@@ -2789,10 +2789,6 @@ static void b43_nphy_iq_cal_gain_params(struct b43_wldev *dev, u16 core,
* Tx and Rx
**************************************************/
-void b43_nphy_set_rxantenna(struct b43_wldev *dev, int antenna)
-{//TODO
-}
-
static void b43_nphy_op_adjust_txpower(struct b43_wldev *dev)
{//TODO
}
@@ -4892,7 +4888,7 @@ static void b43_nphy_superswitch_init(struct b43_wldev *dev, bool init)
}
/* http://bcm-v4.sipsolutions.net/802.11/PHY/Init/N */
-int b43_phy_initn(struct b43_wldev *dev)
+static int b43_phy_initn(struct b43_wldev *dev)
{
struct ssb_sprom *sprom = dev->dev->bus_sprom;
struct b43_phy *phy = &dev->phy;
@@ -2980,7 +2980,7 @@ static const struct b2056_inittab_entry b2056_inittab_rev8_rx[] = {
.rx = prefix##_rx, \
.rx_length = ARRAY_SIZE(prefix##_rx)
-struct b2056_inittabs_pts b2056_inittabs[] = {
+static struct b2056_inittabs_pts b2056_inittabs[] = {
[3] = { INITTABSPTS(b2056_inittab_rev3) },
[4] = { INITTABSPTS(b2056_inittab_rev4) },
[5] = { INITTABSPTS(b2056_inittab_rev5) },
@@ -25,12 +25,12 @@ void b43_sdio_exit(void);
#else /* CONFIG_B43_SDIO */
-int b43_sdio_request_irq(struct b43_wldev *dev,
+static inline int b43_sdio_request_irq(struct b43_wldev *dev,
void (*handler)(struct b43_wldev *dev))
{
return -ENODEV;
}
-void b43_sdio_free_irq(struct b43_wldev *dev)
+static inline void b43_sdio_free_irq(struct b43_wldev *dev)
{
}
static inline int b43_sdio_init(void)
@@ -2800,7 +2800,7 @@ static const struct nphy_rf_control_override_rev7
{ 0x0010, 0x344, 0x345, 0x0010, 4 },
};
-struct nphy_gain_ctl_workaround_entry nphy_gain_ctl_wa_phy6_radio11_ghz2 = {
+static struct nphy_gain_ctl_workaround_entry nphy_gain_ctl_wa_phy6_radio11_ghz2 = {
{ 10, 14, 19, 27 },
{ -5, 6, 10, 15 },
{ 0xA, 0xA, 0xA, 0xA, 0xA, 0xA, 0xA, 0xA, 0xA, 0xA },
@@ -2811,7 +2811,7 @@ struct nphy_gain_ctl_workaround_entry nphy_gain_ctl_wa_phy6_radio11_ghz2 = {
0x18, 0x18, 0x18,
0x01D0, 0x5,
};
-struct nphy_gain_ctl_workaround_entry nphy_gain_ctl_workaround[2][4] = {
+static struct nphy_gain_ctl_workaround_entry nphy_gain_ctl_workaround[2][4] = {
{ /* 2GHz */
{ /* PHY rev 3 */
{ 7, 11, 16, 23 },
@@ -313,7 +313,7 @@ static const u32 b43_lcntab_0x18[] = {
* TX gain.
**************************************************/
-const struct b43_lcntab_tx_gain_tbl_entry
+static const struct b43_lcntab_tx_gain_tbl_entry
b43_lcntab_tx_gain_tbl_2ghz_ext_pa_rev0[B43_LCNTAB_TX_GAIN_SIZE] = {
{ 0x03, 0x00, 0x1f, 0x0, 0x48 },
{ 0x03, 0x00, 0x1f, 0x0, 0x46 },
@@ -449,7 +449,7 @@ const struct b43_lcntab_tx_gain_tbl_entry
* SW control.
**************************************************/
-const u16 b43_lcntab_sw_ctl_4313_epa_rev0[] = {
+static const u16 b43_lcntab_sw_ctl_4313_epa_rev0[] = {
0x0002, 0x0008, 0x0004, 0x0001, 0x0002, 0x0008,
0x0004, 0x0001, 0x0002, 0x0008, 0x0004, 0x0001,
0x0002, 0x0008, 0x0004, 0x0001, 0x0002, 0x0008,
@@ -631,7 +631,7 @@ static void b43_phy_lcn_upload_static_tables(struct b43_wldev *dev)
lcntab_upload(dev, B43_LCNTAB32(0x18, 0), b43_lcntab_0x18);
}
-void b43_phy_lcn_load_tx_gain_tab(struct b43_wldev *dev,
+static void b43_phy_lcn_load_tx_gain_tab(struct b43_wldev *dev,
const struct b43_lcntab_tx_gain_tbl_entry *gain_table)
{
u32 i;
This fixes some sparse warnings. b43_nphy_set_rxantenna() was not used anywhere. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> --- drivers/net/wireless/b43/phy_n.c | 6 +----- drivers/net/wireless/b43/radio_2056.c | 2 +- drivers/net/wireless/b43/sdio.h | 4 ++-- drivers/net/wireless/b43/tables_nphy.c | 4 ++-- drivers/net/wireless/b43/tables_phy_lcn.c | 6 +++--- 5 files changed, 9 insertions(+), 13 deletions(-)