new file mode 100644
@@ -0,0 +1,409 @@
+/*
+ * Mac80211 SDIO driver for ST-Ericsson CW1200 device
+ *
+ * Copyright (c) 2010, ST-Ericsson
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/sdio.h>
+#include <net/mac80211.h>
+
+#include "cw1200.h"
+#include "sbus.h"
+#include <linux/cw1200_platform.h>
+#include "hwio.h"
+
+MODULE_AUTHOR("Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com>");
+MODULE_DESCRIPTION("mac80211 ST-Ericsson CW1200 SDIO driver");
+MODULE_LICENSE("GPL");
+
+#define SDIO_BLOCK_SIZE (512)
+
+struct sbus_priv {
+ struct sdio_func *func;
+ struct cw1200_common *core;
+ const struct cw1200_platform_data_sdio *pdata;
+};
+
+#ifndef SDIO_VENDOR_ID_STE
+#define SDIO_VENDOR_ID_STE 0x0020
+#endif
+
+#ifndef SDIO_DEVICE_ID_STE_CW1200
+#define SDIO_DEVICE_ID_STE_CW1200 0x2280
+#endif
+
+static const struct sdio_device_id cw1200_sdio_ids[] = {
+ { SDIO_DEVICE(SDIO_VENDOR_ID_STE, SDIO_DEVICE_ID_STE_CW1200) },
+ { /* end: all zeroes */ },
+};
+
+/* sbus_ops implemetation */
+
+static int cw1200_sdio_memcpy_fromio(struct sbus_priv *self,
+ unsigned int addr,
+ void *dst, int count)
+{
+ return sdio_memcpy_fromio(self->func, dst, addr, count);
+}
+
+static int cw1200_sdio_memcpy_toio(struct sbus_priv *self,
+ unsigned int addr,
+ const void *src, int count)
+{
+ return sdio_memcpy_toio(self->func, addr, (void *)src, count);
+}
+
+static void cw1200_sdio_lock(struct sbus_priv *self)
+{
+ sdio_claim_host(self->func);
+}
+
+static void cw1200_sdio_unlock(struct sbus_priv *self)
+{
+ sdio_release_host(self->func);
+}
+
+static void cw1200_sdio_irq_handler(struct sdio_func *func)
+{
+ struct sbus_priv *self = sdio_get_drvdata(func);
+
+ /* note: sdio_host already claimed here. */
+ if (self->core)
+ cw1200_irq_handler(self->core);
+}
+
+static irqreturn_t cw1200_gpio_hardirq(int irq, void *dev_id)
+{
+ return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t cw1200_gpio_irq(int irq, void *dev_id)
+{
+ struct sbus_priv *self = dev_id;
+
+ if (self->core) {
+ sdio_claim_host(self->func);
+ cw1200_irq_handler(self->core);
+ sdio_release_host(self->func);
+ return IRQ_HANDLED;
+ } else {
+ return IRQ_NONE;
+ }
+}
+
+static int cw1200_request_irq(struct sbus_priv *self)
+{
+ int ret;
+ const struct resource *irq = self->pdata->irq;
+ u8 cccr;
+
+ cccr = sdio_f0_readb(self->func, SDIO_CCCR_IENx, &ret);
+ if (WARN_ON(ret))
+ goto err;
+
+ /* Master interrupt enable ... */
+ cccr |= BIT(0);
+
+ /* ... for our function */
+ cccr |= BIT(self->func->num);
+
+ sdio_f0_writeb(self->func, cccr, SDIO_CCCR_IENx, &ret);
+ if (WARN_ON(ret))
+ goto err;
+
+ ret = enable_irq_wake(irq->start);
+ if (WARN_ON(ret))
+ goto err;
+
+ /* Request the IRQ */
+ ret = request_threaded_irq(irq->start, cw1200_gpio_hardirq,
+ cw1200_gpio_irq,
+ IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+ irq->name, self);
+ if (WARN_ON(ret))
+ goto err;
+
+ return 0;
+
+err:
+ return ret;
+}
+
+static int cw1200_sdio_irq_subscribe(struct sbus_priv *self)
+{
+ int ret = 0;
+
+ pr_debug("SW IRQ subscribe\n");
