@@ -1359,6 +1359,16 @@ struct mesh_setup {
};
/**
+ * struct ocb_setup - 802.11p OCB mode setup configuration
+ * @chandef: defines the channel to use
+ *
+ * These parameters are fixed when connecting to the network
+ */
+struct ocb_setup {
+ struct cfg80211_chan_def chandef;
+};
+
+/**
* struct ieee80211_txq_params - TX queue parameters
* @ac: AC identifier
* @txop: Maximum burst time in units of 32 usecs, 0 meaning disabled
@@ -2433,6 +2443,10 @@ struct cfg80211_ops {
const struct mesh_setup *setup);
int (*leave_mesh)(struct wiphy *wiphy, struct net_device *dev);
+ int (*join_ocb)(struct wiphy *wiphy, struct net_device *dev,
+ struct ocb_setup *setup);
+ int (*leave_ocb)(struct wiphy *wiphy, struct net_device *dev);
+
int (*change_bss)(struct wiphy *wiphy, struct net_device *dev,
struct bss_parameters *params);
@@ -746,6 +746,11 @@
* destination %NL80211_ATTR_MAC on the interface identified by
* %NL80211_ATTR_IFINDEX.
*
+ * @NL80211_CMD_JOIN_OCB: Join the OCB network. The center frequency and
+ * bandwidth of a channel must be given.
+ * @NL80211_CMD_LEAVE_OCB: Leave the OCB network -- no special arguments, the
+ * network is determined by the network interface.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -922,6 +927,9 @@ enum nl80211_commands {
NL80211_CMD_GET_MPP,
+ NL80211_CMD_JOIN_OCB,
+ NL80211_CMD_LEAVE_OCB,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -2074,6 +2082,8 @@ enum nl80211_attrs {
* and therefore can't be created in the normal ways, use the
* %NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE
* commands to create and destroy one
+ * @NL80211_IF_TYPE_OCB: Outside Context of a BSS
+ * This mode corresponds to the MIB variable dot11OCBActivated=true
* @NL80211_IFTYPE_MAX: highest interface type number currently defined
* @NUM_NL80211_IFTYPES: number of defined interface types
*
@@ -2093,6 +2103,7 @@ enum nl80211_iftype {
NL80211_IFTYPE_P2P_CLIENT,
NL80211_IFTYPE_P2P_GO,
NL80211_IFTYPE_P2P_DEVICE,
+ NL80211_IFTYPE_OCB,
/* keep last */
NUM_NL80211_IFTYPES,
@@ -230,6 +230,7 @@ static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev,
case NUM_NL80211_IFTYPES:
case NL80211_IFTYPE_P2P_CLIENT:
case NL80211_IFTYPE_P2P_GO:
+ case NL80211_IFTYPE_OCB:
/* shouldn't happen */
WARN_ON_ONCE(1);
break;
@@ -270,6 +270,7 @@ ieee80211_get_chanctx_max_required_bw(struct ieee80211_local *local,
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_WDS:
case NL80211_IFTYPE_MESH_POINT:
+ case NL80211_IFTYPE_OCB:
width = vif->bss_conf.chandef.width;
break;
case NL80211_IFTYPE_UNSPECIFIED:
@@ -909,6 +910,7 @@ ieee80211_vif_chanctx_reservation_complete(struct ieee80211_sub_if_data *sdata)
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_MESH_POINT:
+ case NL80211_IFTYPE_OCB:
ieee80211_queue_work(&sdata->local->hw,
&sdata->csa_finalize_work);
break;
@@ -521,6 +521,7 @@ int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up)
case NL80211_IFTYPE_MONITOR:
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_P2P_DEVICE:
+ case NL80211_IFTYPE_OCB:
/* no special treatment */
break;
case NL80211_IFTYPE_UNSPECIFIED:
@@ -631,6 +632,7 @@ int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up)
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_MESH_POINT:
+ case NL80211_IFTYPE_OCB:
netif_carrier_off(dev);
