diff mbox

[4/7] ath9k: Handle MCI_STATE_AIC_CAL_SINGLE

Message ID 1425976534-1194-5-git-send-email-sujith@msujith.org (mailing list archive)
State Changes Requested
Delegated to: Kalle Valo
Headers show

Commit Message

Sujith Manoharan March 10, 2015, 8:35 a.m. UTC
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>

This patch adds routines to handle the MCI
message AIC_CAL_SINGLE, starting the required
HW calibration.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_aic.c | 169 ++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath9k/ar9003_aic.h |   9 ++
 drivers/net/wireless/ath/ath9k/ar9003_mci.c |   4 +
 drivers/net/wireless/ath/ath9k/btcoex.h     |   1 +
 4 files changed, 183 insertions(+)
diff mbox

Patch

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_aic.c b/drivers/net/wireless/ath/ath9k/ar9003_aic.c
index cc1e97b..c2cfac3 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_aic.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_aic.c
@@ -30,6 +30,175 @@  static bool ar9003_hw_is_aic_enabled(struct ath_hw *ah)
 	return true;
 }
 
+static void ar9003_aic_gain_table(struct ath_hw *ah)
+{
+	u32 aic_atten_word[19], i;
+
+	/* Config LNA gain difference */
+	REG_WRITE(ah, AR_PHY_BT_COEX_4, 0x2c200a00);
+	REG_WRITE(ah, AR_PHY_BT_COEX_5, 0x5c4e4438);
+
+	/* Program gain table */
+	aic_atten_word[0] = (0x1 & 0xf) << 14 | (0x1f & 0x1f) << 9 | (0x0 & 0xf) << 5 |
+		(0x1f & 0x1f); /* -01 dB: 4'd1, 5'd31,  00 dB: 4'd0, 5'd31 */
+	aic_atten_word[1] = (0x3 & 0xf) << 14 | (0x1f & 0x1f) << 9 | (0x2 & 0xf) << 5 |
+		(0x1f & 0x1f); /* -03 dB: 4'd3, 5'd31, -02 dB: 4'd2, 5'd31 */
+	aic_atten_word[2] = (0x5 & 0xf) << 14 | (0x1f & 0x1f) << 9 | (0x4 & 0xf) << 5 |
+		(0x1f & 0x1f); /* -05 dB: 4'd5, 5'd31, -04 dB: 4'd4, 5'd31 */
+	aic_atten_word[3] = (0x1 & 0xf) << 14 | (0x1e & 0x1f) << 9 | (0x0 & 0xf) << 5 |
+		(0x1e & 0x1f); /* -07 dB: 4'd1, 5'd30, -06 dB: 4'd0, 5'd30 */
+	aic_atten_word[4] = (0x3 & 0xf) << 14 | (0x1e & 0x1f) << 9 | (0x2 & 0xf) << 5 |
+		(0x1e & 0x1f); /* -09 dB: 4'd3, 5'd30, -08 dB: 4'd2, 5'd30 */
+	aic_atten_word[5] = (0x5 & 0xf) << 14 | (0x1e & 0x1f) << 9 | (0x4 & 0xf) << 5 |
+		(0x1e & 0x1f); /* -11 dB: 4'd5, 5'd30, -10 dB: 4'd4, 5'd30 */
+	aic_atten_word[6] = (0x1 & 0xf) << 14 | (0xf & 0x1f) << 9  | (0x0 & 0xf) << 5 |
+		(0xf & 0x1f);  /* -13 dB: 4'd1, 5'd15, -12 dB: 4'd0, 5'd15 */
+	aic_atten_word[7] = (0x3 & 0xf) << 14 | (0xf & 0x1f) << 9  | (0x2 & 0xf) << 5 |
+		(0xf & 0x1f);  /* -15 dB: 4'd3, 5'd15, -14 dB: 4'd2, 5'd15 */
+	aic_atten_word[8] = (0x5 & 0xf) << 14 | (0xf & 0x1f) << 9  | (0x4 & 0xf) << 5 |
+		(0xf & 0x1f);  /* -17 dB: 4'd5, 5'd15, -16 dB: 4'd4, 5'd15 */
+	aic_atten_word[9] = (0x1 & 0xf) << 14 | (0x7 & 0x1f) << 9  | (0x0 & 0xf) << 5 |
+		(0x7 & 0x1f);  /* -19 dB: 4'd1, 5'd07, -18 dB: 4'd0, 5'd07 */
+	aic_atten_word[10] = (0x3 & 0xf) << 14 | (0x7 & 0x1f) << 9  | (0x2 & 0xf) << 5 |
