diff mbox

[v3,5/5] ath9k_hw: fix AR9462 2g5g switch on full reset

Message ID 1341152635-4840-5-git-send-email-rmanohar@qca.qualcomm.com (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

Manoharan, Rajkumar July 1, 2012, 2:23 p.m. UTC 
On full reset, mci reset will put LNA update on 2G mode. And
Whenever 2g5g_switch is forced at the end of full reset, lna
update should not be skipped. Not doing so, is affecting WLAN
rx and causing beacon loss when BTCOEX is enabled on AR9462.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_mci.c | 18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)
diff mbox

Patch

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
index 6155837..9a34fca 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
@@ -1015,12 +1015,9 @@  void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool force)
 		return;
 
 	if (mci->is_2g) {
-		if (!force) {
-			ar9003_mci_send_2g5g_status(ah, true);
-
-			ar9003_mci_send_lna_transfer(ah, true);
-			udelay(5);
-		}
+		ar9003_mci_send_2g5g_status(ah, true);
+		ar9003_mci_send_lna_transfer(ah, true);
+		udelay(5);
 
 		REG_CLR_BIT(ah, AR_MCI_TX_CTRL,
 			    AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
@@ -1030,10 +1027,8 @@  void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool force)
 		if (!(mci->config & ATH_MCI_CONFIG_DISABLE_OSLA))
 			ar9003_mci_osla_setup(ah, true);
 	} else {
-		if (!force) {
-			ar9003_mci_send_lna_take(ah, true);
-			udelay(5);
-		}
+		ar9003_mci_send_lna_take(ah, true);
+		udelay(5);
 
 		REG_SET_BIT(ah, AR_MCI_TX_CTRL,
 			    AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
@@ -1041,8 +1036,7 @@  void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool force)
 			    AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL);
 
 		ar9003_mci_osla_setup(ah, false);
-		if (!force)
-			ar9003_mci_send_2g5g_status(ah, true);
+		ar9003_mci_send_2g5g_status(ah, true);
 	}
 }