break;
case NL80211_IFTYPE_WDS:
@@ -1351,6 +1353,9 @@ static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata,
sdata->vif.bss_conf.bssid = sdata->u.mgd.bssid;
ieee80211_sta_setup_sdata(sdata);
break;
+ case NL80211_IFTYPE_OCB:
+ /* to be implemented in the future */
+ break;
case NL80211_IFTYPE_ADHOC:
sdata->vif.bss_conf.bssid = sdata->u.ibss.bssid;
ieee80211_ibss_setup_sdata(sdata);
@@ -1841,6 +1841,9 @@ int ieee80211_reconfig(struct ieee80211_local *local)
ieee80211_bss_info_change_notify(sdata, changed);
sdata_unlock(sdata);
break;
+ case NL80211_IFTYPE_OCB:
+ /* to be implemented in the future */
+ break;
case NL80211_IFTYPE_ADHOC:
changed |= BSS_CHANGED_IBSS;
/* fall through */
@@ -10,7 +10,7 @@ obj-$(CONFIG_WEXT_SPY) += wext-spy.o
obj-$(CONFIG_WEXT_PRIV) += wext-priv.o
cfg80211-y += core.o sysfs.o radiotap.o util.o reg.o scan.o nl80211.o
-cfg80211-y += mlme.o ibss.o sme.o chan.o ethtool.o mesh.o ap.o trace.o
+cfg80211-y += mlme.o ibss.o sme.o chan.o ethtool.o mesh.o ap.o trace.o ocb.o
cfg80211-$(CONFIG_CFG80211_DEBUGFS) += debugfs.o
cfg80211-$(CONFIG_CFG80211_WEXT) += wext-compat.o wext-sme.o
cfg80211-$(CONFIG_CFG80211_INTERNAL_REGDB) += regdb.o
@@ -366,6 +366,7 @@ int cfg80211_chandef_dfs_required(struct wiphy *wiphy,
break;
case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_OCB:
case NL80211_IFTYPE_P2P_CLIENT:
case NL80211_IFTYPE_MONITOR:
case NL80211_IFTYPE_AP_VLAN:
@@ -892,6 +893,13 @@ cfg80211_get_chan_state(struct wireless_dev *wdev,
*radar_detect |= BIT(wdev->chandef.width);
}
return;
+ case NL80211_IFTYPE_OCB:
+ if (wdev->chandef.chan) {
+ *chan = wdev->chandef.chan;
+ *chanmode = CHAN_MODE_SHARED;
+ return;
+ }
+ break;
case NL80211_IFTYPE_MONITOR:
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_WDS:
@@ -869,6 +869,9 @@ void __cfg80211_leave(struct cfg80211_registered_device *rdev,
case NL80211_IFTYPE_P2P_GO:
__cfg80211_stop_ap(rdev, dev, true);
break;
+ case NL80211_IFTYPE_OCB:
+ __cfg80211_leave_ocb(rdev, dev);
+ break;
case NL80211_IFTYPE_WDS:
/* must be handled by mac80211/driver, has no APIs */
break;
@@ -290,6 +290,18 @@ int cfg80211_set_mesh_channel(struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev,
struct cfg80211_chan_def *chandef);
+/* OCB */
+int __cfg80211_join_ocb(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ struct ocb_setup *setup);
+int cfg80211_join_ocb(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ struct ocb_setup *setup);
+int __cfg80211_leave_ocb(struct cfg80211_registered_device *rdev,
+ struct net_device *dev);
+int cfg80211_leave_ocb(struct cfg80211_registered_device *rdev,
+ struct net_device *dev);
+
/* AP */
int __cfg80211_stop_ap(struct cfg80211_registered_device *rdev,
struct net_device *dev, bool notify);
@@ -885,6 +885,7 @@ static int nl80211_key_allowed(struct wireless_dev *wdev)
return -ENOLINK;
break;
case NL80211_IFTYPE_UNSPECIFIED:
+ case NL80211_IFTYPE_OCB:
case NL80211_IFTYPE_MONITOR:
case NL80211_IFTYPE_P2P_DEVICE:
case NL80211_IFTYPE_WDS:
@@ -8275,6 +8276,28 @@ static int nl80211_set_cqm(struct sk_buff *skb, struct genl_info *info)
return -EINVAL;
}
+static int nl80211_join_ocb(struct sk_buff *skb, struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct net_device *dev = info->user_ptr[1];
+ struct ocb_setup setup = {};
