diff mbox

[09/18] ath9k: ath9k_hw_loadnf: use REG_RMW

Message ID 1426855138-6121-10-git-send-email-linux@rempel-privat.de (mailing list archive)
State Changes Requested
Delegated to: Kalle Valo
Headers show

Commit Message

Oleksij Rempel March 20, 2015, 12:38 p.m. UTC 
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
---
 drivers/net/wireless/ath/ath9k/calib.c | 19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)
diff mbox

Patch

diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c
index e200a6e..3e2e24e 100644
--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -238,7 +238,6 @@  int ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan)
 {
 	struct ath9k_nfcal_hist *h = NULL;
 	unsigned i, j;
-	int32_t val;
 	u8 chainmask = (ah->rxchainmask << 3) | ah->rxchainmask;
 	struct ath_common *common = ath9k_hw_common(ah);
 	s16 default_nf = ath9k_hw_get_default_nf(ah, chan);
@@ -246,6 +245,7 @@  int ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan)
 	if (ah->caldata)
 		h = ah->caldata->nfCalHist;
 
+	ENABLE_REG_RMW_BUFFER(ah);
 	for (i = 0; i < NUM_NF_READINGS; i++) {
 		if (chainmask & (1 << i)) {
 			s16 nfval;
@@ -258,10 +258,8 @@  int ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan)
 			else
 				nfval = default_nf;
 
-			val = REG_READ(ah, ah->nf_regs[i]);
-			val &= 0xFFFFFE00;
-			val |= (((u32) nfval << 1) & 0x1ff);
-			REG_WRITE(ah, ah->nf_regs[i], val);
+			REG_RMW(ah, ah->nf_regs[i],
+				(((u32) nfval << 1) & 0x1ff), 0x1ff);
 		}
 	}
 
@@ -274,6 +272,7 @@  int ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan)
 	REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL,
 		    AR_PHY_AGC_CONTROL_NO_UPDATE_NF);
 	REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF);
+	REG_RMW_BUFFER_FLUSH(ah);
 
 	/*
 	 * Wait for load to complete, should be fast, a few 10s of us.
@@ -309,19 +308,17 @@  int ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan)
 	 * by the median we just loaded.  This will be initial (and max) value
 	 * of next noise floor calibration the baseband does.
 	 */
-	ENABLE_REGWRITE_BUFFER(ah);
+	ENABLE_REG_RMW_BUFFER(ah);
 	for (i = 0; i < NUM_NF_READINGS; i++) {
 		if (chainmask & (1 << i)) {
 			if ((i >= AR5416_MAX_CHAINS) && !IS_CHAN_HT40(chan))
 				continue;
 
-			val = REG_READ(ah, ah->nf_regs[i]);
-			val &= 0xFFFFFE00;
-			val |= (((u32) (-50) << 1) & 0x1ff);
-			REG_WRITE(ah, ah->nf_regs[i], val);
+			REG_RMW(ah, ah->nf_regs[i],
+					(((u32) (-50) << 1) & 0x1ff), 0x1ff);
 		}
 	}
-	REGWRITE_BUFFER_FLUSH(ah);
+	REG_RMW_BUFFER_FLUSH(ah);
 
 	return 0;
 }