| Message ID | 1386300482-3352-1-git-send-email-yeohchunyeow@gmail.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
Looks good to me. On Fri, Dec 6, 2013 at 3:28 AM, Chun-Yeow Yeoh <yeohchunyeow@gmail.com> wrote: > Enable the beaconing in wnc36xx by tweaking the tim offset and > force the use of AP-style beaconing. Otherwise, beaconing is not > working. The tim offset is set to 256. Otherwise, this will > overwrite mesh beacon submitted by mac80211. > > Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com> > --- > drivers/net/wireless/ath/wcn36xx/smd.c | 12 ++++++++---- > 1 file changed, 8 insertions(+), 4 deletions(-) > > diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c > index f8c3a10..19f43de 100644 > --- a/drivers/net/wireless/ath/wcn36xx/smd.c > +++ b/drivers/net/wireless/ath/wcn36xx/smd.c > @@ -1134,14 +1134,14 @@ int wcn36xx_smd_config_bss(struct wcn36xx *wcn, struct ieee80211_vif *vif, > /* STA */ > bss->oper_mode = 1; > bss->wcn36xx_hal_persona = WCN36XX_HAL_STA_MODE; > - } else if (vif->type == NL80211_IFTYPE_AP) { > + } else if (vif->type == NL80211_IFTYPE_AP || > + vif->type == NL80211_IFTYPE_MESH_POINT) { > bss->bss_type = WCN36XX_HAL_INFRA_AP_MODE; > > /* AP */ > bss->oper_mode = 0; > bss->wcn36xx_hal_persona = WCN36XX_HAL_STA_SAP_MODE; > - } else if (vif->type == NL80211_IFTYPE_ADHOC || > - vif->type == NL80211_IFTYPE_MESH_POINT) { > + } else if (vif->type == NL80211_IFTYPE_ADHOC) { > bss->bss_type = WCN36XX_HAL_IBSS_MODE; > > /* STA */ > @@ -1291,7 +1291,11 @@ int wcn36xx_smd_send_beacon(struct wcn36xx *wcn, struct ieee80211_vif *vif, > memcpy(msg_body.bssid, vif->addr, ETH_ALEN); > > /* TODO need to find out why this is needed? */ > - msg_body.tim_ie_offset = tim_off+4; > + if (vif->type == NL80211_IFTYPE_MESH_POINT) > + /* mesh beacon don't need this, so push further down */ > + msg_body.tim_ie_offset = 256; > + else > + msg_body.tim_ie_offset = tim_off+4; > msg_body.p2p_ie_offset = p2p_off; > PREPARE_HAL_BUF(wcn->hal_buf, msg_body); > > -- > 1.7.9.5 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-wireless" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c index f8c3a10..19f43de 100644 --- a/drivers/net/wireless/ath/wcn36xx/smd.c +++ b/drivers/net/wireless/ath/wcn36xx/smd.c @@ -1134,14 +1134,14 @@ int wcn36xx_smd_config_bss(struct wcn36xx *wcn, struct ieee80211_vif *vif, /* STA */ bss->oper_mode = 1; bss->wcn36xx_hal_persona = WCN36XX_HAL_STA_MODE; - } else if (vif->type == NL80211_IFTYPE_AP) { + } else if (vif->type == NL80211_IFTYPE_AP || + vif->type == NL80211_IFTYPE_MESH_POINT) { bss->bss_type = WCN36XX_HAL_INFRA_AP_MODE; /* AP */ bss->oper_mode = 0; bss->wcn36xx_hal_persona = WCN36XX_HAL_STA_SAP_MODE; - } else if (vif->type == NL80211_IFTYPE_ADHOC || - vif->type == NL80211_IFTYPE_MESH_POINT) { + } else if (vif->type == NL80211_IFTYPE_ADHOC) { bss->bss_type = WCN36XX_HAL_IBSS_MODE; /* STA */ @@ -1291,7 +1291,11 @@ int wcn36xx_smd_send_beacon(struct wcn36xx *wcn, struct ieee80211_vif *vif, memcpy(msg_body.bssid, vif->addr, ETH_ALEN); /* TODO need to find out why this is needed? */ - msg_body.tim_ie_offset = tim_off+4; + if (vif->type == NL80211_IFTYPE_MESH_POINT) + /* mesh beacon don't need this, so push further down */ + msg_body.tim_ie_offset = 256; + else + msg_body.tim_ie_offset = tim_off+4; msg_body.p2p_ie_offset = p2p_off; PREPARE_HAL_BUF(wcn->hal_buf, msg_body);
Enable the beaconing in wnc36xx by tweaking the tim offset and force the use of AP-style beaconing. Otherwise, beaconing is not working. The tim offset is set to 256. Otherwise, this will overwrite mesh beacon submitted by mac80211. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com> --- drivers/net/wireless/ath/wcn36xx/smd.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)