@@ -6961,6 +6961,72 @@ static const struct rf_channel rf_vals_5592_xtal40[] = {
{196, 83, 0, 12, 1},
};
+static const struct rf_channel rf_vals_3053[] = {
+ /* Channel, N, R, K */
+ {1, 241, 2, 2},
+ {2, 241, 2, 7},
+ {3, 242, 2, 2},
+ {4, 242, 2, 7},
+ {5, 243, 2, 2},
+ {6, 243, 2, 7},
+ {7, 244, 2, 2},
+ {8, 244, 2, 7},
+ {9, 245, 2, 2},
+ {10, 245, 2, 7},
+ {11, 246, 2, 2},
+ {12, 246, 2, 7},
+ {13, 247, 2, 2},
+ {14, 248, 2, 4},
+
+ {36, 0x56, 0, 4},
+ {38, 0x56, 0, 6},
+ {40, 0x56, 0, 8},
+ {44, 0x57, 0, 0},
+ {46, 0x57, 0, 2},
+ {48, 0x57, 0, 4},
+ {52, 0x57, 0, 8},
+ {54, 0x57, 0, 10},
+ {56, 0x58, 0, 0},
+ {60, 0x58, 0, 4},
+ {62, 0x58, 0, 6},
+ {64, 0x58, 0, 8},
+
+ {100, 0x5B, 0, 8},
+ {102, 0x5B, 0, 10},
+ {104, 0x5C, 0, 0},
+ {108, 0x5C, 0, 4},
+ {110, 0x5C, 0, 6},
+ {112, 0x5C, 0, 8},
+
+ /* NOTE: Channel 114 has been removed intentionally.
+ * The EEPROM contains no TX power values for that,
+ * and it is disabled in the vendor driver as well.
+ */
+
+ {116, 0x5D, 0, 0},
+ {118, 0x5D, 0, 2},
+ {120, 0x5D, 0, 4},
+ {124, 0x5D, 0, 8},
+ {126, 0x5D, 0, 10},
+ {128, 0x5E, 0, 0},
+ {132, 0x5E, 0, 4},
+ {134, 0x5E, 0, 6},
+ {136, 0x5E, 0, 8},
+ {140, 0x5F, 0, 0},
+
+ {149, 0x5F, 0, 9},
+ {151, 0x5F, 0, 11},
+ {153, 0x60, 0, 1},
+ {157, 0x60, 0, 5},
+ {159, 0x60, 0, 7},
+ {161, 0x60, 0, 9},
+ {165, 0x61, 0, 1},
+ {167, 0x61, 0, 3},
+ {169, 0x61, 0, 5},
+ {171, 0x61, 0, 7},
+ {173, 0x61, 0, 9},
+};
+
static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
@@ -7052,6 +7118,10 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
spec->supported_bands |= SUPPORT_BAND_5GHZ;
spec->num_channels = ARRAY_SIZE(rf_vals_3x);
spec->channels = rf_vals_3x;
+ } else if (rt2x00_rf(rt2x00dev, RF3053)) {
+ spec->supported_bands |= SUPPORT_BAND_5GHZ;
+ spec->num_channels = ARRAY_SIZE(rf_vals_3053);
+ spec->channels = rf_vals_3053;
} else if (rt2x00_rf(rt2x00dev, RF5592)) {
spec->supported_bands |= SUPPORT_BAND_5GHZ;