@@ -34,6 +34,7 @@
#include "rt2x00.h"
#include "rt2x00mmio.h"
+#include "rt2800.h"
#include "rt2800lib.h"
#include "rt2800mmio.h"
@@ -156,6 +157,401 @@ void rt2800mmio_fill_rxdone(struct queue_entry *entry,
}
EXPORT_SYMBOL_GPL(rt2800mmio_fill_rxdone);
+/*
+ * Interrupt functions.
+ */
+static void rt2800mmio_wakeup(struct rt2x00_dev *rt2x00dev)
+{
+ struct ieee80211_conf conf = { .flags = 0 };
+ struct rt2x00lib_conf libconf = { .conf = &conf };
+
+ rt2800_config(rt2x00dev, &libconf, IEEE80211_CONF_CHANGE_PS);
+}
+
+static bool rt2800mmio_txdone_entry_check(struct queue_entry *entry, u32 status)
+{
+ __le32 *txwi;
+ u32 word;
+ int wcid, tx_wcid;
+
+ wcid = rt2x00_get_field32(status, TX_STA_FIFO_WCID);
+
+ txwi = rt2800_drv_get_txwi(entry);
+ rt2x00_desc_read(txwi, 1, &word);
+ tx_wcid = rt2x00_get_field32(word, TXWI_W1_WIRELESS_CLI_ID);
+
+ return (tx_wcid == wcid);
+}
+
+static bool rt2800mmio_txdone_find_entry(struct queue_entry *entry, void *data)
+{
+ u32 status = *(u32 *)data;
+
+ /*
+ * rt2800pci hardware might reorder frames when exchanging traffic
+ * with multiple BA enabled STAs.
+ *
+ * For example, a tx queue
+ * [ STA1 | STA2 | STA1 | STA2 ]
+ * can result in tx status reports
+ * [ STA1 | STA1 | STA2 | STA2 ]
+ * when the hw decides to aggregate the frames for STA1 into one AMPDU.
+ *
+ * To mitigate this effect, associate the tx status to the first frame
+ * in the tx queue with a matching wcid.
+ */
+ if (rt2800mmio_txdone_entry_check(entry, status) &&
+ !test_bit(ENTRY_DATA_STATUS_SET, &entry->flags)) {
+ /*
+ * Got a matching frame, associate the tx status with
+ * the frame
+ */
+ entry->status = status;
+ set_bit(ENTRY_DATA_STATUS_SET, &entry->flags);
+ return true;
+ }
+
+ /* Check the next frame */
+ return false;
+}
+
+static bool rt2800mmio_txdone_match_first(struct queue_entry *entry, void *data)
+{
+ u32 status = *(u32 *)data;
+
+ /*
+ * Find the first frame without tx status and assign this status to it
+ * regardless if it matches or not.
+ */
+ if (!test_bit(ENTRY_DATA_STATUS_SET, &entry->flags)) {
+ /*
+ * Got a matching frame, associate the tx status with
+ * the frame
+ */
+ entry->status = status;
+ set_bit(ENTRY_DATA_STATUS_SET, &entry->flags);
+ return true;
+ }
+
+ /* Check the next frame */
+ return false;
+}
+static bool rt2800mmio_txdone_release_entries(struct queue_entry *entry,
+ void *data)
+{
+ if (test_bit(ENTRY_DATA_STATUS_SET, &entry->flags)) {
+ rt2800_txdone_entry(entry, entry->status,
+ rt2800mmio_get_txwi(entry));
+ return false;
+ }
+
+ /* No more frames to release */
+ return true;
+}
+
+static bool rt2800mmio_txdone(struct rt2x00_dev *rt2x00dev)
+{
+ struct data_queue *queue;
+ u32 status;
+ u8 qid;
+ int max_tx_done = 16;
+
+ while (kfifo_get(&rt2x00dev->txstatus_fifo, &status)) {
+ qid = rt2x00_get_field32(status, TX_STA_FIFO_PID_QUEUE);
+ if (unlikely(qid >= QID_RX)) {
+ /*
+ * Unknown queue, this shouldn't happen. Just drop
+ * this tx status.
