diff mbox

[3/7] ath9k: Add register definitions for AIC

Message ID 1425976534-1194-4-git-send-email-sujith@msujith.org (mailing list archive)
State Changes Requested
Delegated to: Kalle Valo
Headers show

Commit Message

Sujith Manoharan March 10, 2015, 8:35 a.m. UTC 
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>

Various registers to control and check AIC
status.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_aic.c |   1 +
 drivers/net/wireless/ath/ath9k/ar9003_phy.h |  25 -----
 drivers/net/wireless/ath/ath9k/reg_aic.h    | 168 ++++++++++++++++++++++++++++
 3 files changed, 169 insertions(+), 25 deletions(-)
 create mode 100644 drivers/net/wireless/ath/ath9k/reg_aic.h
diff mbox

Patch

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_aic.c b/drivers/net/wireless/ath/ath9k/ar9003_aic.c
index 0cd159d..cc1e97b 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_aic.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_aic.c
@@ -18,6 +18,7 @@ 
 #include "hw-ops.h"
 #include "ar9003_mci.h"
 #include "ar9003_aic.h"
+#include "reg_aic.h"
 
 static bool ar9003_hw_is_aic_enabled(struct ath_hw *ah)
 {
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
index c311b2b..fc595b9 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
@@ -640,16 +640,6 @@ 
 #define AR_PHY_BB_THERM_ADC_4_LATEST_VOLT_VALUE		0x0000ff00
 #define AR_PHY_BB_THERM_ADC_4_LATEST_VOLT_VALUE_S	8
 
-/* AIC Registers */
-#define AR_PHY_AIC_CTRL_0_B0	(AR_SM_BASE + 0x4b0)
-#define AR_PHY_AIC_CTRL_1_B0	(AR_SM_BASE + 0x4b4)
-#define AR_PHY_AIC_CTRL_2_B0	(AR_SM_BASE + 0x4b8)
-#define AR_PHY_AIC_CTRL_3_B0	(AR_SM_BASE + 0x4bc)
-#define AR_PHY_AIC_STAT_0_B0	(AR_SM_BASE + 0x4c4))
-#define AR_PHY_AIC_STAT_1_B0	(AR_SM_BASE + 0x4c8))
-#define AR_PHY_AIC_CTRL_4_B0	(AR_SM_BASE + 0x4c0)
-#define AR_PHY_AIC_STAT_2_B0	(AR_SM_BASE + 0x4cc)
-
 #define AR_PHY_65NM_CH0_TXRF3       0x16048
 #define AR_PHY_65NM_CH0_TXRF3_CAPDIV2G		0x0000001e
 #define AR_PHY_65NM_CH0_TXRF3_CAPDIV2G_S	1
@@ -989,21 +979,6 @@ 
 #define AR_PHY_TX_IQCAL_STATUS_B1   (AR_SM1_BASE + 0x48c)
 #define AR_PHY_TX_IQCAL_CORR_COEFF_B1(_i)    (AR_SM1_BASE + 0x450 + ((_i) << 2))
 
