diff mbox

[2/5] ath10k: fix STA u-APSD

Message ID 1418214714-29689-3-git-send-email-michal.kazior@tieto.com (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

Michal Kazior Dec. 10, 2014, 12:31 p.m. UTC
To comply with WMM-PS the device shouldn't wake up
with a NullFunc frame pair when tx-ing. Instead PM
bit on each tx frame should be used.

To make this work correctly firmware needs to be
told to use a different STA PS wake threshold when
u-APSD is enabled.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 41 ++++++++++++++++++++++++++++++-----
 1 file changed, 35 insertions(+), 6 deletions(-)

Comments

Michal Kazior Dec. 11, 2014, 9:56 a.m. UTC | #1
On 10 December 2014 at 13:31, Michal Kazior <michal.kazior@tieto.com> wrote:
[...]
> @@ -3036,14 +3061,11 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
>                         goto err_peer_delete;
>                 }
>
> -               param = WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD;
> -               value = WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS;
> -               ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
> -                                                 param, value);
> +               ret = ath10k_mac_vif_recalc_ps_wake_threshold(arvif);
>                 if (ret) {
> -                       ath10k_warn(ar, "failed to set vdev %i TX wake thresh: %d\n",
> +                       ath10k_warn(ar, "failed to recalc ps wake threshold on vdev %i: %d\n",
>                                     arvif->vdev_id, ret);
> -                       goto err_peer_delete;
> +                       return ret;

Oops. This is wrong. I should keep the goto.

There are also some Rx performance issues related to excessive PS-Poll usage.

I'll re-spin later.


Micha?
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 950322d..969d187 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1048,6 +1048,31 @@  static void ath10k_control_ibss(struct ath10k_vif *arvif,
 			    arvif->vdev_id, ret);
 }
 
+static int ath10k_mac_vif_recalc_ps_wake_threshold(struct ath10k_vif *arvif)
+{
+	struct ath10k *ar = arvif->ar;
+	u32 param;
+	u32 value;
+	int ret;
+
+	lockdep_assert_held(&arvif->ar->conf_mutex);
+
+	if (arvif->u.sta.uapsd)
+		value = WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER;
+	else
+		value = WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS;
+
+	param = WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD;
+	ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, param, value);
+	if (ret) {
+		ath10k_warn(ar, "failed to submit ps wake threshold %u on vdev %i: %d\n",
+			    value, arvif->vdev_id, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 /*
  * Review this when mac80211 gains per-interface powersave support.
  */
@@ -3036,14 +3061,11 @@  static int ath10k_add_interface(struct ieee80211_hw *hw,
 			goto err_peer_delete;
 		}
 
-		param = WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD;
-		value = WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS;
-		ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
-						  param, value);
+		ret = ath10k_mac_vif_recalc_ps_wake_threshold(arvif);
 		if (ret) {
-			ath10k_warn(ar, "failed to set vdev %i TX wake thresh: %d\n",
+			ath10k_warn(ar, "failed to recalc ps wake threshold on vdev %i: %d\n",
 				    arvif->vdev_id, ret);
-			goto err_peer_delete;
+			return ret;
 		}
 
 		param = WMI_STA_PS_PARAM_PSPOLL_COUNT;
@@ -3818,6 +3840,13 @@  static int ath10k_conf_tx_uapsd(struct ath10k *ar, struct ieee80211_vif *vif,
 	if (ret)
 		ath10k_warn(ar, "failed to set rx wake param: %d\n", ret);
 
+	ret = ath10k_mac_vif_recalc_ps_wake_threshold(arvif);
+	if (ret) {
+		ath10k_warn(ar, "failed to recalc ps wake threshold on vdev %i: %d\n",
+			    arvif->vdev_id, ret);
+		return ret;
+	}
+
 exit:
 	return ret;
 }