@@ -97,9 +97,13 @@ struct b43_tx_legacy_rate_phy_ctl_entry {
};
/* MAC TX control */
+#define B43_TXH_MAC_RTS_FB_SHORTPRMBL 0x80000000 /* RTS fallback preamble */
+#define B43_TXH_MAC_RTS_SHORTPRMBL 0x40000000 /* RTS main rate preamble */
+#define B43_TXH_MAC_FB_SHORTPRMBL 0x20000000 /* Main fallback preamble */
#define B43_TXH_MAC_USEFBR 0x10000000 /* Use fallback rate for this AMPDU */
#define B43_TXH_MAC_KEYIDX 0x0FF00000 /* Security key index */
#define B43_TXH_MAC_KEYIDX_SHIFT 20
+#define B43_TXH_MAC_ALT_TXPWR 0x00080000 /* Use alternate txpwr defined at loc. M_ALT_TXPWR_IDX */
#define B43_TXH_MAC_KEYALG 0x00070000 /* Security key algorithm */
#define B43_TXH_MAC_KEYALG_SHIFT 16
#define B43_TXH_MAC_AMIC 0x00008000 /* AMIC */
@@ -126,25 +130,25 @@ struct b43_tx_legacy_rate_phy_ctl_entry {
#define B43_TXH_EFT_FB 0x03 /* Data frame fallback encoding */
#define B43_TXH_EFT_FB_CCK 0x00 /* CCK */
#define B43_TXH_EFT_FB_OFDM 0x01 /* OFDM */
-#define B43_TXH_EFT_FB_EWC 0x02 /* EWC */
-#define B43_TXH_EFT_FB_N 0x03 /* N */
+#define B43_TXH_EFT_FB_HT 0x02 /* HT */
+#define B43_TXH_EFT_FB_VHT 0x03 /* VHT */
#define B43_TXH_EFT_RTS 0x0C /* RTS/CTS encoding */
#define B43_TXH_EFT_RTS_CCK 0x00 /* CCK */
#define B43_TXH_EFT_RTS_OFDM 0x04 /* OFDM */
-#define B43_TXH_EFT_RTS_EWC 0x08 /* EWC */
-#define B43_TXH_EFT_RTS_N 0x0C /* N */
+#define B43_TXH_EFT_RTS_HT 0x08 /* HT */
+#define B43_TXH_EFT_RTS_VHT 0x0C /* VHT */
#define B43_TXH_EFT_RTSFB 0x30 /* RTS/CTS fallback encoding */
#define B43_TXH_EFT_RTSFB_CCK 0x00 /* CCK */
#define B43_TXH_EFT_RTSFB_OFDM 0x10 /* OFDM */
-#define B43_TXH_EFT_RTSFB_EWC 0x20 /* EWC */
-#define B43_TXH_EFT_RTSFB_N 0x30 /* N */
+#define B43_TXH_EFT_RTSFB_HT 0x20 /* HT */
+#define B43_TXH_EFT_RTSFB_VHT 0x30 /* VHT */
/* PHY TX control word */
#define B43_TXH_PHY_ENC 0x0003 /* Data frame encoding */
#define B43_TXH_PHY_ENC_CCK 0x0000 /* CCK */
#define B43_TXH_PHY_ENC_OFDM 0x0001 /* OFDM */
-#define B43_TXH_PHY_ENC_EWC 0x0002 /* EWC */
-#define B43_TXH_PHY_ENC_N 0x0003 /* N */
+#define B43_TXH_PHY_ENC_HT 0x0002 /* HT */
+#define B43_TXH_PHY_ENC_VHT 0x0003 /* VHT */
#define B43_TXH_PHY_SHORTPRMBL 0x0010 /* Use short preamble */
#define B43_TXH_PHY_ANT 0x03C0 /* Antenna selection */
#define B43_TXH_PHY_ANT0 0x0000 /* Use antenna 0 */
@@ -162,7 +166,7 @@ struct b43_tx_legacy_rate_phy_ctl_entry {
#define B43_TXH_PHY1_BW_20 0x0002 /* 20 MHz */
#define B43_TXH_PHY1_BW_20U 0x0003 /* 20 MHz upper */
#define B43_TXH_PHY1_BW_40 0x0004 /* 40 MHz */
-#define B43_TXH_PHY1_BW_40DUP 0x0005 /* 50 MHz duplicate */
+#define B43_TXH_PHY1_BW_40DUP 0x0005 /* 40 MHz duplicate */
#define B43_TXH_PHY1_MODE 0x0038 /* Mode */
#define B43_TXH_PHY1_MODE_SISO 0x0000 /* SISO */
#define B43_TXH_PHY1_MODE_CDD 0x0008 /* CDD */
Some constants were missing and are added now. The rate mode was renamed, at least the ucode in brcsmac uses 2 for HT rates (iee80211n) and the more recent ucodes are using 3 for VHT (ieee80211ac). Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> --- drivers/net/wireless/b43/xmit.h | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-)