+ */
+ rt2x00_warn(rt2x00dev, "Got TX status report with unexpected pid %u, dropping\n",
+ qid);
+ break;
+ }
+
+ queue = rt2x00queue_get_tx_queue(rt2x00dev, qid);
+ if (unlikely(queue == NULL)) {
+ /*
+ * The queue is NULL, this shouldn't happen. Stop
+ * processing here and drop the tx status
+ */
+ rt2x00_warn(rt2x00dev, "Got TX status for an unavailable queue %u, dropping\n",
+ qid);
+ break;
+ }
+
+ if (unlikely(rt2x00queue_empty(queue))) {
+ /*
+ * The queue is empty. Stop processing here
+ * and drop the tx status.
+ */
+ rt2x00_warn(rt2x00dev, "Got TX status for an empty queue %u, dropping\n",
+ qid);
+ break;
+ }
+
+ /*
+ * Let's associate this tx status with the first
+ * matching frame.
+ */
+ if (!rt2x00queue_for_each_entry(queue, Q_INDEX_DONE,
+ Q_INDEX, &status,
+ rt2800mmio_txdone_find_entry)) {
+ /*
+ * We cannot match the tx status to any frame, so just
+ * use the first one.
+ */
+ if (!rt2x00queue_for_each_entry(queue, Q_INDEX_DONE,
+ Q_INDEX, &status,
+ rt2800mmio_txdone_match_first)) {
+ rt2x00_warn(rt2x00dev, "No frame found for TX status on queue %u, dropping\n",
+ qid);
+ break;
+ }
+ }
+
+ /*
+ * Release all frames with a valid tx status.
+ */
+ rt2x00queue_for_each_entry(queue, Q_INDEX_DONE,
+ Q_INDEX, NULL,
+ rt2800mmio_txdone_release_entries);
+
+ if (--max_tx_done == 0)
+ break;
+ }
+
+ return !max_tx_done;
+}
+
+static inline void rt2800mmio_enable_interrupt(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00_field32 irq_field)
+{
+ u32 reg;
+
+ /*
+ * Enable a single interrupt. The interrupt mask register
+ * access needs locking.
+ */
+ spin_lock_irq(&rt2x00dev->irqmask_lock);
+ rt2x00mmio_register_read(rt2x00dev, INT_MASK_CSR, ®);
+ rt2x00_set_field32(®, irq_field, 1);
+ rt2x00mmio_register_write(rt2x00dev, INT_MASK_CSR, reg);
+ spin_unlock_irq(&rt2x00dev->irqmask_lock);
+}
+
+void rt2800mmio_txstatus_tasklet(unsigned long data)
+{
+ struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
+ if (rt2800mmio_txdone(rt2x00dev))
+ tasklet_schedule(&rt2x00dev->txstatus_tasklet);
+
+ /*
+ * No need to enable the tx status interrupt here as we always
+ * leave it enabled to minimize the possibility of a tx status
+ * register overflow. See comment in interrupt handler.
+ */
+}
+EXPORT_SYMBOL_GPL(rt2800mmio_txstatus_tasklet);
+
+void rt2800mmio_pretbtt_tasklet(unsigned long data)
+{
+ struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
+ rt2x00lib_pretbtt(rt2x00dev);
+ if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+ rt2800mmio_enable_interrupt(rt2x00dev, INT_MASK_CSR_PRE_TBTT);
+}
+EXPORT_SYMBOL_GPL(rt2800mmio_pretbtt_tasklet);
+
+void rt2800mmio_tbtt_tasklet(unsigned long data)
+{
+ struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
+ struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
+ u32 reg;
+
+ rt2x00lib_beacondone(rt2x00dev);
+
+ if (rt2x00dev->intf_ap_count) {
+ /*
+ * The rt2800pci hardware tbtt timer is off by 1us per tbtt
+ * causing beacon skew and as a result causing problems with
+ * some powersaving clients over time. Shorten the beacon
+ * interval every 64 beacons by 64us to mitigate this effect.
