@@ -262,7 +262,7 @@ static int ath9k_hw_def_check_eeprom(struct ath_hw *ah)
{
struct ar5416_eeprom_def *eep = &ah->eeprom.def;
struct ath_common *common = ath9k_hw_common(ah);
- u16 *eepdata, temp, magic, magic2;
+ u16 *eepdata, temp, magic;
u32 sum = 0, el;
bool need_swap = false;
int i, addr, size;
@@ -272,27 +272,16 @@ static int ath9k_hw_def_check_eeprom(struct ath_hw *ah)
return false;
}
- if (!ath9k_hw_use_flash(ah)) {
- ath_dbg(common, EEPROM, "Read Magic = 0x%04X\n", magic);
-
- if (magic != AR5416_EEPROM_MAGIC) {
- magic2 = swab16(magic);
-
- if (magic2 == AR5416_EEPROM_MAGIC) {
- size = sizeof(struct ar5416_eeprom_def);
- need_swap = true;
- eepdata = (u16 *) (&ah->eeprom);
+ if (swab16(magic) == AR5416_EEPROM_MAGIC &&
+ !(ah->ah_flags & AH_NO_EEP_SWAP)) {
+ size = sizeof(struct ar5416_eeprom_def);
+ need_swap = true;
+ eepdata = (u16 *) (&ah->eeprom);
- for (addr = 0; addr < size / sizeof(u16); addr++) {
- temp = swab16(*eepdata);
- *eepdata = temp;
- eepdata++;
- }
- } else {
- ath_err(common,
- "Invalid EEPROM Magic. Endianness mismatch.\n");
- return -EINVAL;
- }
+ for (addr = 0; addr < size / sizeof(u16); addr++) {
+ temp = swab16(*eepdata);
+ *eepdata = temp;
+ eepdata++;
}
}
@@ -731,6 +731,7 @@ enum ath_cal_list {
#define AH_USE_EEPROM 0x1
#define AH_UNPLUGGED 0x2 /* The card has been physically removed. */
#define AH_FASTCC 0x4
+#define AH_NO_EEP_SWAP 0x8 /* Do not swap EEPROM data */
struct ath_hw {
struct ath_ops reg_ops;
@@ -531,6 +531,8 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc,
ah->is_clk_25mhz = pdata->is_clk_25mhz;
ah->get_mac_revision = pdata->get_mac_revision;
ah->external_reset = pdata->external_reset;
+ if (!pdata->endian_check)
+ ah->ah_flags |= AH_NO_EEP_SWAP;
}
common->ops = &ah->reg_ops;
@@ -31,6 +31,7 @@ struct ath9k_platform_data {
u32 gpio_mask;
u32 gpio_val;
+ bool endian_check;
bool is_clk_25mhz;
bool tx_gain_buffalo;
On some devices (especially little-endian ones), the flash EEPROM data has a different endian, which needs to be detected. Add a flag to the platform data to allow overriding that behavior Signed-off-by: Felix Fietkau <nbd@openwrt.org> --- drivers/net/wireless/ath/ath9k/eeprom_def.c | 31 ++++++++++------------------- drivers/net/wireless/ath/ath9k/hw.h | 1 + drivers/net/wireless/ath/ath9k/init.c | 2 ++ include/linux/ath9k_platform.h | 1 + 4 files changed, 14 insertions(+), 21 deletions(-)