+		(0x7 & 0x1f);  /* -21 dB: 4'd3, 5'd07, -20 dB: 4'd2, 5'd07 */
+	aic_atten_word[11] = (0x5 & 0xf) << 14 | (0x7 & 0x1f) << 9  | (0x4 & 0xf) << 5 |
+		(0x7 & 0x1f);  /* -23 dB: 4'd5, 5'd07, -22 dB: 4'd4, 5'd07 */
+	aic_atten_word[12] = (0x7 & 0xf) << 14 | (0x7 & 0x1f) << 9  | (0x6 & 0xf) << 5 |
+		(0x7 & 0x1f);  /* -25 dB: 4'd7, 5'd07, -24 dB: 4'd6, 5'd07 */
+	aic_atten_word[13] = (0x3 & 0xf) << 14 | (0x3 & 0x1f) << 9  | (0x2 & 0xf) << 5 |
+		(0x3 & 0x1f);  /* -27 dB: 4'd3, 5'd03, -26 dB: 4'd2, 5'd03 */
+	aic_atten_word[14] = (0x5 & 0xf) << 14 | (0x3 & 0x1f) << 9  | (0x4 & 0xf) << 5 |
+		(0x3 & 0x1f);  /* -29 dB: 4'd5, 5'd03, -28 dB: 4'd4, 5'd03 */
+	aic_atten_word[15] = (0x1 & 0xf) << 14 | (0x1 & 0x1f) << 9  | (0x0 & 0xf) << 5 |
+		(0x1 & 0x1f);  /* -31 dB: 4'd1, 5'd01, -30 dB: 4'd0, 5'd01 */
+	aic_atten_word[16] = (0x3 & 0xf) << 14 | (0x1 & 0x1f) << 9  | (0x2 & 0xf) << 5 |
+		(0x1 & 0x1f);  /* -33 dB: 4'd3, 5'd01, -32 dB: 4'd2, 5'd01 */
+	aic_atten_word[17] = (0x5 & 0xf) << 14 | (0x1 & 0x1f) << 9  | (0x4 & 0xf) << 5 |
+		(0x1 & 0x1f);  /* -35 dB: 4'd5, 5'd01, -34 dB: 4'd4, 5'd01 */
+	aic_atten_word[18] = (0x7 & 0xf) << 14 | (0x1 & 0x1f) << 9  | (0x6 & 0xf) << 5 |
+		(0x1 & 0x1f);  /* -37 dB: 4'd7, 5'd01, -36 dB: 4'd6, 5'd01 */
+
+	/* Write to Gain table with auto increment enabled. */
+	REG_WRITE(ah, (AR_PHY_AIC_SRAM_ADDR_B0 + 0x3000),
+		  (ATH_AIC_SRAM_AUTO_INCREMENT |
+		   ATH_AIC_SRAM_GAIN_TABLE_OFFSET));
+
+	for (i = 0; i < 19; i++) {
+		REG_WRITE(ah, (AR_PHY_AIC_SRAM_DATA_B0 + 0x3000),
+			  aic_atten_word[i]);
+	}
+}
+
+static void ar9003_aic_cal_start(struct ath_hw *ah, u8 min_valid_count)
+{
+	struct ath9k_hw_aic *aic = &ah->btcoex_hw.aic;
+	int i;
+
+	/* Write to Gain table with auto increment enabled. */
+	REG_WRITE(ah, (AR_PHY_AIC_SRAM_ADDR_B0 + 0x3000),
+		  (ATH_AIC_SRAM_AUTO_INCREMENT |
+		   ATH_AIC_SRAM_CAL_OFFSET));
+
+	for (i = 0; i < ATH_AIC_MAX_BT_CHANNEL; i++) {
+		REG_WRITE(ah, (AR_PHY_AIC_SRAM_DATA_B0 + 0x3000), 0);
+		aic->aic_sram[i] = 0;
+	}
+
+	REG_WRITE(ah, AR_PHY_AIC_CTRL_0_B0,
+		  (SM(0, AR_PHY_AIC_MON_ENABLE) |
+		   SM(127, AR_PHY_AIC_CAL_MAX_HOP_COUNT) |
+		   SM(min_valid_count, AR_PHY_AIC_CAL_MIN_VALID_COUNT) |
+		   SM(37, AR_PHY_AIC_F_WLAN) |
+		   SM(1, AR_PHY_AIC_CAL_CH_VALID_RESET) |
+		   SM(0, AR_PHY_AIC_CAL_ENABLE) |
+		   SM(0x40, AR_PHY_AIC_BTTX_PWR_THR) |
+		   SM(0, AR_PHY_AIC_ENABLE)));
+
+	REG_WRITE(ah, AR_PHY_AIC_CTRL_0_B1,
+		  (SM(0, AR_PHY_AIC_MON_ENABLE) |
+		   SM(1, AR_PHY_AIC_CAL_CH_VALID_RESET) |
+		   SM(0, AR_PHY_AIC_CAL_ENABLE) |
+		   SM(0x40, AR_PHY_AIC_BTTX_PWR_THR) |
+		   SM(0, AR_PHY_AIC_ENABLE)));
+
+	REG_WRITE(ah, AR_PHY_AIC_CTRL_1_B0,
+		  (SM(8, AR_PHY_AIC_CAL_BT_REF_DELAY) |
+		   SM(0, AR_PHY_AIC_BT_IDLE_CFG) |
+		   SM(1, AR_PHY_AIC_STDBY_COND) |
+		   SM(37, AR_PHY_AIC_STDBY_ROT_ATT_DB) |