-/* SM 1 AIC Registers */
-
-#define AR_PHY_AIC_CTRL_0_B1	(AR_SM1_BASE + 0x4b0)
-#define AR_PHY_AIC_CTRL_1_B1	(AR_SM1_BASE + 0x4b4)
-#define AR_PHY_AIC_CTRL_2_B1	(AR_SM1_BASE + 0x4b8)
-#define AR_PHY_AIC_STAT_0_B1	(AR_SM1_BASE + (AR_SREV_9462_10(ah) ? \
-					0x4c0 : 0x4c4))
-#define AR_PHY_AIC_STAT_1_B1	(AR_SM1_BASE + (AR_SREV_9462_10(ah) ? \
-					0x4c4 : 0x4c8))
-#define AR_PHY_AIC_CTRL_4_B1	(AR_SM1_BASE + 0x4c0)
-#define AR_PHY_AIC_STAT_2_B1	(AR_SM1_BASE + 0x4cc)
-
-#define AR_PHY_AIC_SRAM_ADDR_B1	(AR_SM1_BASE + 0x5f0)
-#define AR_PHY_AIC_SRAM_DATA_B1	(AR_SM1_BASE + 0x5f4)
-
 #define AR_PHY_RTT_TABLE_SW_INTF_B(i)	(0x384 + ((i) ? \
 					AR_SM1_BASE : AR_SM_BASE))
 #define AR_PHY_RTT_TABLE_SW_INTF_1_B(i)	(0x388 + ((i) ? \
diff --git a/drivers/net/wireless/ath/ath9k/reg_aic.h b/drivers/net/wireless/ath/ath9k/reg_aic.h
new file mode 100644
index 0000000..955147a
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/reg_aic.h
@@ -0,0 +1,168 @@ 
+/*
+ * Copyright (c) 2015 Qualcomm Atheros Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef REG_AIC_H
+#define REG_AIC_H
+
+#define AR_SM_BASE                              0xa200
+#define AR_SM1_BASE                             0xb200
+#define AR_AGC_BASE                             0x9e00
+
+#define AR_PHY_AIC_CTRL_0_B0                    (AR_SM_BASE + 0x4b0)
+#define AR_PHY_AIC_CTRL_1_B0                    (AR_SM_BASE + 0x4b4)
+#define AR_PHY_AIC_CTRL_2_B0                    (AR_SM_BASE + 0x4b8)
+#define AR_PHY_AIC_CTRL_3_B0                    (AR_SM_BASE + 0x4bc)
+#define AR_PHY_AIC_CTRL_4_B0                    (AR_SM_BASE + 0x4c0)
+
+#define AR_PHY_AIC_STAT_0_B0                    (AR_SM_BASE + 0x4c4)
+#define AR_PHY_AIC_STAT_1_B0                    (AR_SM_BASE + 0x4c8)
+#define AR_PHY_AIC_STAT_2_B0                    (AR_SM_BASE + 0x4cc)
+
+#define AR_PHY_AIC_CTRL_0_B1                    (AR_SM1_BASE + 0x4b0)
+#define AR_PHY_AIC_CTRL_1_B1                    (AR_SM1_BASE + 0x4b4)
+#define AR_PHY_AIC_CTRL_4_B1                    (AR_SM1_BASE + 0x4c0)
+
+#define AR_PHY_AIC_STAT_0_B1                    (AR_SM1_BASE + 0x4c4)
+#define AR_PHY_AIC_STAT_1_B1                    (AR_SM1_BASE + 0x4c8)
+#define AR_PHY_AIC_STAT_2_B1                    (AR_SM1_BASE + 0x4cc)
+
+#define AR_PHY_AIC_SRAM_ADDR_B0                 (AR_SM_BASE + 0x5f0)
+#define AR_PHY_AIC_SRAM_DATA_B0                 (AR_SM_BASE + 0x5f4)
+
+#define AR_PHY_AIC_SRAM_ADDR_B1                 (AR_SM1_BASE + 0x5f0)
+#define AR_PHY_AIC_SRAM_DATA_B1                 (AR_SM1_BASE + 0x5f4)
+
+#define AR_PHY_BT_COEX_4                        (AR_AGC_BASE + 0x60)
+#define AR_PHY_BT_COEX_5                        (AR_AGC_BASE + 0x64)
+
+/* AIC fields */
+#define AR_PHY_AIC_MON_ENABLE                   0x80000000
+#define AR_PHY_AIC_MON_ENABLE_S                 31
+#define AR_PHY_AIC_CAL_MAX_HOP_COUNT            0x7F000000
+#define AR_PHY_AIC_CAL_MAX_HOP_COUNT_S          24
+#define AR_PHY_AIC_CAL_MIN_VALID_COUNT          0x00FE0000
+#define AR_PHY_AIC_CAL_MIN_VALID_COUNT_S        17