+ int err;
+
+ err = nl80211_parse_chandef(rdev, info, &setup.chandef);
+ if (err)
+ return err;
+
+ return cfg80211_join_ocb(rdev, dev, &setup);
+}
+
+static int nl80211_leave_ocb(struct sk_buff *skb, struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct net_device *dev = info->user_ptr[1];
+
+ return cfg80211_leave_ocb(rdev, dev);
+}
+
static int nl80211_join_mesh(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
@@ -10218,6 +10241,22 @@ static const struct genl_ops nl80211_ops[] = {
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
+ {
+ .cmd = NL80211_CMD_JOIN_OCB,
+ .doit = nl80211_join_ocb,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
+ NL80211_FLAG_NEED_RTNL,
+ },
+ {
+ .cmd = NL80211_CMD_LEAVE_OCB,
+ .doit = nl80211_leave_ocb,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
+ NL80211_FLAG_NEED_RTNL,
+ },
#ifdef CONFIG_PM
{
.cmd = NL80211_CMD_GET_WOWLAN,
new file mode 100644
@@ -0,0 +1,88 @@
+/*
+ * OCB mode implementation
+ *
+ * Copyright: (c) 2014 Czech Technical University in Prague
+ * (c) 2014 Volkswagen Group Research
+ * Author: Rostislav Lisovy <rostislav.lisovy@fel.cvut.cz>
+ * Funded by: Volkswagen Group Research
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/ieee80211.h>
+#include <net/cfg80211.h>
+#include "nl80211.h"
+#include "core.h"
+#include "rdev-ops.h"
+
+int __cfg80211_join_ocb(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ struct ocb_setup *setup)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ int err;
+
+ ASSERT_WDEV_LOCK(wdev);
+
+ if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_OCB)
+ return -EOPNOTSUPP;
+
+ if (WARN_ON(!setup->chandef.chan))
+ return -EINVAL;
+
+ err = rdev_join_ocb(rdev, dev, setup);
+ if (!err)
+ wdev->chandef = setup->chandef;
+
+ return err;
+}
+
+int cfg80211_join_ocb(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ struct ocb_setup *setup)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ int err;
+
+ wdev_lock(wdev);
+ err = __cfg80211_join_ocb(rdev, dev, setup);
+ wdev_unlock(wdev);
+
+ return err;
+}
+
+int __cfg80211_leave_ocb(struct cfg80211_registered_device *rdev,
+ struct net_device *dev)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ int err;
+
+ ASSERT_WDEV_LOCK(wdev);
+
+ if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_OCB)
+ return -EOPNOTSUPP;
+
+ if (!rdev->ops->leave_ocb)
+ return -EOPNOTSUPP;
+
+ err = rdev_leave_ocb(rdev, dev);
+ if (!err)
+ memset(&wdev->chandef, 0, sizeof(wdev->chandef));
+
+ return err;
+}
+
+int cfg80211_leave_ocb(struct cfg80211_registered_device *rdev,
+ struct net_device *dev)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ int err;
+
+ wdev_lock(wdev);
+ err = __cfg80211_leave_ocb(rdev, dev);
+ wdev_unlock(wdev);
+
+ return err;
+}
@@ -348,6 +348,27 @@ static inline int rdev_leave_mesh(struct cfg80211_registered_device *rdev,
return ret;
}
+static inline int rdev_join_ocb(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ struct ocb_setup *setup)
+{
+ int ret;
+ trace_rdev_join_ocb(&rdev->wiphy, dev, setup);
+ ret = rdev->ops->join_ocb(&rdev->wiphy, dev, setup);
+ trace_rdev_return_int(&rdev->wiphy, ret);
+ return ret;
+}
+
+static inline int rdev_leave_ocb(struct cfg80211_registered_device *rdev,
+ struct net_device *dev)
+{
+ int ret;