+		   SM(5, AR_PHY_AIC_STDBY_COM_ATT_DB) |
+		   SM(15, AR_PHY_AIC_RSSI_MAX) |
+		   SM(0, AR_PHY_AIC_RSSI_MIN)));
+
+	REG_WRITE(ah, AR_PHY_AIC_CTRL_1_B1,
+		  (SM(15, AR_PHY_AIC_RSSI_MAX) |
+		   SM(0, AR_PHY_AIC_RSSI_MIN)));
+
+	REG_WRITE(ah, AR_PHY_AIC_CTRL_2_B0,
+		  (SM(44, AR_PHY_AIC_RADIO_DELAY) |
+		   SM(8, AR_PHY_AIC_CAL_STEP_SIZE_CORR) |
+		   SM(12, AR_PHY_AIC_CAL_ROT_IDX_CORR) |
+		   SM(2, AR_PHY_AIC_CAL_CONV_CHECK_FACTOR) |
+		   SM(5, AR_PHY_AIC_ROT_IDX_COUNT_MAX) |
+		   SM(0, AR_PHY_AIC_CAL_SYNTH_TOGGLE) |
+		   SM(0, AR_PHY_AIC_CAL_SYNTH_AFTER_BTRX) |
+		   SM(200, AR_PHY_AIC_CAL_SYNTH_SETTLING)));
+
+	REG_WRITE(ah, AR_PHY_AIC_CTRL_3_B0,
+		  (SM(2, AR_PHY_AIC_MON_MAX_HOP_COUNT) |
+		   SM(1, AR_PHY_AIC_MON_MIN_STALE_COUNT) |
+		   SM(1, AR_PHY_AIC_MON_PWR_EST_LONG) |
+		   SM(2, AR_PHY_AIC_MON_PD_TALLY_SCALING) |
+		   SM(10, AR_PHY_AIC_MON_PERF_THR) |
+		   SM(2, AR_PHY_AIC_CAL_TARGET_MAG_SETTING) |
+		   SM(1, AR_PHY_AIC_CAL_PERF_CHECK_FACTOR) |
+		   SM(1, AR_PHY_AIC_CAL_PWR_EST_LONG)));
+
+	REG_WRITE(ah, AR_PHY_AIC_CTRL_4_B0,
+		  (SM(2, AR_PHY_AIC_CAL_ROT_ATT_DB_EST_ISO) |
+		   SM(3, AR_PHY_AIC_CAL_COM_ATT_DB_EST_ISO) |
+		   SM(0, AR_PHY_AIC_CAL_ISO_EST_INIT_SETTING) |
+		   SM(2, AR_PHY_AIC_CAL_COM_ATT_DB_BACKOFF) |
+		   SM(1, AR_PHY_AIC_CAL_COM_ATT_DB_FIXED)));
+
+	REG_WRITE(ah, AR_PHY_AIC_CTRL_4_B1,
+		  (SM(2, AR_PHY_AIC_CAL_ROT_ATT_DB_EST_ISO) |
+		   SM(3, AR_PHY_AIC_CAL_COM_ATT_DB_EST_ISO) |
+		   SM(0, AR_PHY_AIC_CAL_ISO_EST_INIT_SETTING) |
+		   SM(2, AR_PHY_AIC_CAL_COM_ATT_DB_BACKOFF) |
+		   SM(1, AR_PHY_AIC_CAL_COM_ATT_DB_FIXED)));
+
+	ar9003_aic_gain_table(ah);
+
+	/* Need to enable AIC reference signal in BT modem. */
+	REG_WRITE(ah, ATH_AIC_BT_JUPITER_CTRL,
+		  (REG_READ(ah, ATH_AIC_BT_JUPITER_CTRL) |
+		   ATH_AIC_BT_AIC_ENABLE));
+
+	aic->aic_cal_start_time = REG_READ(ah, AR_TSF_L32);
+
+	/* Start calibration */
+	REG_CLR_BIT(ah, AR_PHY_AIC_CTRL_0_B1, AR_PHY_AIC_CAL_ENABLE);
+	REG_SET_BIT(ah, AR_PHY_AIC_CTRL_0_B1, AR_PHY_AIC_CAL_CH_VALID_RESET);
+	REG_SET_BIT(ah, AR_PHY_AIC_CTRL_0_B1, AR_PHY_AIC_CAL_ENABLE);
+
+	aic->aic_caled_chan = 0;
+	aic->aic_cal_state = AIC_CAL_STATE_STARTED;
+}
+
+u8 ar9003_aic_calibration_single(struct ath_hw *ah)
+{
+	struct ath9k_hw_mci *mci_hw = &ah->btcoex_hw.mci;
+	u8 cal_ret = 0;
+	int num_chan;
+
+	num_chan = MS(mci_hw->config, ATH_MCI_CONFIG_AIC_CAL_NUM_CHAN);
+
+	ar9003_aic_cal_start(ah, num_chan);
+
+	return cal_ret;
+}
+
 void ar9003_hw_attach_aic_ops(struct ath_hw *ah)
 {
 	struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_aic.h b/drivers/net/wireless/ath/ath9k/ar9003_aic.h
index d1adb49..9651bcd 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_aic.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_aic.h
@@ -31,6 +31,13 @@ 
 #define ATH_AIC_BT_JUPITER_CTRL         0x66820
 #define ATH_AIC_BT_AIC_ENABLE           0x02
 