+ sdio_claim_host(self->func);
+ if (self->pdata->irq)
+ ret = cw1200_request_irq(self);
+ else
+ ret = sdio_claim_irq(self->func, cw1200_sdio_irq_handler);
+
+ sdio_release_host(self->func);
+ return ret;
+}
+
+static int cw1200_sdio_irq_unsubscribe(struct sbus_priv *self)
+{
+ int ret = 0;
+
+ pr_debug("SW IRQ unsubscribe\n");
+
+ if (self->pdata->irq) {
+ disable_irq_wake(self->pdata->irq->start);
+ free_irq(self->pdata->irq->start, self);
+ } else {
+ sdio_claim_host(self->func);
+ ret = sdio_release_irq(self->func);
+ sdio_release_host(self->func);
+ }
+ return ret;
+}
+
+static int cw1200_sdio_off(const struct cw1200_platform_data_sdio *pdata)
+{
+ const struct resource *reset = pdata->reset;
+
+ if (reset) {
+ gpio_set_value(reset->start, 0);
+ msleep(30); /* Min is 2 * CLK32K cycles */
+ gpio_free(reset->start);
+ }
+
+ if (pdata->power_ctrl)
+ pdata->power_ctrl(pdata, false);
+ if (pdata->clk_ctrl)
+ pdata->clk_ctrl(pdata, false);
+
+ return 0;
+}
+
+static int cw1200_sdio_on(const struct cw1200_platform_data_sdio *pdata)
+{
+ const struct resource *reset = pdata->reset;
+ const struct resource *powerup = pdata->reset;
+
+ /* Ensure I/Os are pulled low */
+ if (reset) {
+ gpio_request(reset->start, reset->name);
+ gpio_direction_output(reset->start, 0);
+ }
+ if (powerup) {
+ gpio_request(powerup->start, powerup->name);
+ gpio_direction_output(powerup->start, 0);
+ }
+ if (reset || powerup)
+ msleep(50); /* Settle time */
+
+ /* Enable 3v3 and 1v8 to hardware */
+ if (pdata->power_ctrl) {
+ if (pdata->power_ctrl(pdata, true)) {
+ pr_err("power_ctrl() failed!\n");
+ return -1;
+ }
+ }
+
+ /* Enable CLK32K */
+ if (pdata->clk_ctrl) {
+ if (pdata->clk_ctrl(pdata, true)) {
+ pr_err("clk_ctrl() failed!\n");
+ return -1;
+ }
+ msleep(10); /* Delay until clock is stable for 2 cycles */
+ }
+
+ /* Enable POWERUP signal */
+ if (powerup) {
+ gpio_set_value(powerup->start, 1);
+ msleep(250); /* or more..? */
+ }
+ /* Enable RSTn signal */
+ if (reset) {
+ gpio_set_value(reset->start, 1);
+ msleep(50); /* Or more..? */
+ }
+ return 0;
+}
+
+static size_t cw1200_sdio_align_size(struct sbus_priv *self, size_t size)
+{
+ if (self->pdata->no_nptb)
+ size = round_up(size, SDIO_BLOCK_SIZE);
+ else
+ size = sdio_align_size(self->func, size);
+
+ return size;
+}
+
+static int cw1200_sdio_pm(struct sbus_priv *self, bool suspend)
+{
+ int ret = 0;
+
+ if (self->pdata->irq)
+ ret = irq_set_irq_wake(self->pdata->irq->start, suspend);
+ return ret;
+}
+
+static struct sbus_ops cw1200_sdio_sbus_ops = {
+ .sbus_memcpy_fromio = cw1200_sdio_memcpy_fromio,
+ .sbus_memcpy_toio = cw1200_sdio_memcpy_toio,
+ .lock = cw1200_sdio_lock,
+ .unlock = cw1200_sdio_unlock,
+ .align_size = cw1200_sdio_align_size,
+ .power_mgmt = cw1200_sdio_pm,
+};
+
+/* Probe Function to be called by SDIO stack when device is discovered */
+static int cw1200_sdio_probe(struct sdio_func *func,
+ const struct sdio_device_id *id)
+{
+ struct sbus_priv *self;
+ int status;
+
+ pr_info("cw1200_wlan_sdio: Probe called\n");
+
