| Message ID | 1380823243-11149-2-git-send-email-juhosg@openwrt.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Thu, Oct 03, 2013 at 08:00:41PM +0200, Gabor Juhos wrote: > The Ralink DPO_RT5572_LinuxSTA_2.6.1.3_20121022 > reference driver uses different RSSI threshold > and VGC adjustment values for the RT3572 and > RT3593 chipsets. > > Update the rt2800_link_tuner function to use the > same values. Also change the comment in the function > to make it more generic. > > References: > > RT35xx_ChipAGCAdjust function in chips/rt35xx.c > RSSI_FOR_MID_LOW_SENSIBILITY constant in include/chip/rtmp_phy.h > RT3593_R66_MID_LOW_SENS_GET macro in include/chip/rt3593.h > RT3593_R66_NON_MID_LOW_SEMS_GET macro in include/chips/rt3593.h > > Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 2690081..a619f2c 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -4462,19 +4462,34 @@ void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual, if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C)) return; - /* - * When RSSI is better then -80 increase VGC level with 0x10, except - * for rt5592 chip. + + /* When RSSI is better than a certain threshold, increase VGC + * with a chip specific value in order to improve the balance + * between sensibility and noise isolation. */ vgc = rt2800_get_default_vgc(rt2x00dev); - if (rt2x00_rt(rt2x00dev, RT5592)) { + switch (rt2x00dev->chip.rt) { + case RT3572: + case RT3593: + if (qual->rssi > -65) { + if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) + vgc += 0x20; + else + vgc += 0x10; + } + break; + + case RT5592: if (qual->rssi > -65) vgc += 0x20; - } else { + break; + + default: if (qual->rssi > -80) vgc += 0x10; + break; } rt2800_set_vgc(rt2x00dev, qual, vgc);
The Ralink DPO_RT5572_LinuxSTA_2.6.1.3_20121022 reference driver uses different RSSI threshold and VGC adjustment values for the RT3572 and RT3593 chipsets. Update the rt2800_link_tuner function to use the same values. Also change the comment in the function to make it more generic. References: RT35xx_ChipAGCAdjust function in chips/rt35xx.c RSSI_FOR_MID_LOW_SENSIBILITY constant in include/chip/rtmp_phy.h RT3593_R66_MID_LOW_SENS_GET macro in include/chip/rt3593.h RT3593_R66_NON_MID_LOW_SEMS_GET macro in include/chips/rt3593.h Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- drivers/net/wireless/rt2x00/rt2800lib.c | 25 ++++++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-)