@@ -90,8 +90,8 @@
static bool check_vif_up(struct brcmf_cfg80211_vif *vif)
{
if (!test_bit(BRCMF_VIF_STATUS_READY, &vif->sme_state)) {
- WL_INFO("device is not ready : status (%lu)\n",
- vif->sme_state);
+ brcmf_dbg(INFO, "device is not ready : status (%lu)\n",
+ vif->sme_state);
return false;
}
return true;
@@ -477,7 +477,7 @@ brcmf_cfg80211_change_iface(struct wiphy *wiphy, struct net_device *ndev,
if (ap) {
set_bit(BRCMF_VIF_STATUS_AP_CREATING, &vif->sme_state);
- WL_INFO("IF Type = AP\n");
+ brcmf_dbg(INFO, "IF Type = AP\n");
} else {
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_INFRA, infra);
if (err) {
@@ -485,8 +485,8 @@ brcmf_cfg80211_change_iface(struct wiphy *wiphy, struct net_device *ndev,
err = -EAGAIN;
goto done;
}
- WL_INFO("IF Type = %s\n", (vif->mode == WL_MODE_IBSS) ?
- "Adhoc" : "Infra");
+ brcmf_dbg(INFO, "IF Type = %s\n", (vif->mode == WL_MODE_IBSS) ?
+ "Adhoc" : "Infra");
}
ndev->ieee80211_ptr->iftype = type;
@@ -507,7 +507,7 @@ static void brcmf_set_mpc(struct net_device *ndev, int mpc)
brcmf_err("fail to set mpc\n");
return;
}
- WL_INFO("MPC : %d\n", mpc);
+ brcmf_dbg(INFO, "MPC : %d\n", mpc);
}
}
@@ -685,7 +685,7 @@ brcmf_run_escan(struct brcmf_cfg80211_info *cfg, struct net_device *ndev,
params, params_size);
if (err) {
if (err == -EBUSY)
- WL_INFO("system busy : escan canceled\n");
+ brcmf_dbg(INFO, "system busy : escan canceled\n");
else
brcmf_err("error (%d)\n", err);
}
@@ -804,8 +804,8 @@ brcmf_cfg80211_escan(struct wiphy *wiphy, struct net_device *ndev,
&sr->ssid_le, sizeof(sr->ssid_le));
if (err) {
if (err == -EBUSY)
- WL_INFO("BUSY: scan for \"%s\" canceled\n",
- sr->ssid_le.SSID);
+ brcmf_dbg(INFO, "BUSY: scan for \"%s\" canceled\n",
+ sr->ssid_le.SSID);
else
brcmf_err("WLC_SCAN error (%d)\n", err);
@@ -966,7 +966,7 @@ static void brcmf_link_down(struct brcmf_cfg80211_vif *vif)
WL_TRACE("Enter\n");
if (test_bit(BRCMF_VIF_STATUS_CONNECTED, &vif->sme_state)) {
- WL_INFO("Call WLC_DISASSOC to stop excess roaming\n ");
+ brcmf_dbg(INFO, "Call WLC_DISASSOC to stop excess roaming\n ");
err = brcmf_fil_cmd_data_set(vif->ifp,
BRCMF_C_DISASSOC, NULL, 0);
if (err)
@@ -1425,7 +1425,7 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev,
} else
cfg->channel = 0;
- WL_INFO("ie (%p), ie_len (%zd)\n", sme->ie, sme->ie_len);
+ brcmf_dbg(INFO, "ie (%p), ie_len (%zd)\n", sme->ie, sme->ie_len);
err = brcmf_set_wpa_version(ndev, sme);
if (err) {
@@ -1889,7 +1889,7 @@ static s32
brcmf_cfg80211_config_default_mgmt_key(struct wiphy *wiphy,
struct net_device *ndev, u8 key_idx)
{
- WL_INFO("Not supported\n");
+ brcmf_dbg(INFO, "Not supported\n");
return -EOPNOTSUPP;
}
@@ -1989,12 +1989,12 @@ brcmf_cfg80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *ndev,
cfg->pwr_save = enabled;
if (!check_vif_up(ifp->vif)) {