+ */
+ if (drv_data->tbtt_tick == (BCN_TBTT_OFFSET - 2)) {
+ rt2x00mmio_register_read(rt2x00dev, BCN_TIME_CFG, ®);
+ rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL,
+ (rt2x00dev->beacon_int * 16) - 1);
+ rt2x00mmio_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+ } else if (drv_data->tbtt_tick == (BCN_TBTT_OFFSET - 1)) {
+ rt2x00mmio_register_read(rt2x00dev, BCN_TIME_CFG, ®);
+ rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL,
+ (rt2x00dev->beacon_int * 16));
+ rt2x00mmio_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+ }
+ drv_data->tbtt_tick++;
+ drv_data->tbtt_tick %= BCN_TBTT_OFFSET;
+ }
+
+ if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+ rt2800mmio_enable_interrupt(rt2x00dev, INT_MASK_CSR_TBTT);
+}
+EXPORT_SYMBOL_GPL(rt2800mmio_tbtt_tasklet);
+
+void rt2800mmio_rxdone_tasklet(unsigned long data)
+{
+ struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
+ if (rt2x00mmio_rxdone(rt2x00dev))
+ tasklet_schedule(&rt2x00dev->rxdone_tasklet);
+ else if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+ rt2800mmio_enable_interrupt(rt2x00dev, INT_MASK_CSR_RX_DONE);
+}
+EXPORT_SYMBOL_GPL(rt2800mmio_rxdone_tasklet);
+
+void rt2800mmio_autowake_tasklet(unsigned long data)
+{
+ struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
+ rt2800mmio_wakeup(rt2x00dev);
+ if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+ rt2800mmio_enable_interrupt(rt2x00dev,
+ INT_MASK_CSR_AUTO_WAKEUP);
+}
+EXPORT_SYMBOL_GPL(rt2800mmio_autowake_tasklet);
+
+static void rt2800mmio_txstatus_interrupt(struct rt2x00_dev *rt2x00dev)
+{
+ u32 status;
+ int i;
+
+ /*
+ * The TX_FIFO_STATUS interrupt needs special care. We should
+ * read TX_STA_FIFO but we should do it immediately as otherwise
+ * the register can overflow and we would lose status reports.
+ *
+ * Hence, read the TX_STA_FIFO register and copy all tx status
+ * reports into a kernel FIFO which is handled in the txstatus
+ * tasklet. We use a tasklet to process the tx status reports
+ * because we can schedule the tasklet multiple times (when the
+ * interrupt fires again during tx status processing).
+ *
+ * Furthermore we don't disable the TX_FIFO_STATUS
+ * interrupt here but leave it enabled so that the TX_STA_FIFO
+ * can also be read while the tx status tasklet gets executed.
+ *
+ * Since we have only one producer and one consumer we don't
+ * need to lock the kfifo.
+ */
+ for (i = 0; i < rt2x00dev->tx->limit; i++) {
+ rt2x00mmio_register_read(rt2x00dev, TX_STA_FIFO, &status);
+
+ if (!rt2x00_get_field32(status, TX_STA_FIFO_VALID))
+ break;
+
+ if (!kfifo_put(&rt2x00dev->txstatus_fifo, &status)) {
+ rt2x00_warn(rt2x00dev, "TX status FIFO overrun, drop tx status report\n");
+ break;
+ }
+ }
+
+ /* Schedule the tasklet for processing the tx status. */
+ tasklet_schedule(&rt2x00dev->txstatus_tasklet);
+}
+
+irqreturn_t rt2800mmio_interrupt(int irq, void *dev_instance)
+{
+ struct rt2x00_dev *rt2x00dev = dev_instance;
+ u32 reg, mask;
+
+ /* Read status and ACK all interrupts */
+ rt2x00mmio_register_read(rt2x00dev, INT_SOURCE_CSR, ®);
+ rt2x00mmio_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
+
+ if (!reg)
+ return IRQ_NONE;
+
+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+ return IRQ_HANDLED;
+
+ /*
+ * Since INT_MASK_CSR and INT_SOURCE_CSR use the same bits
+ * for interrupts and interrupt masks we can just use the value of
+ * INT_SOURCE_CSR to create the interrupt mask.
