@@ -539,6 +539,15 @@ brcms_ops_bss_info_changed(struct ieee80211_hw *hw,
spin_unlock_bh(&wl->lock);
}
+ if (changed & BSS_CHANGED_AP_PROBE_RESP) {
+ struct sk_buff *probe_resp;
+
+ spin_lock_bh(&wl->lock);
+ probe_resp = ieee80211_proberesp_get(hw, vif);
+ brcms_c_set_new_probe_resp(wl->wlc, probe_resp);
+ spin_unlock_bh(&wl->lock);
+ }
+
if (changed & BSS_CHANGED_BEACON_ENABLED) {
/* Beaconing should be enabled/disabled (beaconing modes) */
brcms_err(core, "%s: Beacon enabled: %s\n", __func__,
@@ -1038,6 +1047,8 @@ static int ieee_hw_init(struct ieee80211_hw *hw)
hw->channel_change_time = 7 * 1000;
hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+ hw->wiphy->flags |= WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD;
+
hw->rate_control_algorithm = "minstrel_ht";
hw->sta_data_size = 0;
@@ -451,6 +451,8 @@ static void brcms_c_detach_mfree(struct brcms_c_info *wlc)
kfree(wlc->hw);
if (wlc->beacon)
dev_kfree_skb_any(wlc->beacon);
+ if (wlc->probe_resp)
+ dev_kfree_skb_any(wlc->probe_resp);
/* free the wlc */
kfree(wlc);
@@ -7323,69 +7325,6 @@ brcms_c_mod_prb_rsp_rate_table(struct brcms_c_info *wlc, uint frame_len)
}
}
-/* Max buffering needed for beacon template/prb resp template is 142 bytes.
- *
- * PLCP header is 6 bytes.
- * 802.11 A3 header is 24 bytes.
- * Max beacon frame body template length is 112 bytes.
- * Max probe resp frame body template length is 110 bytes.
- *
- * *len on input contains the max length of the packet available.
- *
- * The *len value is set to the number of bytes in buf used, and starts
- * with the PLCP and included up to, but not including, the 4 byte FCS.
- */
-static void
-brcms_c_bcn_prb_template(struct brcms_c_info *wlc, u16 type,
- u32 bcn_rspec,
- struct brcms_bss_cfg *cfg, u16 *buf, int *len)
-{
- static const u8 ether_bcast[ETH_ALEN] = {255, 255, 255, 255, 255, 255};
- struct cck_phy_hdr *plcp;
- struct ieee80211_mgmt *h;
- int hdr_len, body_len;
-
- hdr_len = D11_PHY_HDR_LEN + DOT11_MAC_HDR_LEN;
-
- /* calc buffer size provided for frame body */
- body_len = *len - hdr_len;
- /* return actual size */
- *len = hdr_len + body_len;
-
- /* format PHY and MAC headers */
- memset(buf, 0, hdr_len);
-
- plcp = (struct cck_phy_hdr *) buf;
-
- /*
- * PLCP for Probe Response frames are filled in from
- * core's rate table
- */
- if (type == IEEE80211_STYPE_BEACON)
- /* fill in PLCP */
- brcms_c_compute_plcp(wlc, bcn_rspec,
- (DOT11_MAC_HDR_LEN + body_len + FCS_LEN),
- (u8 *) plcp);
-
- /* "Regular" and 16 MBSS but not for 4 MBSS */
- /* Update the phytxctl for the beacon based on the rspec */
- brcms_c_beacon_phytxctl_txant_upd(wlc, bcn_rspec);
-
- h = (struct ieee80211_mgmt *)&plcp[1];
-
- /* fill in 802.11 header */
- h->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | type);
-
- /* DUR is 0 for multicast bcn, or filled in by MAC for prb resp */
- /* A1 filled in by MAC for prb resp, broadcast for bcn */
- if (type == IEEE80211_STYPE_BEACON)
- memcpy(&h->da, ðer_bcast, ETH_ALEN);
- memcpy(&h->sa, &wlc->pub->cur_etheraddr, ETH_ALEN);
- memcpy(&h->bssid, &cfg->BSSID, ETH_ALEN);
-
- /* SEQ filled in by MAC */
-}
-
int brcms_c_get_header_len(void)
{
return TXOFF;
@@ -7527,6 +7466,20 @@ void brcms_c_set_new_beacon(struct brcms_c_info *wlc, struct sk_buff *beacon,
brcms_c_update_beacon(wlc);
}
+void brcms_c_set_new_probe_resp(struct brcms_c_info *wlc,
+ struct sk_buff *probe_resp)
+{
+ if (!probe_resp)
+ return;
+ if (wlc->probe_resp)
+ dev_kfree_skb_any(wlc->probe_resp);
