diff mbox

[v2] ath10k: do not warn about unsupported vdev param

Message ID 1381821980-7966-1-git-send-email-bartosz.markowski@tieto.com (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

Bartosz Markowski Oct. 15, 2013, 7:26 a.m. UTC
10.X firmware does not support WMI_VDEV_PARAM_TX_ENCAP_TYPE.
It's a known limitation and we should not warn about this.

Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
---
 drivers/net/wireless/ath/ath10k/mac.c |    3 ++-
 drivers/net/wireless/ath/ath10k/wmi.c |    2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)

Comments

Kalle Valo Oct. 16, 2013, 8:50 a.m. UTC | #1
Bartosz Markowski <bartosz.markowski@tieto.com> writes:

> 10.X firmware does not support WMI_VDEV_PARAM_TX_ENCAP_TYPE.
> It's a known limitation and we should not warn about this.
>
> Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>

Thanks, applied.
diff mbox

Patch

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 049eca2..97d7111 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2085,7 +2085,8 @@  static int ath10k_add_interface(struct ieee80211_hw *hw,
 	vdev_param = ar->wmi.vdev_param->tx_encap_type;
 	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
 					ATH10K_HW_TXRX_NATIVE_WIFI);
-	if (ret)
+	/* 10.X firmware does not support this VDEV parameter. Do not warn */
+	if (ret && ret != -EOPNOTSUPP)
 		ath10k_warn("Failed to set TX encap: %d\n", ret);
 
 	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index f9766fa..fa07388 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -2763,7 +2763,7 @@  int ath10k_wmi_vdev_set_param(struct ath10k *ar, u32 vdev_id,
 		ath10k_dbg(ATH10K_DBG_WMI,
 			   "vdev param %d not supported by firmware\n",
 			    param_id);
-		return -EINVAL;
+		return -EOPNOTSUPP;
 	}
 
 	skb = ath10k_wmi_alloc_skb(sizeof(*cmd));