Message ID | 1377197602-5567-2-git-send-email-juhosg@openwrt.org (mailing list archive) |
---|---|
State | Not Applicable, archived |
Headers | show |
On Thu, Aug 22, 2013 at 8:53 PM, Gabor Juhos <juhosg@openwrt.org> wrote: > The values written into the BCN_OFFSET[01] registers are > hardcoded in the rt2800_init_register function. > > Add a macro and a helper function to derive these values > directly from the base address of a given beacon, and use > the new function instead of the hardcoded numbers. > > The patch contains no functional changes. The programmed > register values are the same before and after the patch. > > Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Fine with me as well. Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> > --- > Changes since v2: > - separated from the 'rt2x00: fix beaconing on RT3593' patch-set > > Changes since v1: --- > --- > drivers/net/wireless/rt2x00/rt2800.h | 2 ++ > drivers/net/wireless/rt2x00/rt2800lib.c | 30 ++++++++++++++++++++++-------- > 2 files changed, 24 insertions(+), 8 deletions(-) > > diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h > index e25e5bf..fa33b5e 100644 > --- a/drivers/net/wireless/rt2x00/rt2800.h > +++ b/drivers/net/wireless/rt2x00/rt2800.h > @@ -2024,6 +2024,8 @@ struct mac_iveiv_entry { > (((__index) < 6) ? (HW_BEACON_BASE4 + ((__index - 4) * 0x0200)) : \ > (HW_BEACON_BASE6 - ((__index - 6) * 0x0200)))) > > +#define BEACON_BASE_TO_OFFSET(_base) (((_base) - 0x4000) / 64) > + > /* > * BBP registers. > * The wordsize of the BBP is 8 bits. > diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c > index 38606e2..20243dc 100644 > --- a/drivers/net/wireless/rt2x00/rt2800lib.c > +++ b/drivers/net/wireless/rt2x00/rt2800lib.c > @@ -946,6 +946,12 @@ static unsigned int rt2800_hw_beacon_base(struct rt2x00_dev *rt2x00dev, > return HW_BEACON_BASE(index); > } > > +static inline u8 rt2800_get_beacon_offset(struct rt2x00_dev *rt2x00dev, > + unsigned int index) > +{ > + return BEACON_BASE_TO_OFFSET(rt2800_hw_beacon_base(rt2x00dev, index)); > +} > + > void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc) > { > struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; > @@ -4474,17 +4480,25 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) > return ret; > > rt2800_register_read(rt2x00dev, BCN_OFFSET0, ®); > - rt2x00_set_field32(®, BCN_OFFSET0_BCN0, 0xe0); /* 0x3800 */ > - rt2x00_set_field32(®, BCN_OFFSET0_BCN1, 0xe8); /* 0x3a00 */ > - rt2x00_set_field32(®, BCN_OFFSET0_BCN2, 0xf0); /* 0x3c00 */ > - rt2x00_set_field32(®, BCN_OFFSET0_BCN3, 0xf8); /* 0x3e00 */ > + rt2x00_set_field32(®, BCN_OFFSET0_BCN0, > + rt2800_get_beacon_offset(rt2x00dev, 0)); > + rt2x00_set_field32(®, BCN_OFFSET0_BCN1, > + rt2800_get_beacon_offset(rt2x00dev, 1)); > + rt2x00_set_field32(®, BCN_OFFSET0_BCN2, > + rt2800_get_beacon_offset(rt2x00dev, 2)); > + rt2x00_set_field32(®, BCN_OFFSET0_BCN3, > + rt2800_get_beacon_offset(rt2x00dev, 3)); > rt2800_register_write(rt2x00dev, BCN_OFFSET0, reg); > > rt2800_register_read(rt2x00dev, BCN_OFFSET1, ®); > - rt2x00_set_field32(®, BCN_OFFSET1_BCN4, 0xc8); /* 0x3200 */ > - rt2x00_set_field32(®, BCN_OFFSET1_BCN5, 0xd0); /* 0x3400 */ > - rt2x00_set_field32(®, BCN_OFFSET1_BCN6, 0x77); /* 0x1dc0 */ > - rt2x00_set_field32(®, BCN_OFFSET1_BCN7, 0x6f); /* 0x1bc0 */ > + rt2x00_set_field32(®, BCN_OFFSET1_BCN4, > + rt2800_get_beacon_offset(rt2x00dev, 4)); > + rt2x00_set_field32(®, BCN_OFFSET1_BCN5, > + rt2800_get_beacon_offset(rt2x00dev, 5)); > + rt2x00_set_field32(®, BCN_OFFSET1_BCN6, > + rt2800_get_beacon_offset(rt2x00dev, 