@@ -121,6 +121,26 @@ void ath9k_hw_write_array(struct ath_hw *ah, const struct ar5416IniArray *array,
REGWRITE_BUFFER_FLUSH(ah);
}
+void ath9k_hw_read_array(struct ath_hw *ah, u32 array[][2], int size)
+{
+ u32 *tmp_reg_list, *tmp_data;
+ int i;
+
+ tmp_reg_list = kmalloc(size * sizeof(u32), GFP_KERNEL);
+ tmp_data = kmalloc(size * sizeof(u32), GFP_KERNEL);
+
+ for (i = 0; i < size; i++)
+ tmp_reg_list[i] = array[i][0];
+
+ REG_READ_MULTI(ah, tmp_reg_list, tmp_data, size);
+
+ for (i = 0; i < size; i++)
+ array[i][1] = tmp_data[i];
+
+ kfree(tmp_reg_list);
+ kfree(tmp_data);
+}
+
u32 ath9k_hw_reverse_bits(u32 val, u32 n)
{
u32 retval;
@@ -138,6 +138,8 @@
#define REG_WRITE_ARRAY(iniarray, column, regWr) \
ath9k_hw_write_array(ah, iniarray, column, &(regWr))
+#define REG_READ_ARRAY(ah, array, size) \
+ ath9k_hw_read_array(ah, array, size)
#define AR_GPIO_OUTPUT_MUX_AS_OUTPUT 0
#define AR_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED 1
@@ -1020,6 +1022,7 @@ void ath9k_hw_synth_delay(struct ath_hw *ah, struct ath9k_channel *chan,
bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout);
void ath9k_hw_write_array(struct ath_hw *ah, const struct ar5416IniArray *array,
int column, unsigned int *writecnt);
+void ath9k_hw_read_array(struct ath_hw *ah, u32 array[][2], int size);
u32 ath9k_hw_reverse_bits(u32 val, u32 n);
u16 ath9k_hw_computetxtime(struct ath_hw *ah,
u8 phy, int kbps,
REG_READ generate most overhead on usb bus. It send and read micro packages and reduce usb bandwidth. To reduce this overhead we should read in batches. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> --- drivers/net/wireless/ath/ath9k/hw.c | 20 ++++++++++++++++++++ drivers/net/wireless/ath/ath9k/hw.h | 3 +++ 2 files changed, 23 insertions(+)