+ */
+ mask = ~reg;
+
+ if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS)) {
+ rt2800mmio_txstatus_interrupt(rt2x00dev);
+ /*
+ * Never disable the TX_FIFO_STATUS interrupt.
+ */
+ rt2x00_set_field32(&mask, INT_MASK_CSR_TX_FIFO_STATUS, 1);
+ }
+
+ if (rt2x00_get_field32(reg, INT_SOURCE_CSR_PRE_TBTT))
+ tasklet_hi_schedule(&rt2x00dev->pretbtt_tasklet);
+
+ if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TBTT))
+ tasklet_hi_schedule(&rt2x00dev->tbtt_tasklet);
+
+ if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RX_DONE))
+ tasklet_schedule(&rt2x00dev->rxdone_tasklet);
+
+ if (rt2x00_get_field32(reg, INT_SOURCE_CSR_AUTO_WAKEUP))
+ tasklet_schedule(&rt2x00dev->autowake_tasklet);
+
+ /*
+ * Disable all interrupts for which a tasklet was scheduled right now,
+ * the tasklet will reenable the appropriate interrupts.
+ */
+ spin_lock(&rt2x00dev->irqmask_lock);
+ rt2x00mmio_register_read(rt2x00dev, INT_MASK_CSR, ®);
+ reg &= mask;
+ rt2x00mmio_register_write(rt2x00dev, INT_MASK_CSR, reg);
+ spin_unlock(&rt2x00dev->irqmask_lock);
+
+ return IRQ_HANDLED;
+}
+EXPORT_SYMBOL_GPL(rt2800mmio_interrupt);
+
+void rt2800mmio_toggle_irq(struct rt2x00_dev *rt2x00dev,
+ enum dev_state state)
+{
+ u32 reg;
+ unsigned long flags;
+
+ /*
+ * When interrupts are being enabled, the interrupt registers
+ * should clear the register to assure a clean state.
+ */
+ if (state == STATE_RADIO_IRQ_ON) {
+ rt2x00mmio_register_read(rt2x00dev, INT_SOURCE_CSR, ®);
+ rt2x00mmio_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
+ }
+
+ spin_lock_irqsave(&rt2x00dev->irqmask_lock, flags);
+ reg = 0;
+ if (state == STATE_RADIO_IRQ_ON) {
+ rt2x00_set_field32(®, INT_MASK_CSR_RX_DONE, 1);
+ rt2x00_set_field32(®, INT_MASK_CSR_TBTT, 1);
+ rt2x00_set_field32(®, INT_MASK_CSR_PRE_TBTT, 1);
+ rt2x00_set_field32(®, INT_MASK_CSR_TX_FIFO_STATUS, 1);
+ rt2x00_set_field32(®, INT_MASK_CSR_AUTO_WAKEUP, 1);
+ }
+ rt2x00mmio_register_write(rt2x00dev, INT_MASK_CSR, reg);
+ spin_unlock_irqrestore(&rt2x00dev->irqmask_lock, flags);
+
+ if (state == STATE_RADIO_IRQ_OFF) {
+ /*
+ * Wait for possibly running tasklets to finish.