+ /* We are only able to handle the wlan function */
+ if (func->num != 0x01)
+ return -ENODEV;
+
+ self = kzalloc(sizeof(*self), GFP_KERNEL);
+ if (!self) {
+ pr_err("Can't allocate SDIO sbus_priv.\n");
+ return -ENOMEM;
+ }
+
+ func->card->quirks |= MMC_QUIRK_LENIENT_FN0;
+
+ self->pdata = cw1200_get_platform_data();
+ self->func = func;
+ sdio_set_drvdata(func, self);
+ sdio_claim_host(func);
+ sdio_enable_func(func);
+ sdio_release_host(func);
+
+ status = cw1200_sdio_irq_subscribe(self);
+
+ status = cw1200_core_probe(&cw1200_sdio_sbus_ops,
+ self, &func->dev, &self->core,
+ self->pdata->ref_clk,
+ self->pdata->macaddr,
+ self->pdata->sdd_file,
+ self->pdata->have_5ghz);
+ if (status) {
+ cw1200_sdio_irq_unsubscribe(self);
+ sdio_claim_host(func);
+ sdio_disable_func(func);
+ sdio_release_host(func);
+ sdio_set_drvdata(func, NULL);
+ kfree(self);
+ }
+
+ return status;
+}
+
+/* Disconnect Function to be called by SDIO stack when
+ * device is disconnected */
+static void cw1200_sdio_disconnect(struct sdio_func *func)
+{
+ struct sbus_priv *self = sdio_get_drvdata(func);
+
+ if (self) {
+ cw1200_sdio_irq_unsubscribe(self);
+ if (self->core) {
+ cw1200_core_release(self->core);
+ self->core = NULL;
+ }
+ sdio_claim_host(func);
+ sdio_disable_func(func);
+ sdio_release_host(func);
+ sdio_set_drvdata(func, NULL);
+ kfree(self);
+ }
+}
+
+static int cw1200_sdio_suspend(struct device *dev)
+{
+ int ret;
+ struct sdio_func *func = dev_to_sdio_func(dev);
+ struct sbus_priv *self = sdio_get_drvdata(func);
+
+ if (!cw1200_can_suspend(self->core))
+ return -EAGAIN;
+
+ /* Notify SDIO that CW1200 will remain powered during suspend */
+ ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
+ if (ret)
+ pr_err("Error setting SDIO pm flags: %i\n", ret);
+
+ return ret;
+}
+
+static int cw1200_sdio_resume(struct device *dev)
+{
+ return 0;
+}
+
+static const struct dev_pm_ops cw1200_pm_ops = {
+ .suspend = cw1200_sdio_suspend,
+ .resume = cw1200_sdio_resume,
+};
+
+static struct sdio_driver sdio_driver = {
+ .name = "cw1200_wlan_sdio",
+ .id_table = cw1200_sdio_ids,
+ .probe = cw1200_sdio_probe,
+ .remove = cw1200_sdio_disconnect,
+ .drv = {
+ .pm = &cw1200_pm_ops,
+ }
+};
+
+/* Init Module function -> Called by insmod */
+static int __init cw1200_sdio_init(void)
+{
+ const struct cw1200_platform_data_sdio *pdata;
+ int ret;
+
+ pdata = cw1200_get_platform_data();
+
+ if (cw1200_sdio_on(pdata)) {
+ ret = -1;
+ goto err;
+ }
+
+ ret = sdio_register_driver(&sdio_driver);
+ if (ret)
+ goto err;
+
+ return 0;
+
+err:
+ cw1200_sdio_off(pdata);
+ return ret;
+}
+
+/* Called at Driver Unloading */
+static void __exit cw1200_sdio_exit(void)
+{
+ const struct cw1200_platform_data_sdio *pdata;
+ pdata = cw1200_get_platform_data();
+ sdio_unregister_driver(&sdio_driver);
+ cw1200_sdio_off(pdata);
+}
+
+
+module_init(cw1200_sdio_init);
+module_exit(cw1200_sdio_exit);
new file mode 100644
@@ -0,0 +1,470 @@
+/*
+ * Mac80211 SPI driver for ST-Ericsson CW1200 device
+ *
+ * Copyright (c) 2011, Sagrad Inc.