+enum aic_cal_state {
+	AIC_CAL_STATE_IDLE = 0,
+	AIC_CAL_STATE_STARTED,
+	AIC_CAL_STATE_DONE,
+	AIC_CAL_STATE_ERROR
+};
+
 struct ath_aic_sram_info {
 	bool valid;
 	u8 rot_quad_att_db;
@@ -46,4 +53,6 @@  struct ath_aic_out_info {
 	struct ath_aic_sram_info sram;
 };
 
+u8 ar9003_aic_calibration_single(struct ath_hw *ah);
+
 #endif /* AR9003_AIC_H */
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
index bd169fa..20bb5b9 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
@@ -19,6 +19,7 @@ 
 #include "hw-ops.h"
 #include "ar9003_phy.h"
 #include "ar9003_mci.h"
+#include "ar9003_aic.h"
 
 static void ar9003_mci_reset_req_wakeup(struct ath_hw *ah)
 {
@@ -1362,6 +1363,9 @@  u32 ar9003_mci_state(struct ath_hw *ah, u32 state_type)
 		value = (!mci->unhalt_bt_gpm && mci->need_flush_btinfo) ? 1 : 0;
 		mci->need_flush_btinfo = false;
 		break;
+	case MCI_STATE_AIC_CAL_SINGLE:
+		value = ar9003_aic_calibration_single(ah);
+		break;
 	default:
 		break;
 	}
diff --git a/drivers/net/wireless/ath/ath9k/btcoex.h b/drivers/net/wireless/ath/ath9k/btcoex.h
index b3ed738..cd2f0a2 100644
--- a/drivers/net/wireless/ath/ath9k/btcoex.h
+++ b/drivers/net/wireless/ath/ath9k/btcoex.h
@@ -107,6 +107,7 @@  struct ath9k_hw_aic {
 struct ath_btcoex_hw {
 	enum ath_btcoex_scheme scheme;
 	struct ath9k_hw_mci mci;
+	struct ath9k_hw_aic aic;
 	bool enabled;
 	u8 wlanactive_gpio;
 	u8 btactive_gpio;