+ */
+ tasklet_kill(&rt2x00dev->txstatus_tasklet);
+ tasklet_kill(&rt2x00dev->rxdone_tasklet);
+ tasklet_kill(&rt2x00dev->autowake_tasklet);
+ tasklet_kill(&rt2x00dev->tbtt_tasklet);
+ tasklet_kill(&rt2x00dev->pretbtt_tasklet);
+ }
+}
+EXPORT_SYMBOL_GPL(rt2800mmio_toggle_irq);
+
MODULE_AUTHOR(DRV_PROJECT);
MODULE_VERSION(DRV_VERSION);
MODULE_DESCRIPTION("rt2800 MMIO library");
@@ -128,5 +128,14 @@ void rt2800mmio_write_tx_desc(struct queue_entry *entry,
void rt2800mmio_fill_rxdone(struct queue_entry *entry,
struct rxdone_entry_desc *rxdesc);
+/* Interrupt functions */
+void rt2800mmio_txstatus_tasklet(unsigned long data);
+void rt2800mmio_pretbtt_tasklet(unsigned long data);
+void rt2800mmio_tbtt_tasklet(unsigned long data);
+void rt2800mmio_rxdone_tasklet(unsigned long data);
+void rt2800mmio_autowake_tasklet(unsigned long data);
+irqreturn_t rt2800mmio_interrupt(int irq, void *dev_instance);
+void rt2800mmio_toggle_irq(struct rt2x00_dev *rt2x00dev,
+ enum dev_state state);
#endif /* RT2800MMIO_H */
@@ -448,45 +448,6 @@ static int rt2800pci_init_queues(struct rt2x00_dev *rt2x00dev)
/*
* Device state switch handlers.
*/
-static void rt2800mmio_toggle_irq(struct rt2x00_dev *rt2x00dev,
- enum dev_state state)
-{
- u32 reg;
- unsigned long flags;
-
- /*
- * When interrupts are being enabled, the interrupt registers
- * should clear the register to assure a clean state.
- */
- if (state == STATE_RADIO_IRQ_ON) {
- rt2x00mmio_register_read(rt2x00dev, INT_SOURCE_CSR, ®);
- rt2x00mmio_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
- }
-
- spin_lock_irqsave(&rt2x00dev->irqmask_lock, flags);
- reg = 0;
- if (state == STATE_RADIO_IRQ_ON) {
- rt2x00_set_field32(®, INT_MASK_CSR_RX_DONE, 1);
- rt2x00_set_field32(®, INT_MASK_CSR_TBTT, 1);
- rt2x00_set_field32(®, INT_MASK_CSR_PRE_TBTT, 1);
- rt2x00_set_field32(®, INT_MASK_CSR_TX_FIFO_STATUS, 1);
- rt2x00_set_field32(®, INT_MASK_CSR_AUTO_WAKEUP, 1);
- }
- rt2x00mmio_register_write(rt2x00dev, INT_MASK_CSR, reg);
- spin_unlock_irqrestore(&rt2x00dev->irqmask_lock, flags);
-
- if (state == STATE_RADIO_IRQ_OFF) {
- /*
- * Wait for possibly running tasklets to finish.
- */
- tasklet_kill(&rt2x00dev->txstatus_tasklet);
- tasklet_kill(&rt2x00dev->rxdone_tasklet);
- tasklet_kill(&rt2x00dev->autowake_tasklet);
- tasklet_kill(&rt2x00dev->tbtt_tasklet);
- tasklet_kill(&rt2x00dev->pretbtt_tasklet);
- }
-}
-
static int rt2800pci_init_registers(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
@@ -628,355 +589,6 @@ static int rt2800pci_set_device_state(struct rt2x00_dev *rt2x00dev,
}
/*
- * Interrupt functions.
- */
-static void rt2800mmio_wakeup(struct rt2x00_dev *rt2x00dev)
-{
- struct ieee80211_conf conf = { .flags = 0 };
- struct rt2x00lib_conf libconf = { .conf = &conf };
-
- rt2800_config(rt2x00dev, &libconf, IEEE80211_CONF_CHANGE_PS);
-}
-
-static bool rt2800mmio_txdone_entry_check(struct queue_entry *entry, u32 status)
-{
- __le32 *txwi;
- u32 word;
- int wcid, tx_wcid;
-
- wcid = rt2x00_get_field32(status, TX_STA_FIFO_WCID);
-
- txwi = rt2800_drv_get_txwi(entry);
- rt2x00_desc_read(txwi, 1, &word);
- tx_wcid = rt2x00_get_field32(word, TXWI_W1_WIRELESS_CLI_ID);
-
- return (tx_wcid == wcid);
-}
-
-static bool rt2800mmio_txdone_find_entry(struct queue_entry *entry, void *data)
-{
- u32 status = *(u32 *)data;
-
- /*
- * rt2800pci hardware might reorder frames when exchanging traffic
- * with multiple BA enabled STAs.