+ * Author: Solomon Peachy <speachy@sagrad.com>
+ *
+ * Based on cw1200_sdio.c
+ * Copyright (c) 2010, ST-Ericsson
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <net/mac80211.h>
+
+#include <linux/spi/spi.h>
+#include <linux/device.h>
+
+#include "cw1200.h"
+#include "sbus.h"
+#include <linux/cw1200_platform.h>
+#include "hwio.h"
+
+MODULE_AUTHOR("Solomon Peachy <speachy@sagrad.com>");
+MODULE_DESCRIPTION("mac80211 ST-Ericsson CW1200 SPI driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:cw1200_wlan_spi");
+
+struct sbus_priv {
+ struct spi_device *func;
+ struct cw1200_common *core;
+ const struct cw1200_platform_data_spi *pdata;
+ spinlock_t lock;
+ int claimed;
+};
+
+#define SDIO_TO_SPI_ADDR(addr) ((addr & 0x1f)>>2)
+#define SET_WRITE 0x7FFF /* usage: and operation */
+#define SET_READ 0x8000 /* usage: or operation */
+
+/*
+ Notes on byte ordering:
+ LE: B0 B1 B2 B3
+ BE: B3 B2 B1 B0
+
+ Hardware expects 32-bit data to be written as 16-bit BE words:
+
+ B1 B0 B3 B2
+
+*/
+
+static int cw1200_spi_memcpy_fromio(struct sbus_priv *self,
+ unsigned int addr,
+ void *dst, int count)
+{
+ int ret, i;
+ uint16_t regaddr;
+ struct spi_message m;
+
+ struct spi_transfer t_addr = {
+ .tx_buf = ®addr,
+ .len = sizeof(regaddr),
+ };
+ struct spi_transfer t_msg = {
+ .rx_buf = dst,
+ .len = count,
+ };
+
+ regaddr = (SDIO_TO_SPI_ADDR(addr))<<12;
+ regaddr |= SET_READ;
+ regaddr |= (count>>1);
+ regaddr = cpu_to_le16(regaddr);
+
+ /* pr_info("READ : %04d from 0x%02x (%04x)\n", count, addr, le16_to_cpu(regaddr)); */
+
+#if defined(__LITTLE_ENDIAN)
+ /* We have to byteswap if the SPI bus is limited to 8b operation */
+ if (self->func->bits_per_word == 8)
+#endif
+ regaddr = swab16(regaddr);
+
+ spi_message_init(&m);
+ spi_message_add_tail(&t_addr, &m);
+ spi_message_add_tail(&t_msg, &m);
+ ret = spi_sync(self->func, &m);
+
+#if 0
+ pr_info("READ : ");
+ for (i = 0; i < t_addr.len; i++)
+ printk("%02x ", ((u8 *)t_addr.tx_buf)[i]);
+ printk(" : ");
+ for (i = 0; i < t_msg.len; i++)
+ printk("%02x ", ((u8 *)t_msg.rx_buf)[i]);
+ printk("\n");
+#endif
+
+#if defined(__LITTLE_ENDIAN)
+ /* We have to byteswap if the SPI bus is limited to 8b operation */
+ if (self->func->bits_per_word == 8)
+#endif
+ {
+ uint16_t *buf = (uint16_t *)dst;
+ for (i = 0; i < ((count + 1) >> 1); i++)
+ buf[i] = swab16(buf[i]);
+ }
+
+ return ret;
+}
+
+static int cw1200_spi_memcpy_toio(struct sbus_priv *self,
+ unsigned int addr,
+ const void *src, int count)
+{
+ int rval, i;
+ uint16_t regaddr;
+ struct spi_transfer t_addr = {
+ .tx_buf = ®addr,
+ .len = sizeof(regaddr),
+ };
+ struct spi_transfer t_msg = {
+ .tx_buf = src,
+ .len = count,
+ };
+ struct spi_message m;
+
+ regaddr = (SDIO_TO_SPI_ADDR(addr))<<12;
+ regaddr &= SET_WRITE;
+ regaddr |= (count>>1);
+ regaddr = cpu_to_le16(regaddr);
+
+ /* pr_info("WRITE: %04d to 0x%02x (%04x)\n", count, addr, le16_to_cpu(regaddr)); */
+
+#if defined(__LITTLE_ENDIAN)
+ /* We have to byteswap if the SPI bus is limited to 8b operation */
+ if (self->func->bits_per_word == 8)
+#endif
+ {
+ uint16_t *buf = (uint16_t *)src;
+ regaddr = swab16(regaddr);
