@@ -2367,6 +2367,12 @@ struct cfg80211_qos_map {
* (invoked with the wireless_dev mutex held)
* @leave_ocb: leave the current OCB network
* (invoked with the wireless_dev mutex held)
+ *
+ * @tdls_channel_switch: Start channel-switching with a TDLS peer. The driver
+ * is responsible for continually initiating channel-switching operations
+ * and returning to the base channel for communication with the AP.
+ * @tdls_cancel_channel_switch: Stop channel-switching with a TDLS peer. Both
+ * peers must be on the base channel when the call completes.
*/
struct cfg80211_ops {
int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -2622,6 +2628,14 @@ struct cfg80211_ops {
u16 admitted_time);
int (*del_tx_ts)(struct wiphy *wiphy, struct net_device *dev,
u8 tsid, const u8 *peer);
+
+ int (*tdls_channel_switch)(struct wiphy *wiphy,
+ struct net_device *dev,
+ const u8 *addr, u8 oper_class,
+ struct cfg80211_chan_def *chandef);
+ void (*tdls_cancel_channel_switch)(struct wiphy *wiphy,
+ struct net_device *dev,
+ const u8 *addr);
};
/*
@@ -762,6 +762,18 @@
* @NL80211_CMD_LEAVE_OCB: Leave the OCB network -- no special arguments, the
* network is determined by the network interface.
*
+ * @NL80211_CMD_TDLS_CHANNEL_SWITCH: Start channel-switching with a TDLS peer,
+ * identified by the %NL80211_ATTR_MAC parameter. A target channel is
+ * provided via %NL80211_ATTR_WIPHY_FREQ and other attributes determining
+ * channel width/type. The target operating class is given via
+ * %NL80211_ATTR_OPER_CLASS.
+ * The driver is responsible for continually initiating channel-switching
+ * operations and returning to the base channel for communication with the
+ * AP.
+ * @NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH: Stop channel-switching with a TDLS
+ * peer given by %NL80211_ATTR_MAC. Both peers must be on the base channel
+ * when this command completes.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -943,6 +955,9 @@ enum nl80211_commands {
NL80211_CMD_CH_SWITCH_STARTED_NOTIFY,
+ NL80211_CMD_TDLS_CHANNEL_SWITCH,
+ NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -1669,6 +1684,8 @@ enum nl80211_commands {
* @NL80211_ATTR_SMPS_MODE: SMPS mode to use (ap mode). see
* &enum nl80211_smps_mode.
*
+ * @NL80211_ATTR_OPER_CLASS: operating class
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -2021,6 +2038,8 @@ enum nl80211_attrs {
NL80211_ATTR_SMPS_MODE,
+ NL80211_ATTR_OPER_CLASS,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -541,6 +541,10 @@ int wiphy_register(struct wiphy *wiphy)
!wiphy->wowlan->tcp))
return -EINVAL;
#endif
+ if (WARN_ON((wiphy->features & NL80211_FEATURE_TDLS_CHANNEL_SWITCH) &&
+ (!rdev->ops->tdls_channel_switch ||
+ !rdev->ops->tdls_cancel_channel_switch)))
+ return -EINVAL;
if (WARN_ON(wiphy->coalesce &&
(!wiphy->coalesce->n_rules ||
@@ -9658,6 +9658,98 @@ static int nl80211_del_tx_ts(struct sk_buff *skb, struct genl_info *info)
return err;
}
+static int nl80211_tdls_channel_switch(struct sk_buff *skb,
+ struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct net_device *dev = info->user_ptr[1];
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct cfg80211_chan_def chandef = {};
+ const u8 *addr;
+ u8 oper_class;
+ int err;
+
+ if (!rdev->ops->tdls_channel_switch ||
+ !(rdev->wiphy.features & NL80211_FEATURE_TDLS_CHANNEL_SWITCH))
+ return -EOPNOTSUPP;
+
+ switch (dev->ieee80211_ptr->iftype) {
+ case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_P2P_CLIENT:
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ if (!info->attrs[NL80211_ATTR_MAC] ||
+ !info->attrs[NL80211_ATTR_OPER_CLASS])
+ return -EINVAL;
+
+ err = nl80211_parse_chandef(rdev, info, &chandef);
+ if (err)
+ return err;
+
+ /*
+ * Don't allow wide channels on the 2.4Ghz band, as per IEEE802.11-2012
+ * section 10.22.6.2.1. Disallow 5/10Mhz channels as well for now, the
+ * specification is not defined for them.