+#define AR_PHY_AIC_F_WLAN                       0x0001FC00
+#define AR_PHY_AIC_F_WLAN_S                     10
+#define AR_PHY_AIC_CAL_CH_VALID_RESET           0x00000200
+#define AR_PHY_AIC_CAL_CH_VALID_RESET_S         9
+#define AR_PHY_AIC_CAL_ENABLE                   0x00000100
+#define AR_PHY_AIC_CAL_ENABLE_S                 8
+#define AR_PHY_AIC_BTTX_PWR_THR                 0x000000FE
+#define AR_PHY_AIC_BTTX_PWR_THR_S               1
+#define AR_PHY_AIC_ENABLE                       0x00000001
+#define AR_PHY_AIC_ENABLE_S                     0
+#define AR_PHY_AIC_CAL_BT_REF_DELAY             0x00F00000
+#define AR_PHY_AIC_CAL_BT_REF_DELAY_S           20
+#define AR_PHY_AIC_BT_IDLE_CFG                  0x00080000
+#define AR_PHY_AIC_BT_IDLE_CFG_S                19
+#define AR_PHY_AIC_STDBY_COND                   0x00060000
+#define AR_PHY_AIC_STDBY_COND_S                 17
+#define AR_PHY_AIC_STDBY_ROT_ATT_DB             0x0001F800
+#define AR_PHY_AIC_STDBY_ROT_ATT_DB_S           11
+#define AR_PHY_AIC_STDBY_COM_ATT_DB             0x00000700
+#define AR_PHY_AIC_STDBY_COM_ATT_DB_S           8
+#define AR_PHY_AIC_RSSI_MAX                     0x000000F0
+#define AR_PHY_AIC_RSSI_MAX_S                   4
+#define AR_PHY_AIC_RSSI_MIN                     0x0000000F
+#define AR_PHY_AIC_RSSI_MIN_S                   0
+#define AR_PHY_AIC_RADIO_DELAY                  0x7F000000
+#define AR_PHY_AIC_RADIO_DELAY_S                24
+#define AR_PHY_AIC_CAL_STEP_SIZE_CORR           0x00F00000
+#define AR_PHY_AIC_CAL_STEP_SIZE_CORR_S         20
+#define AR_PHY_AIC_CAL_ROT_IDX_CORR             0x000F8000
+#define AR_PHY_AIC_CAL_ROT_IDX_CORR_S           15
+#define AR_PHY_AIC_CAL_CONV_CHECK_FACTOR        0x00006000
+#define AR_PHY_AIC_CAL_CONV_CHECK_FACTOR_S      13
+#define AR_PHY_AIC_ROT_IDX_COUNT_MAX            0x00001C00
+#define AR_PHY_AIC_ROT_IDX_COUNT_MAX_S          10
+#define AR_PHY_AIC_CAL_SYNTH_TOGGLE             0x00000200
+#define AR_PHY_AIC_CAL_SYNTH_TOGGLE_S           9
+#define AR_PHY_AIC_CAL_SYNTH_AFTER_BTRX         0x00000100
+#define AR_PHY_AIC_CAL_SYNTH_AFTER_BTRX_S       8
+#define AR_PHY_AIC_CAL_SYNTH_SETTLING           0x000000FF
+#define AR_PHY_AIC_CAL_SYNTH_SETTLING_S         0
+#define AR_PHY_AIC_MON_MAX_HOP_COUNT            0x07F00000
+#define AR_PHY_AIC_MON_MAX_HOP_COUNT_S          20
+#define AR_PHY_AIC_MON_MIN_STALE_COUNT          0x000FE000
+#define AR_PHY_AIC_MON_MIN_STALE_COUNT_S        13
+#define AR_PHY_AIC_MON_PWR_EST_LONG             0x00001000
+#define AR_PHY_AIC_MON_PWR_EST_LONG_S           12
+#define AR_PHY_AIC_MON_PD_TALLY_SCALING         0x00000C00
+#define AR_PHY_AIC_MON_PD_TALLY_SCALING_S       10
+#define AR_PHY_AIC_MON_PERF_THR                 0x000003E0
+#define AR_PHY_AIC_MON_PERF_THR_S               5
+#define AR_PHY_AIC_CAL_TARGET_MAG_SETTING       0x00000018
+#define AR_PHY_AIC_CAL_TARGET_MAG_SETTING_S     3
+#define AR_PHY_AIC_CAL_PERF_CHECK_FACTOR        0x00000006
+#define AR_PHY_AIC_CAL_PERF_CHECK_FACTOR_S      1
