| Message ID | 1426763280-11284-2-git-send-email-arnagara@qti.qualcomm.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Delegated to: | Kalle Valo |
| Headers | show |
On Fri, Mar 20, 2015 at 10:28:06AM +0100, Jose Antonio Delgado Alfonso wrote: > Hi Ashok, > > Just a quick question, is it supported by all firmware versions? > Yes Jose. It is supported by all firmware versions. Thanks, Ashok > Thanks, > Jose A. Delgado > > On 19/03/15 12:08, Ashok Raj Nagarajan wrote: > > Now that ANI is enabled by default, allow user to disable or enable ANI feature > > from debugfs > > > > echo 0|1 > /sys/kernel/debug/ieee80211/phyX/ath10k/ani_enable > > > > Signed-off-by: Ashok Raj Nagarajan <arnagara@qti.qualcomm.com> > > --- > > v2: > > Updated commit log > > Lock ar->ani_enabled (Kalle Valo) > > remove reduntant debug message (Kalle Valo) > > > > drivers/net/wireless/ath/ath10k/core.h | 2 ++ > > drivers/net/wireless/ath/ath10k/debug.c | 58 +++++++++++++++++++++++++++++++++ > > drivers/net/wireless/ath/ath10k/mac.c | 2 ++ > > 3 files changed, 62 insertions(+) > > > > diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h > > index 7cba781..29e0a8b 100644 > > --- a/drivers/net/wireless/ath/ath10k/core.h > > +++ b/drivers/net/wireless/ath/ath10k/core.h > > @@ -510,6 +510,8 @@ struct ath10k { > > u32 ht_cap_info; > > u32 vht_cap_info; > > u32 num_rf_chains; > > + /* protected by conf_mutex */ > > + bool ani_enabled; > > > > DECLARE_BITMAP(fw_features, ATH10K_FW_FEATURE_COUNT); > > > > diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c > > index 301081d..481e1cc 100644 > > --- a/drivers/net/wireless/ath/ath10k/debug.c > > +++ b/drivers/net/wireless/ath/ath10k/debug.c > > @@ -1708,6 +1708,61 @@ static int ath10k_debug_cal_data_release(struct inode *inode, > > return 0; > > } > > > > +static ssize_t ath10k_write_ani_enable(struct file *file, > > + const char __user *user_buf, > > + size_t count, loff_t *ppos) > > +{ > > + struct ath10k *ar = file->private_data; > > + int ret; > > + u8 enable; > > + > > + if (kstrtou8_from_user(user_buf, count, 0, &enable)) > > + return -EINVAL; > > + > > + mutex_lock(&ar->conf_mutex); > > + > > + if (ar->ani_enabled == enable) { > > + ret = count; > > + goto exit; > > + } > > + > > + ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->ani_enable, > > + enable); > > + if (ret) { > > + ath10k_warn(ar, "ani_enable failed from debugfs: %d\n", ret); > > + goto exit; > > + } > > + ar->ani_enabled = enable; > > + > > + ret = count; > > + > > +exit: > > + mutex_unlock(&ar->conf_mutex); > > + > > + return ret; > > +} > > + > > +static ssize_t ath10k_read_ani_enable(struct file *file, char __user *user_buf, > > + size_t count, loff_t *ppos) > > +{ > > + struct ath10k *ar = file->private_data; > > + int len = 0; > > + char buf[32]; > > + > > + len = scnprintf(buf, sizeof(buf) - len, "%d\n", > > + ar->ani_enabled); > > + > > + return simple_read_from_buffer(user_buf, count, ppos, buf, len); > > +} > > + > > +static const struct file_operations fops_ani_enable = { > > + .read = ath10k_read_ani_enable, > > + .write = ath10k_write_ani_enable, > > + .open = simple_open, > > + .owner = THIS_MODULE, > > + .llseek = default_llseek, > > +}; > > + > > static const struct file_operations fops_cal_data = { > > .open = ath10k_debug_cal_data_open, > > .read = ath10k_debug_cal_data_read, > > @@ -2068,6 +2123,9 @@ int ath10k_debug_register(struct ath10k *ar) > > debugfs_create_file("cal_data", S_IRUSR, ar->debug.debugfs_phy, > > ar, &fops_cal_data); > > > > + debugfs_create_file("ani_enable", S_IRUSR | S_IWUSR, > > + ar->debug.debugfs_phy, ar, &fops_ani_enable); > > + > > debugfs_create_file("nf_cal_period", S_IRUSR | S_IWUSR, > > ar->debug.debugfs_phy, ar, &fops_nf_cal_period); > > > > diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c > > index 380d4b1..366c96f 100644 > > --- a/drivers/net/wireless/ath/ath10k/mac.c > > +++ b/drivers/net/wireless/ath/ath10k/mac.c > > @@ -2904,6 +2904,8 @@ static int ath10k_start(struct ieee80211_hw *hw) > > goto err_core_stop; > > } > > > > + ar->ani_enabled = true; > > + > > ar->num_started_vdevs = 0; > > ath10k_regd_update(ar); > > > > > -- > > ------------------------------------------------------------------------ > Jose Antonio Delgado Alfonso > Chief Technology Officer > > Calle Itálica 1, 1ª Planta > 41900 Camas (Sevilla) > > Email: jose.delgado@aoifes.com <mailto:jose.delgado@aoifes.com> > Tel: (+34) 955 228 533 > Tel2: (+34) 651 695 