- WL_INFO("Device is not ready, storing the value in cfg_info struct\n");
+ brcmf_dbg(INFO, "Device is not ready, storing the value in cfg_info struct\n");
goto done;
}
pm = enabled ? PM_FAST : PM_OFF;
- WL_INFO("power save %s\n", (pm ? "enabled" : "disabled"));
+ brcmf_dbg(INFO, "power save %s\n", (pm ? "enabled" : "disabled"));
err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM, pm);
if (err) {
@@ -4351,7 +4351,7 @@ brcmf_dongle_roam(struct net_device *ndev, u32 roamvar, u32 bcn_timeout)
* Enable/Disable built-in roaming to allow supplicant
* to take care of roaming
*/
- WL_INFO("Internal Roaming = %s\n", roamvar ? "Off" : "On");
+ brcmf_dbg(INFO, "Internal Roaming = %s\n", roamvar ? "Off" : "On");
err = brcmf_fil_iovar_int_set(ifp, "roam_off", roamvar);
if (err) {
brcmf_err("roam_off error (%d)\n", err);
@@ -4391,7 +4391,7 @@ brcmf_dongle_scantime(struct net_device *ndev, s32 scan_assoc_time,
scan_assoc_time);
if (err) {
if (err == -EOPNOTSUPP)
- WL_INFO("Scan assoc time is not supported\n");
+ brcmf_dbg(INFO, "Scan assoc time is not supported\n");
else
brcmf_err("Scan assoc time error (%d)\n", err);
goto dongle_scantime_out;
@@ -4400,7 +4400,7 @@ brcmf_dongle_scantime(struct net_device *ndev, s32 scan_assoc_time,
scan_unassoc_time);
if (err) {
if (err == -EOPNOTSUPP)
- WL_INFO("Scan unassoc time is not supported\n");
+ brcmf_dbg(INFO, "Scan unassoc time is not supported\n");
else
brcmf_err("Scan unassoc time error (%d)\n", err);
goto dongle_scantime_out;
@@ -4410,7 +4410,7 @@ brcmf_dongle_scantime(struct net_device *ndev, s32 scan_assoc_time,
scan_passive_time);
if (err) {
if (err == -EOPNOTSUPP)
- WL_INFO("Scan passive time is not supported\n");
+ brcmf_dbg(INFO, "Scan passive time is not supported\n");
else
brcmf_err("Scan passive time error (%d)\n", err);
goto dongle_scantime_out;
@@ -4436,7 +4436,7 @@ static s32 wl_update_wiphybands(struct brcmf_cfg80211_info *cfg)
}
phy = ((char *)&phy_list)[0];
- WL_INFO("%c phy\n", phy);
+ brcmf_dbg(INFO, "%c phy\n", phy);
if (phy == 'n' || phy == 'a') {
wiphy = cfg_to_wiphy(cfg);
wiphy->bands[IEEE80211_BAND_5GHZ] = &__wl_band_5ghz_n;
@@ -4471,8 +4471,8 @@ static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg)
power_mode);
if (err)
goto default_conf_out;
- WL_INFO("power save set to %s\n",
- (power_mode ? "enabled" : "disabled"));
+ brcmf_dbg(INFO, "power save set to %s\n",
+ (power_mode ? "enabled" : "disabled"));
err = brcmf_dongle_roam(ndev, (cfg->roam_on ? 0 : 1),
WL_BEACON_TIMEOUT);
@@ -19,7 +19,6 @@
#include "dhd_dbg.h"
-#define WL_INFO(fmt, ...) brcmf_dbg(INFO, fmt, ##__VA_ARGS__)
#define WL_TRACE(fmt, ...) brcmf_dbg(TRACE, fmt, ##__VA_ARGS__)
#define WL_SCAN(fmt, ...) brcmf_dbg(SCAN, fmt, ##__VA_ARGS__)
#define WL_CONN(fmt, ...) brcmf_dbg(CONN, fmt, ##__VA_ARGS__)