+ for (i = 0; i < ((count + 1) >> 1); i++)
+ buf[i] = swab16(buf[i]);
+ }
+
+#if 0
+ pr_info("WRITE: ");
+ for (i = 0; i < t_addr.len; i++)
+ printk("%02x ", ((u8 *)t_addr.tx_buf)[i]);
+ printk(" : ");
+ for (i = 0; i < t_msg.len; i++)
+ printk("%02x ", ((u8 *)t_msg.tx_buf)[i]);
+ printk("\n");
+#endif
+
+ spi_message_init(&m);
+ spi_message_add_tail(&t_addr, &m);
+ spi_message_add_tail(&t_msg, &m);
+ rval = spi_sync(self->func, &m);
+
+#if 0
+ pr_info("WROTE: %d\n", m.actual_length);
+#endif
+
+#if defined(__LITTLE_ENDIAN)
+ /* We have to byteswap if the SPI bus is limited to 8b operation */
+ if (self->func->bits_per_word == 8)
+#endif
+ {
+ uint16_t *buf = (uint16_t *)src;
+ for (i = 0; i < ((count + 1) >> 1); i++)
+ buf[i] = swab16(buf[i]);
+ }
+ return rval;
+}
+
+static void cw1200_spi_lock(struct sbus_priv *self)
+{
+ unsigned long flags;
+
+ might_sleep();
+
+ spin_lock_irqsave(&self->lock, flags);
+ while (1) {
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ if (!self->claimed)
+ break;
+ spin_unlock_irqrestore(&self->lock, flags);
+ schedule();
+ spin_lock_irqsave(&self->lock, flags);
+ }
+ set_current_state(TASK_RUNNING);
+ self->claimed = 1;
+ spin_unlock_irqrestore(&self->lock, flags);
+
+ return;
+}
+
+static void cw1200_spi_unlock(struct sbus_priv *self)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&self->lock, flags);
+ self->claimed = 0;
+ spin_unlock_irqrestore(&self->lock, flags);
+ return;
+}
+
+static irqreturn_t cw1200_spi_irq_handler(int irq, void *dev_id)
+{
+ struct sbus_priv *self = dev_id;
+
+ if (self->core) {
+ cw1200_irq_handler(self->core);
+ return IRQ_HANDLED;
+ } else {
+ return IRQ_NONE;
+ }
+}
+
+static int cw1200_spi_irq_subscribe(struct sbus_priv *self)
+{
+ int ret;
+
+ pr_debug("SW IRQ subscribe\n");
+
+ ret = request_any_context_irq(self->func->irq, cw1200_spi_irq_handler,
+ IRQF_TRIGGER_HIGH,
+ "cw1200_wlan_irq", self);
+ if (WARN_ON(ret < 0))
+ goto exit;
+
+ ret = enable_irq_wake(self->func->irq);
+ if (WARN_ON(ret))
+ goto free_irq;
+
+ return 0;
+
+free_irq:
+ free_irq(self->func->irq, self);
+exit:
+ return ret;
+}
+
+static int cw1200_spi_irq_unsubscribe(struct sbus_priv *self)
+{
+ int ret = 0;
+
+ pr_debug("SW IRQ unsubscribe\n");
+ disable_irq_wake(self->func->irq);
+ free_irq(self->func->irq, self);
+
+ return ret;
+}
+
+static int cw1200_spi_off(const struct cw1200_platform_data_spi *pdata)
+{
+ const struct resource *reset = pdata->reset;
+
+ if (reset) {
+ gpio_set_value(reset->start, 0);
+ msleep(30); /* Min is 2 * CLK32K cycles */
+ gpio_free(reset->start);
+ }
+
+ if (pdata->power_ctrl)
+ pdata->power_ctrl(pdata, false);
+ if (pdata->clk_ctrl)
+ pdata->clk_ctrl(pdata, false);
+
+ return 0;
+}
+
+static int cw1200_spi_on(const struct cw1200_platform_data_spi *pdata)
+{
+ const struct resource *reset = pdata->reset;
+ const struct resource *powerup = pdata->reset;
+
+ /* Ensure I/Os are pulled low */
+ if (reset) {
+ gpio_request(reset->start, reset->name);
+ gpio_direction_output(reset->start, 0);
+ }
+ if (powerup) {
+ gpio_request(powerup->start, powerup->name);