+ wlc->probe_resp = probe_resp;
+
+ /* add PLCP */
+ skb_push(wlc->probe_resp, D11_PHY_HDR_LEN);
+ brcms_c_update_probe_resp(wlc, false);
+}
+
/* Write ssid into shared memory */
static void
brcms_c_shm_ssid_upd(struct brcms_c_info *wlc, struct brcms_bss_cfg *cfg)
@@ -7546,30 +7499,19 @@ brcms_c_shm_ssid_upd(struct brcms_c_info *wlc, struct brcms_bss_cfg *cfg)
static void
brcms_c_bss_update_probe_resp(struct brcms_c_info *wlc,
struct brcms_bss_cfg *cfg,
+ struct sk_buff *probe_resp,
bool suspend)
{
- u16 *prb_resp;
- int len = BCN_TMPL_LEN;
+ int len;
- prb_resp = kmalloc(BCN_TMPL_LEN, GFP_ATOMIC);
- if (!prb_resp)
- return;
-
- /*
- * write the probe response to hardware, or save in
- * the config structure
- */
-
- /* create the probe response template */
- brcms_c_bcn_prb_template(wlc, IEEE80211_STYPE_PROBE_RESP, 0,
- cfg, prb_resp, &len);
+ len = min_t(size_t, probe_resp->len, BCN_TMPL_LEN);
if (suspend)
brcms_c_suspend_mac_and_wait(wlc);
/* write the probe response into the template region */
brcms_b_write_template_ram(wlc->hw, T_PRS_TPL_BASE,
- (len + 3) & ~3, prb_resp);
+ (len + 3) & ~3, probe_resp->data);
/* write the length of the probe response frame (+PLCP/-FCS) */
brcms_b_write_shm(wlc->hw, M_PRB_RESP_FRM_LEN, (u16) len);
@@ -7583,13 +7525,11 @@ brcms_c_bss_update_probe_resp(struct brcms_c_info *wlc,
* PLCP header for the call to brcms_c_mod_prb_rsp_rate_table()
* by subtracting the PLCP len and adding the FCS.
*/
- len += (-D11_PHY_HDR_LEN + FCS_LEN);
- brcms_c_mod_prb_rsp_rate_table(wlc, (u16) len);
+ brcms_c_mod_prb_rsp_rate_table(wlc,
+ (u16)len + FCS_LEN - D11_PHY_HDR_LEN);
if (suspend)
brcms_c_enable_mac(wlc);
-
- kfree(prb_resp);
}
void brcms_c_update_probe_resp(struct brcms_c_info *wlc, bool suspend)
@@ -7598,8 +7538,12 @@ void brcms_c_update_probe_resp(struct brcms_c_info *wlc, bool suspend)
/* update AP or IBSS probe responses */
if (wlc->pub->up && (bsscfg->type == BRCMS_TYPE_AP ||
- bsscfg->type == BRCMS_TYPE_ADHOC))
- brcms_c_bss_update_probe_resp(wlc, bsscfg, suspend);
+ bsscfg->type == BRCMS_TYPE_ADHOC)) {
+ if (!wlc->probe_resp)
+ return;
+ brcms_c_bss_update_probe_resp(wlc, bsscfg, wlc->probe_resp,
+ suspend);
+ }
}
int brcms_b_xmtfifo_sz_get(struct brcms_hardware *wlc_hw, uint fifo,
@@ -567,6 +567,7 @@ struct brcms_c_info {
struct sk_buff *beacon;
u16 beacon_tim_offset;
u16 beacon_dtim_period;
+ struct sk_buff *probe_resp;
};
/* antsel module specific state */
@@ -336,6 +336,8 @@ extern void brcms_c_update_beacon(struct brcms_c_info *wlc);
extern void brcms_c_set_new_beacon(struct brcms_c_info *wlc,
struct sk_buff *beacon, u16 tim_offset,
u16 dtim_period);
+extern void brcms_c_set_new_probe_resp(struct brcms_c_info *wlc,
+ struct sk_buff *probe_resp);
extern void brcms_c_set_ssid(struct brcms_c_info *wlc, u8 *ssid,
size_t ssid_len);
The ucode is able to answer probe response by itself. This writes such a template into the specific memory. Currently the probe requests are also send to mac80211 so there are more answers send to a requesting client. We have to make the ucode stop sending probe requests to the driver. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> --- .../net/wireless/brcm80211/brcmsmac/mac80211_if.c | 11 ++ drivers/net/wireless/brcm80211/brcmsmac/main.c | 112 +++++--------------- drivers/net/wireless/brcm80211/brcmsmac/main.h | 1 + drivers/net/wireless/brcm80211/brcmsmac/pub.h | 2 + 4 files changed, 42 insertions(+), 84 deletions(-)