| Message ID | 1391206631-9862-4-git-send-email-mgreer@animalcreek.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
Hi Mark, On Fri, Jan 31, 2014 at 03:17:11PM -0700, Mark A. Greer wrote: > Describe the properies used by the trf7970a > RFID/NFC/15693 transceiver driver. > > Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> > --- > .../devicetree/bindings/net/nfc/trf7970a.txt | 37 ++++++++++++++++++++++ > 1 file changed, 37 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/nfc/trf7970a.txt Not a DT expert, but this looks good to me. Could you please amend this patch by adding Documentation/devicetree/bindings/net/nfc/ to the MAINTAINERS NFC section ? Cheers, Samuel.
On Fri, Feb 21, 2014 at 02:04:07AM +0100, Samuel Ortiz wrote: > Hi Mark, > > On Fri, Jan 31, 2014 at 03:17:11PM -0700, Mark A. Greer wrote: > > Describe the properies used by the trf7970a > > RFID/NFC/15693 transceiver driver. > > > > Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> > > --- > > .../devicetree/bindings/net/nfc/trf7970a.txt | 37 ++++++++++++++++++++++ > > 1 file changed, 37 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/net/nfc/trf7970a.txt > Not a DT expert, but this looks good to me. > Could you please amend this patch by adding > Documentation/devicetree/bindings/net/nfc/ to the MAINTAINERS NFC > section ? Sure. -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt new file mode 100644 index 0000000..4256893 --- /dev/null +++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt @@ -0,0 +1,37 @@ +* Texas Instruments TRF7970A RFID/NFC/15693 Transceiver + +Required properties: +- compatible: Should be "ti,trf7970a". +- spi-max-frequency: Maximum SPI frequency (<= 2000000). +- interrupt-parent: phandle of parent interrupt handler. +- interrupts: A single interrupt specifier. +- ti,enable-gpios: Two GPIO entries used for 'EN' and 'EN2' pins on the + TRF7970A. + +Optional properties: +- ti,ss-gpio: GPIO used for Slave Select pin on TRF7970A. Its presence + indicates that "SPI with SS mode" is used by the TRF7970A. + +Optional SoC Specific Properties: +- pinctrl-names: Contains only one value - "default". +- pintctrl-0: Specifies the pin control groups used for this controller. + +Example (for ARM-based BeagleBone with TRF7970A on SPI1): + +&spi1 { + status = "okay"; + + nfc@0 { + compatible = "ti,trf7970a"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&trf7970a_default>; + spi-max-frequency = <2000000>; + interrupt-parent = <&gpio2>; + interrupts = <14 0>; + ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>, + <&gpio2 5 GPIO_ACTIVE_LOW>; + ti,ss-gpio = <&gpio1 30 GPIO_ACTIVE_LOW>; + status = "okay"; + }; +};
Describe the properies used by the trf7970a RFID/NFC/15693 transceiver driver. Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> --- .../devicetree/bindings/net/nfc/trf7970a.txt | 37 ++++++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/nfc/trf7970a.txt