEBUG=y
# CONFIG_RT2X00_LIB_DEBUGFS
endif
-ifeq ($(NEED_RT2X00_FIRMWARE),y)
-CONFIG_RT2X00_LIB_FIRMWARE=y
-endif
-
# p54
CONFIG_P54_COMMON=m
+ifdef CONFIG_MAC80211_LEDS
CONFIG_P54_LEDS=y
+endif #CONFIG_MAC80211_LEDS
# Atheros
CONFIG_ATH_COMMON=m
CONFIG_ATH_DEBUG=y
-CONFIG_WL12XX=y
+ifdef CONFIG_COMPAT_STAGING
+CONFIG_BRCMUTIL=m
+# CONFIG_BRCMDBG=y
+endif #CONFIG_COMPAT_STAGING
+
ifdef CONFIG_CRC7
CONFIG_WL1251=m
-CONFIG_WL1271=m
+CONFIG_WL12XX=m
+CONFIG_WL12XX_HT=y
endif #CONFIG_CRC7
-ifdef CONFIG_COMPAT_KERNEL_27
+CONFIG_MWIFIEX=m
+
+ifdef CONFIG_COMPAT_KERNEL_2627
CONFIG_LIBERTAS=n
-else #CONFIG_COMPAT_KERNEL_27
+else #CONFIG_COMPAT_KERNEL_2627
ifeq ($(NEED_LIBERTAS),y)
CONFIG_LIBERTAS_THINFIRM=m
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_MESH=y
# CONFIG_LIBERTAS_DEBUG=y
endif
-endif #CONFIG_COMPAT_KERNEL_27
+endif #CONFIG_COMPAT_KERNEL_2627
# We need the backported rfkill module on kernel < 2.6.31.
# In more recent kernel versions use the in kernel rfkill module.
-ifdef CONFIG_COMPAT_KERNEL_31
+ifdef CONFIG_COMPAT_KERNEL_2631
CONFIG_RFKILL_BACKPORT=m
+ifdef CONFIG_LEDS_TRIGGERS
CONFIG_RFKILL_BACKPORT_LEDS=y
+endif #CONFIG_LEDS_TRIGGERS
CONFIG_RFKILL_BACKPORT_INPUT=y
-endif #CONFIG_COMPAT_KERNEL_31
+endif #CONFIG_COMPAT_KERNEL_2631
Add to compat-3.0-stable Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> --- defconfigs/atheros-debug.mk | 247 ++++++++++++++++++++++++++----------------- 1 files changed, 150 insertions(+), 97 deletions(-)