6)); > + rt2x00_set_field32(®, BCN_OFFSET1_BCN7, > + rt2800_get_beacon_offset(rt2x00dev, 7)); > rt2800_register_write(rt2x00dev, BCN_OFFSET1, reg); > > rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f); > -- > 1.7.10 > -- > To unsubscribe from this list: send the line "unsubscribe linux-wireless" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h index e25e5bf..fa33b5e 100644 --- a/drivers/net/wireless/rt2x00/rt2800.h +++ b/drivers/net/wireless/rt2x00/rt2800.h @@ -2024,6 +2024,8 @@ struct mac_iveiv_entry { (((__index) < 6) ? (HW_BEACON_BASE4 + ((__index - 4) * 0x0200)) : \ (HW_BEACON_BASE6 - ((__index - 6) * 0x0200)))) +#define BEACON_BASE_TO_OFFSET(_base) (((_base) - 0x4000) / 64) + /* * BBP registers. * The wordsize of the BBP is 8 bits. diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 38606e2..20243dc 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -946,6 +946,12 @@ static unsigned int rt2800_hw_beacon_base(struct rt2x00_dev *rt2x00dev, return HW_BEACON_BASE(index); } +static inline u8 rt2800_get_beacon_offset(struct rt2x00_dev *rt2x00dev, + unsigned int index) +{ + return BEACON_BASE_TO_OFFSET(rt2800_hw_beacon_base(rt2x00dev, index)); +} + void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc) { struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; @@ -4474,17 +4480,25 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) return ret; rt2800_register_read(rt2x00dev, BCN_OFFSET0, ®); - rt2x00_set_field32(®, BCN_OFFSET0_BCN0, 0xe0); /* 0x3800 */ - rt2x00_set_field32(®, BCN_OFFSET0_BCN1, 0xe8); /* 0x3a00 */ - rt2x00_set_field32(®, BCN_OFFSET0_BCN2, 0xf0); /* 0x3c00 */ - rt2x00_set_field32(®, BCN_OFFSET0_BCN3, 0xf8); /* 0x3e00 */ + rt2x00_set_field32(®, BCN_OFFSET0_BCN0, + rt2800_get_beacon_offset(rt2x00dev, 0)); + rt2x00_set_field32(®, BCN_OFFSET0_BCN1, + rt2800_get_beacon_offset(rt2x00dev, 1)); + rt2x00_set_field32(®, BCN_OFFSET0_BCN2, + rt2800_get_beacon_offset(rt2x00dev, 2)); + rt2x00_set_field32(®, BCN_OFFSET0_BCN3, + rt2800_get_beacon_offset(rt2x00dev, 3)); rt2800_register_write(rt2x00dev, BCN_OFFSET0, reg); rt2800_register_read(rt2x00dev, BCN_OFFSET1, ®); - rt2x00_set_field32(®, BCN_OFFSET1_BCN4, 0xc8); /* 0x3200 */ - rt2x00_set_field32(®, BCN_OFFSET1_BCN5, 0xd0); /* 0x3400 */ - rt2x00_set_field32(®, BCN_OFFSET1_BCN6, 0x77); /* 0x1dc0 */ - rt2x00_set_field32(®, BCN_OFFSET1_BCN7, 0x6f); /* 0x1bc0 */ + rt2x00_set_field32(®, BCN_OFFSET1_BCN4, + rt2800_get_beacon_offset(rt2x00dev, 4)); + rt2x00_set_field32(®, BCN_OFFSET1_BCN5, + rt2800_get_beacon_offset(rt2x00dev, 5)); + rt2x00_set_field32(®, BCN_OFFSET1_BCN6, + rt2800_get_beacon_offset(rt2x00dev, 6)); + rt2x00_set_field32(®, BCN_OFFSET1_BCN7, + rt2800_get_beacon_offset(rt2x00dev, 7)); rt2800_register_write(rt2x00dev, BCN_OFFSET1, reg); rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f);
The values written into the BCN_OFFSET[01] registers are hardcoded in the rt2800_init_register function. Add a macro and a helper function to derive these values directly from the base address of a given beacon, and use the new function instead of the hardcoded numbers. The patch contains no functional changes. The programmed register values are the same before and after the patch. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- Changes since v2: - separated from the 'rt2x00: fix beaconing on RT3593' patch-set Changes since v1: --- --- drivers/net/wireless/rt2x00/rt2800.h | 2 ++ drivers/net/wireless/rt2x00/rt2800lib.c | 30 ++++++++++++++++++++++-------- 2 files changed, 24 insertions(+), 8 deletions(-)