+#define AR_PHY_AIC_CAL_PWR_EST_LONG             0x00000001
+#define AR_PHY_AIC_CAL_PWR_EST_LONG_S           0
+#define AR_PHY_AIC_MON_DONE                     0x80000000
+#define AR_PHY_AIC_MON_DONE_S                   31
+#define AR_PHY_AIC_MON_ACTIVE                   0x40000000
+#define AR_PHY_AIC_MON_ACTIVE_S                 30
+#define AR_PHY_AIC_MEAS_COUNT                   0x3F000000
+#define AR_PHY_AIC_MEAS_COUNT_S                 24
+#define AR_PHY_AIC_CAL_ANT_ISO_EST              0x00FC0000
+#define AR_PHY_AIC_CAL_ANT_ISO_EST_S            18
+#define AR_PHY_AIC_CAL_HOP_COUNT                0x0003F800
+#define AR_PHY_AIC_CAL_HOP_COUNT_S              11
+#define AR_PHY_AIC_CAL_VALID_COUNT              0x000007F0
+#define AR_PHY_AIC_CAL_VALID_COUNT_S            4
+#define AR_PHY_AIC_CAL_BT_TOO_WEAK_ERR          0x00000008
+#define AR_PHY_AIC_CAL_BT_TOO_WEAK_ERR_S        3
+#define AR_PHY_AIC_CAL_BT_TOO_STRONG_ERR        0x00000004
+#define AR_PHY_AIC_CAL_BT_TOO_STRONG_ERR_S      2
+#define AR_PHY_AIC_CAL_DONE                     0x00000002
+#define AR_PHY_AIC_CAL_DONE_S                   1
+#define AR_PHY_AIC_CAL_ACTIVE                   0x00000001
+#define AR_PHY_AIC_CAL_ACTIVE_S                 0
+
+#define AR_PHY_AIC_MEAS_MAG_MIN                 0xFFC00000
+#define AR_PHY_AIC_MEAS_MAG_MIN_S               22
+#define AR_PHY_AIC_MON_STALE_COUNT              0x003F8000
+#define AR_PHY_AIC_MON_STALE_COUNT_S            15
+#define AR_PHY_AIC_MON_HOP_COUNT                0x00007F00
+#define AR_PHY_AIC_MON_HOP_COUNT_S              8
+#define AR_PHY_AIC_CAL_AIC_SM                   0x000000F8
+#define AR_PHY_AIC_CAL_AIC_SM_S                 3
+#define AR_PHY_AIC_SM                           0x00000007
+#define AR_PHY_AIC_SM_S                         0
+#define AR_PHY_AIC_SRAM_VALID                   0x00000001
+#define AR_PHY_AIC_SRAM_VALID_S                 0
+#define AR_PHY_AIC_SRAM_ROT_QUAD_ATT_DB         0x0000007E
+#define AR_PHY_AIC_SRAM_ROT_QUAD_ATT_DB_S       1
+#define AR_PHY_AIC_SRAM_VGA_QUAD_SIGN           0x00000080
+#define AR_PHY_AIC_SRAM_VGA_QUAD_SIGN_S         7
+#define AR_PHY_AIC_SRAM_ROT_DIR_ATT_DB          0x00003F00
+#define AR_PHY_AIC_SRAM_ROT_DIR_ATT_DB_S        8
+#define AR_PHY_AIC_SRAM_VGA_DIR_SIGN            0x00004000
+#define AR_PHY_AIC_SRAM_VGA_DIR_SIGN_S          14
+#define AR_PHY_AIC_SRAM_COM_ATT_6DB             0x00038000
+#define AR_PHY_AIC_SRAM_COM_ATT_6DB_S           15
+#define AR_PHY_AIC_CAL_ROT_ATT_DB_EST_ISO       0x0000E000
+#define AR_PHY_AIC_CAL_ROT_ATT_DB_EST_ISO_S     13
+#define AR_PHY_AIC_CAL_COM_ATT_DB_EST_ISO       0x00001E00
+#define AR_PHY_AIC_CAL_COM_ATT_DB_EST_ISO_S     9
+#define AR_PHY_AIC_CAL_ISO_EST_INIT_SETTING     0x000001F8
+#define AR_PHY_AIC_CAL_ISO_EST_INIT_SETTING_S   3
+#define AR_PHY_AIC_CAL_COM_ATT_DB_BACKOFF       0x00000006
+#define AR_PHY_AIC_CAL_COM_ATT_DB_BACKOFF_S     1
+#define AR_PHY_AIC_CAL_COM_ATT_DB_FIXED         0x00000001
+#define AR_PHY_AIC_CAL_COM_ATT_DB_FIXED_S       0
+
+#endif /* REG_AIC_H */