@@ -488,6 +488,7 @@ struct ath_btcoex {
int rssi_count;
struct ath_gen_timer *no_stomp_timer; /* Timer for no BT stomping */
struct ath_mci_profile mci;
+ u8 stomp_audio;
};
#ifdef CONFIG_ATH9K_BTCOEX_SUPPORT
@@ -49,6 +49,7 @@ static const u32 mci_wlan_weights[ATH_BTCOEX_STOMP_MAX]
{ 0x01017d01, 0x3b3b3b01, 0x3b3b3b01, 0x3b3b3b3b }, /* STOMP_LOW */
{ 0x01017d01, 0x01010101, 0x01010101, 0x01010101 }, /* STOMP_NONE */
{ 0x01017d01, 0x013b0101, 0x3b3b0101, 0x3b3b013b }, /* STOMP_LOW_FTP */
+ { 0xffffff01, 0xffffffff, 0xffffff01, 0xffffffff }, /* STOMP_AUDIO */
};
void ath9k_hw_init_btcoex_hw(struct ath_hw *ah, int qnum)
@@ -50,6 +50,7 @@ enum ath_stomp_type {
ATH_BTCOEX_STOMP_LOW,
ATH_BTCOEX_STOMP_NONE,
ATH_BTCOEX_STOMP_LOW_FTP,
+ ATH_BTCOEX_STOMP_AUDIO,
ATH_BTCOEX_STOMP_MAX
};
@@ -247,6 +247,9 @@ static void ath_btcoex_period_timer(unsigned long data)
stomp_type = ATH_BTCOEX_STOMP_ALL;
timer_period = btcoex->btscan_no_stomp;
}
+ } else if (btcoex->stomp_audio >= 5) {
+ stomp_type = ATH_BTCOEX_STOMP_AUDIO;
+ btcoex->stomp_audio = 0;
}
ath9k_hw_btcoex_bt_stomp(ah, stomp_type);
@@ -295,7 +298,7 @@ static void ath_btcoex_no_stomp_timer(void *arg)
(!(ah->caps.hw_caps & ATH9K_HW_CAP_MCI) &&
test_bit(BT_OP_SCAN, &btcoex->op_flags)))
ath9k_hw_btcoex_bt_stomp(ah, ATH_BTCOEX_STOMP_NONE);
- else if (btcoex->bt_stomp_type == ATH_BTCOEX_STOMP_ALL)
+ else if (btcoex->bt_stomp_type == ATH_BTCOEX_STOMP_ALL)
ath9k_hw_btcoex_bt_stomp(ah, ATH_BTCOEX_STOMP_LOW);
ath9k_hw_btcoex_enable(ah);
@@ -729,12 +729,30 @@ void ath9k_mci_set_txpower(struct ath_softc *sc, bool setchannel,
ath9k_hw_set_txpowerlimit(ah, sc->config.txpowlimit, false);
}
+static void ath9k_mci_stomp_audio(struct ath_softc *sc)
+{
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_btcoex *btcoex = &sc->btcoex;
+ struct ath_mci_profile *mci = &btcoex->mci;
+
+ if (!mci->num_sco && !mci->num_a2dp)
+ return;
+
+ if (ah->stats.avgbrssi > 25) {
+ btcoex->stomp_audio = 0;
+ return;
+ }
+
+ btcoex->stomp_audio++;
+}
void ath9k_mci_update_rssi(struct ath_softc *sc)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_btcoex *btcoex = &sc->btcoex;
struct ath9k_hw_mci *mci_hw = &sc->sc_ah->btcoex_hw.mci;
+ ath9k_mci_stomp_audio(sc);
+
if (!(mci_hw->config & ATH_MCI_CONFIG_CONCUR_TX))
return;
On lower WLAN signal strength, WLAN downlink traffic might suffer from retransmissions. At the mean time, playing SCO/A2DP profiles is affecting WLAN stability. In such scenario, by stomping SCO/A2DP BT traffic completely for a BTCOEX period, gives WLAN traffic an oppertunity to recover PHY rate. It also improves WLAN stability at lower RSSI without sacificing BT traffic. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> --- drivers/net/wireless/ath/ath9k/ath9k.h | 1 + drivers/net/wireless/ath/ath9k/btcoex.c | 1 + drivers/net/wireless/ath/ath9k/btcoex.h | 1 + drivers/net/wireless/ath/ath9k/gpio.c | 5 ++++- drivers/net/wireless/ath/ath9k/mci.c | 18 ++++++++++++++++++ 5 files changed, 25 insertions(+), 1 deletion(-)