- *
- * For example, a tx queue
- * [ STA1 | STA2 | STA1 | STA2 ]
- * can result in tx status reports
- * [ STA1 | STA1 | STA2 | STA2 ]
- * when the hw decides to aggregate the frames for STA1 into one AMPDU.
- *
- * To mitigate this effect, associate the tx status to the first frame
- * in the tx queue with a matching wcid.
- */
- if (rt2800mmio_txdone_entry_check(entry, status) &&
- !test_bit(ENTRY_DATA_STATUS_SET, &entry->flags)) {
- /*
- * Got a matching frame, associate the tx status with
- * the frame
- */
- entry->status = status;
- set_bit(ENTRY_DATA_STATUS_SET, &entry->flags);
- return true;
- }
-
- /* Check the next frame */
- return false;
-}
-
-static bool rt2800mmio_txdone_match_first(struct queue_entry *entry, void *data)
-{
- u32 status = *(u32 *)data;
-
- /*
- * Find the first frame without tx status and assign this status to it
- * regardless if it matches or not.
- */
- if (!test_bit(ENTRY_DATA_STATUS_SET, &entry->flags)) {
- /*
- * Got a matching frame, associate the tx status with
- * the frame
- */
- entry->status = status;
- set_bit(ENTRY_DATA_STATUS_SET, &entry->flags);
- return true;
- }
-
- /* Check the next frame */
- return false;
-}
-static bool rt2800mmio_txdone_release_entries(struct queue_entry *entry,
- void *data)
-{
- if (test_bit(ENTRY_DATA_STATUS_SET, &entry->flags)) {
- rt2800_txdone_entry(entry, entry->status,
- rt2800mmio_get_txwi(entry));
- return false;
- }
-
- /* No more frames to release */
- return true;
-}
-
-static bool rt2800mmio_txdone(struct rt2x00_dev *rt2x00dev)
-{
- struct data_queue *queue;
- u32 status;
- u8 qid;
- int max_tx_done = 16;
-
- while (kfifo_get(&rt2x00dev->txstatus_fifo, &status)) {
- qid = rt2x00_get_field32(status, TX_STA_FIFO_PID_QUEUE);
- if (unlikely(qid >= QID_RX)) {
- /*
- * Unknown queue, this shouldn't happen. Just drop
- * this tx status.
- */
- rt2x00_warn(rt2x00dev, "Got TX status report with unexpected pid %u, dropping\n",
- qid);
- break;
- }
-
- queue = rt2x00queue_get_tx_queue(rt2x00dev, qid);
- if (unlikely(queue == NULL)) {
- /*
- * The queue is NULL, this shouldn't happen. Stop
- * processing here and drop the tx status
- */
- rt2x00_warn(rt2x00dev, "Got TX status for an unavailable queue %u, dropping\n",
- qid);
- break;
- }
-
- if (unlikely(rt2x00queue_empty(queue))) {
- /*
- * The queue is empty. Stop processing here
- * and drop the tx status.
- */
- rt2x00_warn(rt2x00dev, "Got TX status for an empty queue %u, dropping\n",
- qid);
- break;
- }
-
- /*
- * Let's associate this tx status with the first
- * matching frame.
- */
- if (!rt2x00queue_for_each_entry(queue, Q_INDEX_DONE,
- Q_INDEX, &status,
- rt2800mmio_txdone_find_entry)) {
- /*
- * We cannot match the tx status to any frame, so just
- * use the first one.
- */
- if (!rt2x00queue_for_each_entry(queue, Q_INDEX_DONE,
- Q_INDEX, &status,
- rt2800mmio_txdone_match_first)) {
- rt2x00_warn(rt2x00dev, "No frame found for TX status on queue %u, dropping\n",
- qid);
- break;
- }
- }
-
- /*
- * Release all frames with a valid tx status.
