@@ -357,10 +357,11 @@ brcms_ops_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
{
struct brcms_info *wl = hw->priv;
- /* Just STA for now */
- if (vif->type != NL80211_IFTYPE_STATION) {
+ /* Just STA and AP for now */
+ if (vif->type != NL80211_IFTYPE_STATION &&
+ vif->type != NL80211_IFTYPE_AP) {
brcms_err(wl->wlc->hw->d11core,
- "%s: Attempt to add type %d, only STA for now\n",
+ "%s: Attempt to add type %d, only STA and AP for now\n",
__func__, vif->type);
return -EOPNOTSUPP;
}
@@ -370,6 +371,9 @@ brcms_ops_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
brcms_c_mute(wl->wlc, false);
if (vif->type == NL80211_IFTYPE_STATION)
brcms_c_start_station(wl->wlc, vif->addr);
+ else if (vif->type == NL80211_IFTYPE_AP)
+ brcms_c_start_ap(wl->wlc, vif->addr, vif->bss_conf.bssid,
+ vif->bss_conf.ssid, vif->bss_conf.ssid_len);
spin_unlock_bh(&wl->lock);
return 0;
@@ -1051,7 +1055,8 @@ static int ieee_hw_init(struct ieee80211_hw *hw)
/* channel change time is dependent on chip and band */
hw->channel_change_time = 7 * 1000;
- hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+ hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_AP);
/*
* deactivate sending probe responses by ucude, because this will
@@ -2174,6 +2174,18 @@ void brcms_c_start_station(struct brcms_c_info *wlc, u8 *addr)
wlc->bsscfg->type = BRCMS_TYPE_STATION;
}
+void brcms_c_start_ap(struct brcms_c_info *wlc, u8 *addr, const u8 *bssid,
+ u8 *ssid, size_t ssid_len)
+{
+ brcms_c_set_ssid(wlc, ssid, ssid_len);
+
+ memcpy(wlc->pub->cur_etheraddr, addr, sizeof(wlc->pub->cur_etheraddr));
+ memcpy(wlc->bsscfg->BSSID, bssid, sizeof(wlc->bsscfg->BSSID));
+ wlc->bsscfg->type = BRCMS_TYPE_AP;
+
+ brcms_b_mctrl(wlc->hw, MCTL_AP | MCTL_INFRA, MCTL_AP | MCTL_INFRA);
+}
+
/* Initialize GPIOs that are controlled by D11 core */
static void brcms_c_gpio_init(struct brcms_c_info *wlc)
{
@@ -3062,6 +3074,9 @@ static bool brcms_c_ps_allowed(struct brcms_c_info *wlc)
if (wlc->filter_flags & FIF_PROMISC_IN_BSS)
return false;
+ if (wlc->bsscfg->type == BRCMS_TYPE_AP)
+ return false;
+
return true;
}
@@ -332,6 +332,8 @@ extern bool brcms_c_check_radio_disabled(struct brcms_c_info *wlc);
extern void brcms_c_mute(struct brcms_c_info *wlc, bool on);
extern bool brcms_c_tx_flush_completed(struct brcms_c_info *wlc);
extern void brcms_c_start_station(struct brcms_c_info *wlc, u8 *addr);
+extern void brcms_c_start_ap(struct brcms_c_info *wlc, u8 *addr,
+ const u8 *bssid, u8 *ssid, size_t ssid_len);
extern void brcms_c_update_beacon(struct brcms_c_info *wlc);
extern void brcms_c_set_new_beacon(struct brcms_c_info *wlc,
struct sk_buff *beacon, u16 tim_offset,
This activates the AP mode support. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> --- drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c | 13 +++++++++---- drivers/net/wireless/brcm80211/brcmsmac/main.c | 15 +++++++++++++++ drivers/net/wireless/brcm80211/brcmsmac/pub.h | 2 ++ 3 files changed, 26 insertions(+), 4 deletions(-)