@@ -241,11 +241,14 @@ iwl_fw_error_next_data(struct iwl_fw_error_dump_data *data)
* driver should set to indicate that the trigger was initiated by the
* user.
* @FW_DBG_TRIGGER_FW_ASSERT: trigger log collection when the firmware asserts
+ * @FW_DBG_TRIGGER_MISSED_BEACONS: trigger log collection when beacons are
+ * missed.
*/
enum iwl_fw_dbg_trigger {
FW_DBG_TRIGGER_INVALID = 0,
FW_DBG_TRIGGER_USER,
FW_DBG_TRIGGER_FW_ASSERT,
+ FW_DBG_TRIGGER_MISSED_BEACONS,
/* must be last */
FW_DBG_TRIGGER_MAX,
@@ -523,6 +523,24 @@ struct iwl_fw_dbg_trigger_tlv {
#define FW_DBG_INVALID 0xff
/**
+ * struct iwl_fw_dbg_trigger_missed_bcon - configures trigger for missed beacons
+ * @stop_consec_missed_bcon: stop recording if threshold is crossed.
+ * @stop_consec_missed_bcon_since_rx: stop recording if threshold is crossed.
+ * @start_consec_missed_bcon: start recording if threshold is crossed.
+ * @start_consec_missed_bcon_since_rx: start recording if threshold is crossed.
+ * @reserved1: reserved
+ * @reserved2: reserved
+ */
+struct iwl_fw_dbg_trigger_missed_bcon {
+ __le32 stop_consec_missed_bcon;
+ __le32 stop_consec_missed_bcon_since_rx;
+ __le32 reserved2[2];
+ __le32 start_consec_missed_bcon;
+ __le32 start_consec_missed_bcon_since_rx;
+ __le32 reserved1[2];
+} __packed;
+
+/**
* struct iwl_fw_dbg_conf_tlv - a TLV that describes a debug configuration.
* @id: conf id
* @usniffer: should the uSniffer image be used
@@ -1375,10 +1375,18 @@ static void iwl_mvm_beacon_loss_iterator(void *_data, u8 *mac,
{
struct iwl_missed_beacons_notif *missed_beacons = _data;
struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+ struct iwl_mvm *mvm = mvmvif->mvm;
+ struct iwl_fw_dbg_trigger_missed_bcon *bcon_trig;
+ struct iwl_fw_dbg_trigger_tlv *trigger;
+ u32 stop_trig_missed_bcon, stop_trig_missed_bcon_since_rx;
+ u32 rx_missed_bcon, rx_missed_bcon_since_rx;
if (mvmvif->id != (u16)le32_to_cpu(missed_beacons->mac_id))
return;
+ rx_missed_bcon = le32_to_cpu(missed_beacons->consec_missed_beacons);
+ rx_missed_bcon_since_rx =
+ le32_to_cpu(missed_beacons->consec_missed_beacons_since_last_rx);
/*
* TODO: the threshold should be adjusted based on latency conditions,
* and/or in case of a CS flow on one of the other AP vifs.
@@ -1386,6 +1394,26 @@ static void iwl_mvm_beacon_loss_iterator(void *_data, u8 *mac,
if (le32_to_cpu(missed_beacons->consec_missed_beacons_since_last_rx) >
IWL_MVM_MISSED_BEACONS_THRESHOLD)
ieee80211_beacon_loss(vif);
+
+ if (!iwl_fw_dbg_trigger_enabled(mvm->fw,
+ FW_DBG_TRIGGER_MISSED_BEACONS))
+ return;
+
+ trigger = iwl_fw_dbg_get_trigger(mvm->fw,
+ FW_DBG_TRIGGER_MISSED_BEACONS);
+ bcon_trig = (void *)trigger->data;
+ stop_trig_missed_bcon = le32_to_cpu(bcon_trig->stop_consec_missed_bcon);
+ stop_trig_missed_bcon_since_rx =
+ le32_to_cpu(bcon_trig->stop_consec_missed_bcon_since_rx);
+
+ /* TODO: implement start trigger */
+
+ if (!iwl_fw_dbg_trigger_check_stop(mvm, vif, trigger))
+ return;
+
+ if (rx_missed_bcon_since_rx >= stop_trig_missed_bcon_since_rx ||
+ rx_missed_bcon >= stop_trig_missed_bcon)
+ iwl_mvm_fw_dbg_collect_trig(mvm, trigger, NULL, 0);
}
int iwl_mvm_rx_missed_beacons_notif(struct iwl_mvm *mvm,
Missing beacons is a good indication that something is going wrong in the firmware. Add a trigger to be able to collect data when we start missing beacons with a configurable threshold. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> --- drivers/net/wireless/iwlwifi/iwl-fw-error-dump.h | 3 +++ drivers/net/wireless/iwlwifi/iwl-fw-file.h | 18 +++++++++++++++ drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c | 28 ++++++++++++++++++++++++ 3 files changed, 49 insertions(+)