- */
- rt2x00queue_for_each_entry(queue, Q_INDEX_DONE,
- Q_INDEX, NULL,
- rt2800mmio_txdone_release_entries);
-
- if (--max_tx_done == 0)
- break;
- }
-
- return !max_tx_done;
-}
-
-static inline void rt2800mmio_enable_interrupt(struct rt2x00_dev *rt2x00dev,
- struct rt2x00_field32 irq_field)
-{
- u32 reg;
-
- /*
- * Enable a single interrupt. The interrupt mask register
- * access needs locking.
- */
- spin_lock_irq(&rt2x00dev->irqmask_lock);
- rt2x00mmio_register_read(rt2x00dev, INT_MASK_CSR, ®);
- rt2x00_set_field32(®, irq_field, 1);
- rt2x00mmio_register_write(rt2x00dev, INT_MASK_CSR, reg);
- spin_unlock_irq(&rt2x00dev->irqmask_lock);
-}
-
-static void rt2800mmio_txstatus_tasklet(unsigned long data)
-{
- struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
- if (rt2800mmio_txdone(rt2x00dev))
- tasklet_schedule(&rt2x00dev->txstatus_tasklet);
-
- /*
- * No need to enable the tx status interrupt here as we always
- * leave it enabled to minimize the possibility of a tx status
- * register overflow. See comment in interrupt handler.
- */
-}
-
-static void rt2800mmio_pretbtt_tasklet(unsigned long data)
-{
- struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
- rt2x00lib_pretbtt(rt2x00dev);
- if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
- rt2800mmio_enable_interrupt(rt2x00dev, INT_MASK_CSR_PRE_TBTT);
-}
-
-static void rt2800mmio_tbtt_tasklet(unsigned long data)
-{
- struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
- struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
- u32 reg;
-
- rt2x00lib_beacondone(rt2x00dev);
-
- if (rt2x00dev->intf_ap_count) {
- /*
- * The rt2800pci hardware tbtt timer is off by 1us per tbtt
- * causing beacon skew and as a result causing problems with
- * some powersaving clients over time. Shorten the beacon
- * interval every 64 beacons by 64us to mitigate this effect.
- */
- if (drv_data->tbtt_tick == (BCN_TBTT_OFFSET - 2)) {
- rt2x00mmio_register_read(rt2x00dev, BCN_TIME_CFG, ®);
- rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL,
- (rt2x00dev->beacon_int * 16) - 1);
- rt2x00mmio_register_write(rt2x00dev, BCN_TIME_CFG, reg);
- } else if (drv_data->tbtt_tick == (BCN_TBTT_OFFSET - 1)) {
- rt2x00mmio_register_read(rt2x00dev, BCN_TIME_CFG, ®);
- rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL,
- (rt2x00dev->beacon_int * 16));
- rt2x00mmio_register_write(rt2x00dev, BCN_TIME_CFG, reg);
- }
- drv_data->tbtt_tick++;
- drv_data->tbtt_tick %= BCN_TBTT_OFFSET;
- }
-
- if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
- rt2800mmio_enable_interrupt(rt2x00dev, INT_MASK_CSR_TBTT);
-}
-
-static void rt2800mmio_rxdone_tasklet(unsigned long data)
-{
- struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
- if (rt2x00mmio_rxdone(rt2x00dev))
- tasklet_schedule(&rt2x00dev->rxdone_tasklet);
- else if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
- rt2800mmio_enable_interrupt(rt2x00dev, INT_MASK_CSR_RX_DONE);
-}
-
-static void rt2800mmio_autowake_tasklet(unsigned long data)
-{
- struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
- rt2800mmio_wakeup(rt2x00dev);
- if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
- rt2800mmio_enable_interrupt(rt2x00dev,
- INT_MASK_CSR_AUTO_WAKEUP);
-}
-
-static void rt2800mmio_txstatus_interrupt(struct rt2x00_dev *rt2x00dev)
-{
- u32 status;
- int i;
-
- /*
- * The TX_FIFO_STATUS interrupt needs special care. We should
- * read TX_STA_FIFO but we should do it immediately as otherwise
- * the register can overflow and we would lose status reports.