494 > Skype: jdelgadoalfonso > Web: www.aoifes.com <http://www.aoifes.com> > > ------------------------------------------------------------------------ > La información contenida en este correo es confidencial y puede ser > privilegiada. Está dirigida exclusivamente a los destinatarios indicados > arriba. Si Usted no es uno de los destinatarios, le queda totalmente > prohibido el uso, distribución, publicación o copia de la información > contenida en este correo. Es su propia responsabilidad escanear este > correo así como sus adjuntos para detectar virus. Si Usted ha recibido > este correo por error, por favor indíquenoslo lo más breve posible a > info@aoifes.com <mailto:info@aoifes.com> y borre este correo de su sistema. > ------------------------------------------------------------------------ > The information contained in this e-mail transmission is confidential > and may be privileged. It is intended only for the addressee(s) stated > above. If you are not an addressee, any use, dissemination, > distribution, publication or copying of the information contained in > this e-mail is strictly prohibited. It is your responsibility to scan > this email and any attachments for viruses. If you have received this > e-mail in error, please immediately notify us at info@aoifes.com > <mailto:info@aoifes.com> and delete the e-mail from your system. > ------------------------------------------------------------------------ -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index 7cba781..29e0a8b 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -510,6 +510,8 @@ struct ath10k { u32 ht_cap_info; u32 vht_cap_info; u32 num_rf_chains; + /* protected by conf_mutex */ + bool ani_enabled; DECLARE_BITMAP(fw_features, ATH10K_FW_FEATURE_COUNT); diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c index 301081d..481e1cc 100644 --- a/drivers/net/wireless/ath/ath10k/debug.c +++ b/drivers/net/wireless/ath/ath10k/debug.c @@ -1708,6 +1708,61 @@ static int ath10k_debug_cal_data_release(struct inode *inode, return 0; } +static ssize_t ath10k_write_ani_enable(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ath10k *ar = file->private_data; + int ret; + u8 enable; + + if (kstrtou8_from_user(user_buf, count, 0, &enable)) + return -EINVAL; + + mutex_lock(&ar->conf_mutex); + + if (ar->ani_enabled == enable) { + ret = count; + goto exit; + } + + ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->ani_enable, + enable); + if (ret) { + ath10k_warn(ar, "ani_enable failed from debugfs: %d\n", ret); + goto exit; + } + ar->ani_enabled = enable; + + ret = count; + +exit: + mutex_unlock(&ar->conf_mutex); + + return ret; +} + +static ssize_t ath10k_read_ani_enable(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ath10k *ar = file->private_data; + int len = 0; + char buf[32]; + + len = scnprintf(buf, sizeof(buf) - len, "%d\n", + ar->ani_enabled); + + return simple_read_from_buffer(user_buf, count, ppos, buf, len); +} + +static const struct file_operations fops_ani_enable = { + .read = ath10k_read_ani_enable, + .write = ath10k_write_ani_enable, + .open = simple_open, + .owner = THIS_MODULE, + .llseek = default_llseek, +}; + static const struct file_operations fops_cal_data = { .open = ath10k_debug_cal_data_open, .read = ath10k_debug_cal_data_read, @@ -2068,6 +2123,9 @@ int ath10k_debug_register(struct ath10k *ar) debugfs_create_file("cal_data", S_IRUSR, ar->debug.debugfs_phy, ar, &fops_cal_data); + debugfs_create_file("ani_enable", S_IRUSR | S_IWUSR, + ar->debug.debugfs_phy, ar, &fops_ani_enable); + debugfs_create_file("nf_cal_period", S_IRUSR | S_IWUSR, ar->debug.debugfs_phy, ar, &fops_nf_cal_period); diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 380d4b1..366c96f 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -2904,6 +2904,8 @@ static int ath10k_start(struct ieee80211_hw *hw) goto err_core_stop; } + ar->ani_enabled = true; + ar->num_started_vdevs = 0; ath10k_regd_update(ar);
Now that ANI is enabled by default, allow user to disable or enable ANI feature from debugfs echo 0|1 > /sys/kernel/debug/ieee80211/phyX/ath10k/ani_enable Signed-off-by: Ashok Raj Nagarajan <arnagara@qti.qualcomm.com> --- v2: Updated commit log Lock ar->ani_enabled (Kalle Valo) remove reduntant debug message (Kalle Valo) drivers/net/wireless/ath/ath10k/core.h | 2 ++ drivers/net/wireless/ath/ath10k/debug.c | 58 +++++++++++++++++++++++++++++++++ drivers/net/wireless/ath/ath10k/mac.c | 2 ++ 3 files changed, 62 insertions(+)