diff mbox

[RFC,1/2] cfg80211: Add channel flags limiting availability to OCB mode only

Message ID 1400510945-24868-2-git-send-email-rostislav.lisovy@fel.cvut.cz (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

Rostislav Lisovy May 19, 2014, 2:49 p.m. UTC 
IEEE 802.11p operates in its own 5.9GHz band. When there will
be a record for the 5.9GHz band in the regulatory daemon,
it must be limited to the OCB mode only -- using the newly
added flags.

Signed-off-by: Rostislav Lisovy <rostislav.lisovy@fel.cvut.cz>
---
 include/net/cfg80211.h       | 2 ++
 include/uapi/linux/nl80211.h | 5 +++++
 net/wireless/nl80211.c       | 3 +++
 net/wireless/reg.c           | 2 ++
 4 files changed, 12 insertions(+)

Comments

Johannes Berg May 19, 2014, 2:51 p.m. UTC | #1 
On Mon, 2014-05-19 at 16:49 +0200, Rostislav Lisovy wrote:
> IEEE 802.11p operates in its own 5.9GHz band. When there will
> be a record for the 5.9GHz band in the regulatory daemon,
> it must be limited to the OCB mode only -- using the newly
> added flags.

This patch is fine, but insufficient - you should also do something with
the new flags?

johannes

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 5c7169b..6722ab2 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -115,6 +115,7 @@  enum ieee80211_band {
  *	on this channel.
  * @IEEE80211_CHAN_NO_10MHZ: 10 MHz bandwidth is not permitted
  *	on this channel.
+ * @IEEE80211_CHAN_OCB_ONLY: only OCB is allowed on this channel.
  *
  */
 enum ieee80211_channel_flags {
@@ -131,6 +132,7 @@  enum ieee80211_channel_flags {
 	IEEE80211_CHAN_GO_CONCURRENT	= 1<<10,
 	IEEE80211_CHAN_NO_20MHZ		= 1<<11,
 	IEEE80211_CHAN_NO_10MHZ		= 1<<12,
+	IEEE80211_CHAN_OCB_ONLY         = 1<<13,
 };
 
 #define IEEE80211_CHAN_NO_HT40 \
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 406010d..970c5df 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -2362,6 +2362,8 @@  enum nl80211_band_attr {
  *	on this channel in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed
  *	on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_OCB_ONLY: no other than OCB networks are
+ *	permitted on this channel in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
  *	currently defined
  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@@ -2390,6 +2392,7 @@  enum nl80211_frequency_attr {
 	NL80211_FREQUENCY_ATTR_GO_CONCURRENT,
 	NL80211_FREQUENCY_ATTR_NO_20MHZ,
 	NL80211_FREQUENCY_ATTR_NO_10MHZ,
+	NL80211_FREQUENCY_ATTR_OCB_ONLY,
 
 	/* keep last */
 	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
@@ -2558,6 +2561,7 @@  enum nl80211_sched_scan_match_attr {
  * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
  *	base on contiguous rules and wider channels will be allowed to cross
  *	multiple contiguous/overlapping frequency ranges.
+ * @NL80211_RRF_OCB_ONLY: no other than OCB is allowed
  */
 enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_OFDM		= 1<<0,
@@ -2570,6 +2574,7 @@  enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_IR		= 1<<7,
 	__NL80211_RRF_NO_IBSS		= 1<<8,
 	NL80211_RRF_AUTO_BW		= 1<<11,
+	NL80211_RRF_OCB_ONLY            = 1<<12,
 };
 
 #define NL80211_RRF_PASSIVE_SCAN	NL80211_RRF_NO_IR
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 0f1b18f2..c766c31 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -633,6 +633,9 @@  static int nl80211_msg_put_channel(struct sk_buff *msg,
 		if ((chan->flags & IEEE80211_CHAN_NO_10MHZ) &&
 		    nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_10MHZ))
 			goto nla_put_failure;
+		if ((chan->flags & IEEE80211_CHAN_OCB_ONLY) &&
+		    nla_put_flag(msg, NL80211_FREQUENCY_ATTR_OCB_ONLY))
+			goto nla_put_failure;
 	}
 
 	if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index e78f532..74e41f7 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -906,6 +906,8 @@  static u32 map_regdom_flags(u32 rd_flags)
 		channel_flags |= IEEE80211_CHAN_NO_OFDM;
 	if (rd_flags & NL80211_RRF_NO_OUTDOOR)
 		channel_flags |= IEEE80211_CHAN_INDOOR_ONLY;
+	if (rd_flags & NL80211_RRF_OCB_ONLY)
+		channel_flags |= IEEE80211_CHAN_OCB_ONLY;
 	return channel_flags;
 }