diff mbox

[5/5] rt2x00: rt2800lib: adjust frequency offset for RF3053

Message ID 1376685498-5167-6-git-send-email-juhosg@openwrt.org (mailing list archive)
State Superseded, archived
Headers show

Commit Message

Gabor Juhos Aug. 16, 2013, 8:38 p.m. UTC 
Along with other chipsets, the Ralink driver uses the
frequency adjustment code for RF3053 as well. Remove
the bogus place-holder comment from the RF3053 specific
channel configuration function and call the frequency
adjustment function instead

Based on the DPO_RT5572_LinuxSTA_2.6.0.1_20120629
driver.

Reference:
  RT3593_ChipSwitchChannel function in chips/rt3593.c

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
 drivers/net/wireless/rt2x00/rt2800lib.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox

Patch

diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 9b4d836..fb71ed6 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -2344,7 +2344,7 @@  static void rt2800_config_channel_rf3053(struct rt2x00_dev *rt2x00dev,
 	}
 	rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
 
-	/* TODO: frequency calibration? */
+	rt2800_adjust_freq_offset(rt2x00dev);
 
 	if (conf_is_ht40(conf)) {
 		txrx_agc_fc = rt2x00_get_field8(drv_data->calibration_bw40,