+ gpio_direction_output(powerup->start, 0);
+ }
+ if (reset || powerup)
+ msleep(10); /* Settle time? */
+
+ /* Enable 3v3 and 1v8 to hardware */
+ if (pdata->power_ctrl) {
+ if (pdata->power_ctrl(pdata, true)) {
+ pr_err("power_ctrl() failed!\n");
+ return -1;
+ }
+ }
+
+ /* Enable CLK32K */
+ if (pdata->clk_ctrl) {
+ if (pdata->clk_ctrl(pdata, true)) {
+ pr_err("clk_ctrl() failed!\n");
+ return -1;
+ }
+ msleep(10); /* Delay until clock is stable for 2 cycles */
+ }
+
+ /* Enable POWERUP signal */
+ if (powerup) {
+ gpio_set_value(powerup->start, 1);
+ msleep(250); /* or more..? */
+ }
+ /* Enable RSTn signal */
+ if (reset) {
+ gpio_set_value(reset->start, 1);
+ msleep(50); /* Or more..? */
+ }
+ return 0;
+}
+
+static size_t cw1200_spi_align_size(struct sbus_priv *self, size_t size)
+{
+ return size & 1 ? size + 1 : size;
+}
+
+static int cw1200_spi_pm(struct sbus_priv *self, bool suspend)
+{
+ return irq_set_irq_wake(self->func->irq, suspend);
+}
+
+static struct sbus_ops cw1200_spi_sbus_ops = {
+ .sbus_memcpy_fromio = cw1200_spi_memcpy_fromio,
+ .sbus_memcpy_toio = cw1200_spi_memcpy_toio,
+ .lock = cw1200_spi_lock,
+ .unlock = cw1200_spi_unlock,
+ .align_size = cw1200_spi_align_size,
+ .power_mgmt = cw1200_spi_pm,
+};
+
+/* Probe Function to be called by SPI stack when device is discovered */
+static int cw1200_spi_probe(struct spi_device *func)
+{
+ const struct cw1200_platform_data_spi *plat_data = func->dev.platform_data;
+ struct sbus_priv *self;
+ int status;
+
+ /* Sanity check speed */
+ if (func->max_speed_hz > 52000000)
+ func->max_speed_hz = 52000000;
+ if (func->max_speed_hz < 1000000)
+ func->max_speed_hz = 1000000;
+
+ /* Fix up transfer size */
+ if (plat_data->spi_bits_per_word)
+ func->bits_per_word = plat_data->spi_bits_per_word;
+ if (!func->bits_per_word)
+ func->bits_per_word = 16;
+
+ /* And finally.. */
+ func->mode = SPI_MODE_0;
+
+ pr_info("cw1200_wlan_spi: Probe called (CS %d M %d BPW %d CLK %d)\n",
+ func->chip_select, func->mode, func->bits_per_word, func->max_speed_hz);
+
+ if (cw1200_spi_on(plat_data)) {
+ pr_err("spi_on() failed!\n");
+ return -1;
+ }
+
+ if (spi_setup(func)) {
+ pr_err("spi_setup() failed!\n");
+ return -1;
+ }
+
+ self = kzalloc(sizeof(*self), GFP_KERNEL);
+ if (!self) {
+ pr_err("Can't allocate SPI sbus_priv.");
+ return -ENOMEM;
+ }
+
+ self->pdata = plat_data;
+ self->func = func;
+ spin_lock_init(&self->lock);
+
+ spi_set_drvdata(func, self);
+
+ status = cw1200_spi_irq_subscribe(self);
+
+ status = cw1200_core_probe(&cw1200_spi_sbus_ops,
+ self, &func->dev, &self->core,
+ self->pdata->ref_clk,
+ self->pdata->macaddr,
+ self->pdata->sdd_file,
+ self->pdata->have_5ghz);
+
+ if (status) {
+ cw1200_spi_irq_unsubscribe(self);
+ cw1200_spi_off(plat_data);
+ kfree(self);
+ }
+
+ return status;
+}
+
+/* Disconnect Function to be called by SPI stack when device is disconnected */
+static int cw1200_spi_disconnect(struct spi_device *func)
+{
+ struct sbus_priv *self = spi_get_drvdata(func);
+
+ if (self) {
+ cw1200_spi_irq_unsubscribe(self);
+ if (self->core) {
+ cw1200_core_release(self->core);
+ self->core = NULL;