- *
- * Hence, read the TX_STA_FIFO register and copy all tx status
- * reports into a kernel FIFO which is handled in the txstatus
- * tasklet. We use a tasklet to process the tx status reports
- * because we can schedule the tasklet multiple times (when the
- * interrupt fires again during tx status processing).
- *
- * Furthermore we don't disable the TX_FIFO_STATUS
- * interrupt here but leave it enabled so that the TX_STA_FIFO
- * can also be read while the tx status tasklet gets executed.
- *
- * Since we have only one producer and one consumer we don't
- * need to lock the kfifo.
- */
- for (i = 0; i < rt2x00dev->tx->limit; i++) {
- rt2x00mmio_register_read(rt2x00dev, TX_STA_FIFO, &status);
-
- if (!rt2x00_get_field32(status, TX_STA_FIFO_VALID))
- break;
-
- if (!kfifo_put(&rt2x00dev->txstatus_fifo, &status)) {
- rt2x00_warn(rt2x00dev, "TX status FIFO overrun, drop tx status report\n");
- break;
- }
- }
-
- /* Schedule the tasklet for processing the tx status. */
- tasklet_schedule(&rt2x00dev->txstatus_tasklet);
-}
-
-static irqreturn_t rt2800mmio_interrupt(int irq, void *dev_instance)
-{
- struct rt2x00_dev *rt2x00dev = dev_instance;
- u32 reg, mask;
-
- /* Read status and ACK all interrupts */
- rt2x00mmio_register_read(rt2x00dev, INT_SOURCE_CSR, ®);
- rt2x00mmio_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
-
- if (!reg)
- return IRQ_NONE;
-
- if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
- return IRQ_HANDLED;
-
- /*
- * Since INT_MASK_CSR and INT_SOURCE_CSR use the same bits
- * for interrupts and interrupt masks we can just use the value of
- * INT_SOURCE_CSR to create the interrupt mask.
- */
- mask = ~reg;
-
- if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS)) {
- rt2800mmio_txstatus_interrupt(rt2x00dev);
- /*
- * Never disable the TX_FIFO_STATUS interrupt.
- */
- rt2x00_set_field32(&mask, INT_MASK_CSR_TX_FIFO_STATUS, 1);
- }
-
- if (rt2x00_get_field32(reg, INT_SOURCE_CSR_PRE_TBTT))
- tasklet_hi_schedule(&rt2x00dev->pretbtt_tasklet);
-
- if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TBTT))
- tasklet_hi_schedule(&rt2x00dev->tbtt_tasklet);
-
- if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RX_DONE))
- tasklet_schedule(&rt2x00dev->rxdone_tasklet);
-
- if (rt2x00_get_field32(reg, INT_SOURCE_CSR_AUTO_WAKEUP))
- tasklet_schedule(&rt2x00dev->autowake_tasklet);
-
- /*
- * Disable all interrupts for which a tasklet was scheduled right now,
- * the tasklet will reenable the appropriate interrupts.
- */
- spin_lock(&rt2x00dev->irqmask_lock);
- rt2x00mmio_register_read(rt2x00dev, INT_MASK_CSR, ®);
- reg &= mask;
- rt2x00mmio_register_write(rt2x00dev, INT_MASK_CSR, reg);
- spin_unlock(&rt2x00dev->irqmask_lock);
-
- return IRQ_HANDLED;
-}
-
-/*
* Device probe functions.
*/
static int rt2800pci_read_eeprom(struct rt2x00_dev *rt2x00dev)
Move the functions into a separate module, in order to make those usable from other modules. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- drivers/net/wireless/rt2x00/rt2800mmio.c | 396 ++++++++++++++++++++++++++++++ drivers/net/wireless/rt2x00/rt2800mmio.h | 9 + drivers/net/wireless/rt2x00/rt2800pci.c | 388 ----------------------------- 3 files changed, 405 insertions(+), 388 deletions(-)