+ */
+ if (chandef.chan->band == IEEE80211_BAND_2GHZ &&
+ chandef.width != NL80211_CHAN_WIDTH_20_NOHT &&
+ chandef.width != NL80211_CHAN_WIDTH_20)
+ return -EINVAL;
+
+ /* we will be active on the TDLS link */
+ if (!cfg80211_reg_can_beacon(&rdev->wiphy, &chandef, wdev->iftype))
+ return -EINVAL;
+
+ /* don't allow switching to DFS channels */
+ if (cfg80211_chandef_dfs_required(wdev->wiphy, &chandef, wdev->iftype))
+ return -EINVAL;
+
+ addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
+ oper_class = nla_get_u8(info->attrs[NL80211_ATTR_OPER_CLASS]);
+
+ wdev_lock(wdev);
+ err = rdev_tdls_channel_switch(rdev, dev, addr, oper_class, &chandef);
+ wdev_unlock(wdev);
+
+ return err;
+}
+
+static int nl80211_tdls_cancel_channel_switch(struct sk_buff *skb,
+ struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct net_device *dev = info->user_ptr[1];
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ const u8 *addr;
+
+ if (!rdev->ops->tdls_channel_switch ||
+ !rdev->ops->tdls_cancel_channel_switch ||
+ !(rdev->wiphy.features & NL80211_FEATURE_TDLS_CHANNEL_SWITCH))
+ return -EOPNOTSUPP;
+
+ switch (dev->ieee80211_ptr->iftype) {
+ case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_P2P_CLIENT:
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ if (!info->attrs[NL80211_ATTR_MAC])
+ return -EINVAL;
+
+ addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
+
+ wdev_lock(wdev);
+ rdev_tdls_cancel_channel_switch(rdev, dev, addr);
+ wdev_unlock(wdev);
+
+ return 0;
+}
+
#define NL80211_FLAG_NEED_WIPHY 0x01
#define NL80211_FLAG_NEED_NETDEV 0x02
#define NL80211_FLAG_NEED_RTNL 0x04
@@ -10456,6 +10548,22 @@ static const struct genl_ops nl80211_ops[] = {
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
+ {
+ .cmd = NL80211_CMD_TDLS_CHANNEL_SWITCH,
+ .doit = nl80211_tdls_channel_switch,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
+ NL80211_FLAG_NEED_RTNL,
+ },
+ {
+ .cmd = NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH,
+ .doit = nl80211_tdls_cancel_channel_switch,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
+ NL80211_FLAG_NEED_RTNL,
+ },
};
/* notification functions */
@@ -993,4 +993,28 @@ rdev_del_tx_ts(struct cfg80211_registered_device *rdev,
return ret;
}
+static inline int
+rdev_tdls_channel_switch(struct cfg80211_registered_device *rdev,
+ struct net_device *dev, const u8 *addr,
+ u8 oper_class, struct cfg80211_chan_def *chandef)
+{
+ int ret;
+
+ trace_rdev_tdls_channel_switch(&rdev->wiphy, dev, addr, oper_class,
+ chandef);
+ ret = rdev->ops->tdls_channel_switch(&rdev->wiphy, dev, addr,
+ oper_class, chandef);
+ trace_rdev_return_int(&rdev->wiphy, ret);
+ return ret;
+}
+
+static inline void
+rdev_tdls_cancel_channel_switch(struct cfg80211_registered_device *rdev,
+ struct net_device *dev, const u8 *addr)
+{
+ trace_rdev_tdls_cancel_channel_switch(&rdev->wiphy, dev, addr);
+ rdev->ops->tdls_cancel_channel_switch(&rdev->wiphy, dev, addr);
+ trace_rdev_return_void(&rdev->wiphy);
+}
+
#endif /* __CFG80211_RDEV_OPS */
@@ -2032,6 +2032,48 @@ TRACE_EVENT(rdev_del_tx_ts,
WIPHY_PR_ARG, NETDEV_PR_ARG, MAC_PR_ARG(peer), __entry->tsid)
);
+TRACE_EVENT(rdev_tdls_channel_switch,
+ TP_PROTO(struct wiphy *wiphy, struct net_device *netdev,
+ const u8 *addr, u8 oper_class,
+ struct cfg80211_chan_def *chandef),
+ TP_ARGS(wiphy, netdev, addr, oper_class, chandef),
+ TP_STRUCT__entry(
+ WIPHY_ENTRY
+ NETDEV_ENTRY
+ MAC_ENTRY(addr)
+ __field(u8, oper_class)
+ CHAN_DEF_ENTRY
+ ),
+ TP_fast_assign(
+ WIPHY_ASSIGN;
+ NETDEV_ASSIGN;
+ MAC_ASSIGN(addr, addr);
+ CHAN_DEF_ASSIGN(chandef);
+ ),
+ TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", " MAC_PR_FMT
+ " oper class %d, " CHAN_DEF_PR_FMT,
+ WIPHY_PR_ARG, NETDEV_PR_ARG, MAC_PR_ARG(addr),
+ __entry->oper_class, CHAN_DEF_PR_ARG)
+);
+
+TRACE_EVENT(rdev_tdls_cancel_channel_switch,
+ TP_PROTO(struct wiphy *wiphy, struct net_device *netdev,
+ const u8 *addr),
+ TP_ARGS(wiphy, netdev, addr),
+ TP_STRUCT__entry(
+ WIPHY_ENTRY
+ NETDEV_ENTRY
+ MAC_ENTRY(addr)
+ ),
+ TP_fast_assign(
+ WIPHY_ASSIGN;
+ NETDEV_ASSIGN;
+ MAC_ASSIGN(addr, addr);
+ ),
+ TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", " MAC_PR_FMT,
+ WIPHY_PR_ARG, NETDEV_PR_ARG, MAC_PR_ARG(addr))
+);
+
/*************************************************************
* cfg80211 exported functions traces *
*************************************************************/