+ trace_rdev_leave_ocb(&rdev->wiphy, dev);
+ ret = rdev->ops->leave_ocb(&rdev->wiphy, dev);
+ trace_rdev_return_int(&rdev->wiphy, ret);
+ return ret;
+}
+
static inline int rdev_change_bss(struct cfg80211_registered_device *rdev,
struct net_device *dev,
struct bss_parameters *params)
@@ -600,6 +600,11 @@ DEFINE_EVENT(wiphy_netdev_evt, rdev_leave_ibss,
TP_ARGS(wiphy, netdev)
);
+DEFINE_EVENT(wiphy_netdev_evt, rdev_leave_ocb,
+ TP_PROTO(struct wiphy *wiphy, struct net_device *netdev),
+ TP_ARGS(wiphy, netdev)
+);
+
DEFINE_EVENT(wiphy_netdev_evt, rdev_flush_pmksa,
TP_PROTO(struct wiphy *wiphy, struct net_device *netdev),
TP_ARGS(wiphy, netdev)
@@ -1316,6 +1321,22 @@ TRACE_EVENT(rdev_join_ibss,
WIPHY_PR_ARG, NETDEV_PR_ARG, MAC_PR_ARG(bssid), __entry->ssid)
);
+TRACE_EVENT(rdev_join_ocb,
+ TP_PROTO(struct wiphy *wiphy, struct net_device *netdev,
+ const struct ocb_setup *setup),
+ TP_ARGS(wiphy, netdev, setup),
+ TP_STRUCT__entry(
+ WIPHY_ENTRY
+ NETDEV_ENTRY
+ ),
+ TP_fast_assign(
+ WIPHY_ASSIGN;
+ NETDEV_ASSIGN;
+ ),
+ TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT,
+ WIPHY_PR_ARG, NETDEV_PR_ARG)
+);
+
TRACE_EVENT(rdev_set_wiphy_params,
TP_PROTO(struct wiphy *wiphy, u32 changed),
TP_ARGS(wiphy, changed),
@@ -442,7 +442,8 @@ int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr,
break;
case cpu_to_le16(0):
if (iftype != NL80211_IFTYPE_ADHOC &&
- iftype != NL80211_IFTYPE_STATION)
+ iftype != NL80211_IFTYPE_STATION &&
+ iftype != NL80211_IFTYPE_OCB)
return -1;
break;
}
@@ -519,6 +520,7 @@ int ieee80211_data_from_8023(struct sk_buff *skb, const u8 *addr,
memcpy(hdr.addr3, skb->data, ETH_ALEN);
hdrlen = 24;
break;
+ case NL80211_IFTYPE_OCB:
case NL80211_IFTYPE_ADHOC:
/* DA SA BSSID */
memcpy(hdr.addr1, skb->data, ETH_ALEN);
@@ -937,6 +939,7 @@ int cfg80211_change_iface(struct cfg80211_registered_device *rdev,
if (dev->ieee80211_ptr->use_4addr)
break;
/* fall through */
+ case NL80211_IFTYPE_OCB:
case NL80211_IFTYPE_P2P_CLIENT:
case NL80211_IFTYPE_ADHOC:
dev->priv_flags |= IFF_DONT_BRIDGE;
This patch adds new iface type (NL80211_IFTYPE_OCB) representing the OCB (Outside the Context of a BSS) mode. When establishing a connection to the network a cfg80211_join_ocb function is called (particular nl80211_command is added as well). A mandatory parameters during the ocb_join operation are 'center frequency' and 'channel width (5/10 MHz)'. Changes done in mac80211 are minimal possible required to avoid many warnings (warning: enumeration value 'NL80211_IFTYPE_OCB' not handled in switch) during compilation. Full functionality (where needed) is added in the following patch. Signed-off-by: Rostislav Lisovy <rostislav.lisovy@fel.cvut.cz> --- include/net/cfg80211.h | 14 +++++++ include/uapi/linux/nl80211.h | 11 ++++++ net/mac80211/cfg.c | 1 + net/mac80211/chan.c | 2 + net/mac80211/iface.c | 5 +++ net/mac80211/util.c | 3 ++ net/wireless/Makefile | 2 +- net/wireless/chan.c | 8 ++++ net/wireless/core.c | 3 ++ net/wireless/core.h | 12 ++++++ net/wireless/nl80211.c | 39 ++++++++++++++++++++ net/wireless/ocb.c | 88 ++++++++++++++++++++++++++++++++++++++++++++ net/wireless/rdev-ops.h | 21 +++++++++++ net/wireless/trace.h | 21 +++++++++++ net/wireless/util.c | 5 ++- 15 files changed, 233 insertions(+), 2 deletions(-) create mode 100644 net/wireless/ocb.c