diff mbox

[2/3] ath10k: Update chirp value in pulse event

Message ID 1423775825-19498-2-git-send-email-poh@qca.qualcomm.com (mailing list archive)
State Not Applicable
Delegated to: Kalle Valo
Headers show

Commit Message

Peter Oh Feb. 12, 2015, 9:17 p.m. UTC
Firmware reports chirp status in phy error event if it's detected
and the chirp status is valuable to distinguish radar types.
So save it to use for DFS parttern detector.

Signed-off-by: Peter Oh <poh@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/wmi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox

Patch

diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 81561e4..0c06361 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -2550,7 +2550,7 @@  static void ath10k_dfs_radar_report(struct ath10k *ar,
 	pe.freq = ar->hw->conf.chandef.chan->center_freq;
 	pe.width = width;
 	pe.rssi = rssi;
-
+	pe.chirp = (MS(reg0, RADAR_REPORT_REG0_PULSE_IS_CHIRP) != 0);
 	ath10k_dbg(ar, ATH10K_DBG_REGULATORY,
 		   "dfs add pulse freq: %d, width: %d, rssi %d, tsf: %llX\n",
 		   pe.freq, pe.width, pe.rssi, pe.ts);