+ }
+ kfree(self);
+ }
+ cw1200_spi_off(func->dev.platform_data);
+
+ return 0;
+}
+
+static int cw1200_spi_suspend(struct device *dev, pm_message_t state)
+{
+ struct sbus_priv *self = spi_get_drvdata(to_spi_device(dev));
+
+ if (!cw1200_can_suspend(self->core))
+ return -EAGAIN;
+
+ /* XXX notify host that we have to keep CW1200 powered on? */
+ return 0;
+}
+
+static int cw1200_spi_resume(struct device *dev)
+{
+ return 0;
+}
+
+static struct spi_driver spi_driver = {
+ .probe = cw1200_spi_probe,
+ .remove = cw1200_spi_disconnect,
+ .driver = {
+ .name = "cw1200_wlan_spi",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ .suspend = cw1200_spi_suspend,
+ .resume = cw1200_spi_resume,
+ },
+};
+
+/* Init Module function -> Called by insmod */
+static int __init cw1200_spi_init(void)
+{
+ return spi_register_driver(&spi_driver);
+}
+
+/* Called at Driver Unloading */
+static void __exit cw1200_spi_exit(void)
+{
+ spi_unregister_driver(&spi_driver);
+}
+
+module_init(cw1200_spi_init);
+module_exit(cw1200_spi_exit);
new file mode 100644
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef CW1200_PLAT_H_INCLUDED
+#define CW1200_PLAT_H_INCLUDED
+
+struct cw1200_platform_data_spi {
+ u8 spi_bits_per_word; /* REQUIRED */
+ u16 ref_clk; /* REQUIRED (in KHz) */
+
+ /* All others are optional */
+ bool have_5ghz;
+ const struct resource *reset; /* GPIO to RSTn signal */
+ const struct resource *powerup; /* GPIO to POWERUP signal */
+ int (*power_ctrl)(const struct cw1200_platform_data_spi *pdata,
+ bool enable); /* Control 3v3 / 1v8 supply */
+ int (*clk_ctrl)(const struct cw1200_platform_data_spi *pdata,
+ bool enable); /* Control CLK32K */
+ const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */
+ const char *sdd_file; /* if NULL, will use default for detected hw type */
+};
+
+struct cw1200_platform_data_sdio {
+ u16 ref_clk; /* REQUIRED (in KHz) */
+
+ /* All others are optional */
+ const struct resource *irq; /* if using GPIO for IRQ */
+ bool have_5ghz;
+ bool no_nptb; /* SDIO hardware does not support non-power-of-2-blocksizes */
+ const struct resource *reset; /* GPIO to RSTn signal */
+ const struct resource *powerup; /* GPIO to POWERUP signal */
+ int (*power_ctrl)(const struct cw1200_platform_data_sdio *pdata,
+ bool enable); /* Control 3v3 / 1v8 supply */
+ int (*clk_ctrl)(const struct cw1200_platform_data_sdio *pdata,
+ bool enable); /* Control CLK32K */
+ const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */
+ const char *sdd_file; /* if NULL, will use default for detected hw type */
+};
+
+const void *cw1200_get_platform_data(void);
+
+#endif /* CW1200_PLAT_H_INCLUDED */
Signed-off-by: Solomon Peachy <pizza@shaftnet.org> --- drivers/net/wireless/cw1200/cw1200_sdio.c | 415 ++++++++++++++++++++++++++ drivers/net/wireless/cw1200/cw1200_spi.c | 470 ++++++++++++++++++++++++++++++ include/linux/cw1200_platform.h | 46 +++ 3 files changed, 931 insertions(+) create mode 100644 drivers/net/wireless/cw1200/cw1200_sdio.c create mode 100644 drivers/net/wireless/cw1200/cw1200_spi.c create mode 100644 include/linux/cw1200_platform.h