@@ -138,7 +138,8 @@ static const struct ar9300_eeprom ar9300_default = {
},
.base_ext1 = {
.ant_div_control = 0,
- .future = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
+ .future = {0, 0, 0},
+ .tempslopextension = {0, 0, 0, 0, 0, 0, 0, 0}
},
.calFreqPier2G = {
FREQ2FBIN(2412, 1),
@@ -713,7 +714,8 @@ static const struct ar9300_eeprom ar9300_x113 = {
},
.base_ext1 = {
.ant_div_control = 0,
- .future = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
+ .future = {0, 0, 0},
+ .tempslopextension = {0, 0, 0, 0, 0, 0, 0, 0}
},
.calFreqPier2G = {
FREQ2FBIN(2412, 1),
@@ -1289,7 +1291,8 @@ static const struct ar9300_eeprom ar9300_h112 = {
},
.base_ext1 = {
.ant_div_control = 0,
- .future = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
+ .future = {0, 0, 0},
+ .tempslopextension = {0, 0, 0, 0, 0, 0, 0, 0}
},
.calFreqPier2G = {
FREQ2FBIN(2412, 1),
@@ -1865,7 +1868,8 @@ static const struct ar9300_eeprom ar9300_x112 = {
},
.base_ext1 = {
.ant_div_control = 0,
- .future = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
+ .future = {0, 0, 0},
+ .tempslopextension = {0, 0, 0, 0, 0, 0, 0, 0}
},
.calFreqPier2G = {
FREQ2FBIN(2412, 1),
@@ -2440,7 +2444,8 @@ static const struct ar9300_eeprom ar9300_h116 = {
},
.base_ext1 = {
.ant_div_control = 0,
- .future = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
+ .future = {0, 0, 0},
+ .tempslopextension = {0, 0, 0, 0, 0, 0, 0, 0}
},
.calFreqPier2G = {
FREQ2FBIN(2412, 1),
@@ -4528,7 +4533,7 @@ static int ar9003_hw_power_control_override(struct ath_hw *ah,
{
int tempSlope = 0;
struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
- int f[3], t[3];
+ int f[8], t[8], i;
REG_RMW(ah, AR_PHY_TPC_11_B0,
(correction[0] << AR_PHY_TPC_OLPC_GAIN_DELTA_S),
@@ -4561,7 +4566,14 @@ static int ar9003_hw_power_control_override(struct ath_hw *ah,
*/
if (frequency < 4000)
tempSlope = eep->modalHeader2G.tempSlope;
- else if (eep->base_ext2.tempSlopeLow != 0) {
+ else if ((eep->baseEepHeader.miscConfiguration & 0x20) != 0) {
+ for (i = 0; i < 8; i++) {
+ t[i] = eep->base_ext1.tempslopextension[i];
+ f[i] = FBIN2FREQ(eep->calFreqPier5G[i], 0);
+ }
+ tempSlope = ar9003_hw_power_interpolate((s32) frequency,
+ f, t, 8);
+ } else if (eep->base_ext2.tempSlopeLow != 0) {
t[0] = eep->base_ext2.tempSlopeLow;
f[0] = 5180;
t[1] = eep->modalHeader5G.tempSlope;
@@ -267,7 +267,8 @@ struct cal_ctl_data_5g {
struct ar9300_BaseExtension_1 {
u8 ant_div_control;
- u8 future[11];
+ u8 future[3];
+ u8 tempslopextension[8];
int8_t quick_drop_low;
int8_t quick_drop_high;
} __packed;
@@ -96,6 +96,7 @@
#define ATH9K_POW_SM(_r, _s) (((_r) & 0x3f) << (_s))
#define FREQ2FBIN(x, y) ((y) ? ((x) - 2300) : (((x) - 4800) / 5))
+#define FBIN2FREQ(x, y) ((y) ? (2300 + x) : (4800 + 5 * x))
#define ath9k_hw_use_flash(_ah) (!(_ah->ah_flags & AH_USE_EEPROM))
#define AR5416_VER_MASK (eep->baseEepHeader.version & AR5416_EEP_VER_MINOR_MASK)
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> --- drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 26 +++++++++++++++++++------- drivers/net/wireless/ath/ath9k/ar9003_eeprom.h | 3 ++- drivers/net/wireless/ath/ath9k/eeprom.h | 1 + 3 files changed, 22 insertions(+), 8 deletions(-)